PCMCIA Ethernet/Fax/Modem
DECnet PathWork v4.x Installation
Contents
--------
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
------------
This installation assumes that the PCMCIA drivers are working
properly. Getting Started will describe the installation for
Pathworks 4.x.
Getting Started
---------------
DECnet PathWork provides a NETSET.EXE program for installing NDIS
drivers. For information on the usage of this program, please refer
to the DECnet installation manual.
Install DECnet PathWork selecting 3Com's Etherlink II card.
Modify your CONFIG.SYS file to include the following lines:
device = c:\decnet\ELNKII.SYS
to
device = c:\decnet\LMNDIS.DOS
Modify the following lines in your PROTOCOL.INI file:
[ELNKMACII]
drivername = ELNKII$
ioaddress = 0x320
interrupt = 11
xmitbufs = 2
[IPX4MAC]
:
bindings = ELNKMACII
:
[DATALINK]
:
bindings = ELNKMACII
:
to:
[LM28_NIF]
drivername = LMNDIS$
[IPX4MAC]
:
bindings = LM28_NIF
:
[DATALINK]
:
bindings = LM28_NIF
:
Support Options
---------------
We are consistently improving and upgrading our drivers. You are
welcome at any time to browse our BBS or FTP site to download
drivers, utilities and help files.
If you still cannot get the LanModem working properly, our
technical experts are always ready to help. Please be at your
computer, have your LanModem, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are running
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
---------------------------------------
All references to Microsoft, Windows, Windows 95, Windows 98, or Windows NT
are rights reserved by Microsoft Corporation
All references to Novell, ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.