PCMCIA Ethernet/Fax/Modem
IBM Lan Support and Lan Services Installation
Contents
--------
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Getting Started
---------------
***IBM Lan Support 2.x (see below for Lan Services 4.x)
Please use Method 1 or 2 for this installation
Method 1 -- Using the .NIF file: (Must use LM28IBM.NIF)
Insert the LAN Support diskette in Drive A.
Run the install program.
A:\DXMAID [Enter]
The following message then appears:
"Do you have driver diskettes?" [Yes]
Use the Spacebar to switch between "no" and "yes".
After copying LAN Support specify the drive and path of the
DOS NDIS files.
For example: A:\NDIS2 [Enter]
The installation procedure terminates after copying the
necessary file.
Method 2 -- Modifying the contents of the CONFIG.SYS and
PROTOCOL.INI files after installing other NICs:
Copy the LMNDIS.DOS file to the directory where your IBM LAN
Support program resides.
Modify the NDIS device driver statement in the CONFIG.SYS
as follows:
DEVICE = [drive]:\path\LMNDIS.DOS
Modify the PROTOCOL.INI file as follows:
BINDINGS = LM28IBM_NIF
:
:
[LM28IBM_NIF]
DRIVERNAME = LMNDIS$
*** IBM LAN Services v4.x
Execute the installation program from the IBM DOS LAN SERVICES
diskette
Type: a:\install
From the Network card field, select "Network card not shown in list
below...".
Specify the path for the corresponding oemsetup.inf file of the OEM
driver intended for use. Then press Enter. The program then
displays the driver name.
Check that the driver configuration is correct.
Complete the installation and restart your system to use the DOS LAN
Services.
Support Options
---------------
We are consistently improving and upgrading our drivers. You are
welcome at any time to browse our BBS or FTP site to download
drivers, utilities and help files.
If you still cannot get the LanModem working properly, our
technical experts are always ready to help. Please be at your
computer, have your LanModem, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are running
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
---------------------------------------
All references to Microsoft, Windows, Windows 95, Windows 98, or Windows NT
are rights reserved by Microsoft Corporation
All references to Novell, ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.