PCMCIA Ethernet/Fax/Modem
Installation for Microsoft Windows 95/98
Contents
--------
Introduction
Getting Started
Troubleshooting
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
------------
Windows 95/98 provides a complete "Plug n' Play" System that will
automatically recognize and configure most PC Cards.
Before inserting your LanModem PC Card, the system's PCMCIA chipset
must be enabled and functioning. The PCMCIA chipset is responsible
for controlling the systems interface for PC Cards. Please consult
the system's manual or the manufacturer for use with Windows 95/98.
Multifunction PC Cards put a heavy demand on a system's resources.
Please resolve all system conflicts, errors, or other Windows issues
before installing the LanModem.
Please have the Windows 95/98 installation media ready to accomodate
any requests for files.
Getting Started
---------------
With the system off, remove all PC Cards
Start/Boot into Windows
Remove any previous Network Setup
-Press the START button on task bar
-Select SETTINGS
-Select CONTROL PANEL
-Select NETWORK SETTINGS
-Highlight each network support entry and press REMOVE
-After all network support is removed, press OK
Insert the LanModem into one of the system's PCMCIA Slots
A "New Hardware Found" dialog box should appear, see
troubleshooting if the dialog box doesn't appear.
Select "Driver from disk provided by hardware manufacturer"
Insert the LanModem driver disk in drive A:
Type in the path name A:\
Because the device is multifunction, the system will repeat
the "New Hardware Found" a few times. Please repeat the same
steps for each request made by the system.
The Window 95/98 PCMCIA installation will add Netware and Microsoft
network support automatically. Any network support can be adjusted
by the Network Support in the Control Panel.
Troubleshooting
---------------
If the "New Hardware Found" dialog box doesn't appear.
-Run REGEDIT
-Select "HKEY_LOCAL_MACHINE"
-Select "Enum"
-Select "PCMCIA"
-Highlight the folder "MULTIMOBILE-MT5634ZLXI/E-XXXX"
-Press the <Delete> key to delete the association
Support Options
---------------
We are consistently improving and upgrading our drivers. You are
welcome at any time to browse our BBS or FTP site to download
drivers, utilities and help files.
If you still cannot get the LanModem working properly, our
technical experts are always ready to help. Please be at your
computer, have your LanModem, Drivers Disk, and the following
information available:
* Version number of any drivers you are running
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
---------------------------------------
All references to Microsoft Windows, Windows 95, Windows 98, or Windows NT,
are rights reserved by Microsoft Corporation
All references to Novell, ODI, Netware, NW, IPX, IPXODI, and LSL are
rights reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.