PCMCIA Ethernet/Fax/Modem
Award Cardware Installation
Contents
--------
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
------------
The Cardware utilities are supplied by Award and Ventura.
To use the PCMCIA LanModem card with the Cardware software
requires no further intervention.
When the card is inserted it will beep. Use CARDCHEK.EXE to
check that the card has been configured correctly (look at the
"PCMCIA Hardware" option).
Getting Started
---------------
Older versions (dated before 1/7/93)
------------------------------------
Run the 'PC Card Control for Windows' program under Windows.
If Windows is not installed, edit the CARDWARE.INI file as
indicated at the end of this section.
Make sure the LanModem card is inserted into one of your PC's sockets.
Run 'PC Card Control for Windows' from the Cardware sub-directory.
Press 'OK' buttons on any card detect errors until you get to the
main menu.
Select the 'Cards' option and choose 'Edit'.
Select Socket A (or wherever the LanModem Card is located) and
press Enter. If you already have a device in the Defined box
called LanModem then skip the next 7 steps.
Select 'New Device' under the 'Defined' devices box.
Edit the new device to be named 'MT5634ZLXI/E'.
Select IO range 1 Base(Hex) = 300, Length = 32 (16 bit).
Select IO range 2 Base(Hex) = 2F8, Length = 8 (8 bit).
Do not alter Mem range 1 or 2.
Select IRQ level 3. Select OK to make changes.
Back on the 'Edit card' screen, highlight the 'MT5634ZLXI/E' device
in the defined devices box.
Transfer the LanModem to the 'Associated' box with the 'Include'
command.
Select OK to complete editing and return to main screen.
If the LanModem card is not graphically depicted, choose 'Card'
and 'Reconfigure' the socket which contains the LanModem card.
If the card is still not configured exit Windows and check that the
CARDWARE.INI file in the CARDWARE sub-directory has had the
following changes made:
CARDWARE.INI
------------
[Cards]
NumberOfRecords=1
1=MultiTech MT5634ZLXI/E, 13, 6, -1,MultiTech, MT5634ZLXI/E
[SpecificAssociations]
NumberOfRecords=1
1=6
[LogicalDevices]
NumberOfRecords=6
;name, memBase, memSize, IOBase, IOSize, IRQ, IO2Base, IO2Size, Type, mem2Base, mem2Size, flags
6=MT5634ZLXI/E, 0X0, 0X0, 0X300, 0X20, 0X3, 0X2F8, 0X8, 0X0, 0X0, 0X0, 0X0
;Note that the 'NumberOfxxx' numbers may vary from those shown here.
;Ensure also that the 'resources' section in the CardWare.ini file has
;requested the system resources for the Card. This should include
;the line as follows:
[Resources]
I/O=0X300,0X20,E,10
Then whenever you insert the LanModem Card it will automatically be
configured by the Award software.
If you still have problems with CARDWARE software try replacing
your CARDWARE.INI file with the one supplied on the LanModem Card
Drivers Disk.
Support Options
---------------
We are consistently improving and upgrading our drivers. You are
welcome at any time to browse our BBS or FTP site to download
drivers, utilities and help files.
If you still cannot get the LanModem working properly, our
technical experts are always ready to help. Please be at your
computer, have your LanModem, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE and any drivers you are running
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
---------------------------------------
All references to Microsoft, Windows, Windows 95, Windows 98, or Windows NT
are rights reserved by Microsoft Corporation
All references to Novell, ODI, Netware, NW, IPX, IPXODI, and LSL are
rights reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.