;/* ;*** Copyright (c) 1997 *** ;*** Shark Multimedia, Inc. *** ; MODULE NAME: rwa95.inf ; ; ; ; DESCRIPTION: ; ; This module is the .INF file for Windows 95 installation of ; Rockwell WaveArtist ; ;****************************************************************** ;****************************************************************** ;****************************************************************** ;*/ [Version] Signature="$CHICAGO$" Class=MEDIA provider=%RSSMfgName% LayoutFile=Layout.inf [Manufacturer] %RSSMfgName%=Rockwell [Rockwell] %*RSS5000.DeviceDesc%=RSS5000_Device, *RSS5000 %*RSS5001.DeviceDesc%=RSS5001_Device, *RSS5001 %*RSS5002.DeviceDesc%=RSS5002_Device, *RSS5002 %*RSS5004.DeviceDesc%=RSS5004_Device, *RSS5004 %*RSS5003.DeviceDesc%=RSS5003_Device, *RSS5003 %*RSS5005.DeviceDesc%=RSS5005_Device, *RSS5005 %*RSS5006.DeviceDesc%=RSS5006_Device, *RSS5006 [PreCopySection] HKR,,NoSetupUI,,1 [ClassInstall] AddReg=Class.AddReg [Class.AddReg] HKR,,,,%MediaClassName% HKR,,Icon,,"-1" HKR,,Installer,,mmci.dll ;;; Install Section for WaveArtist PnP Logical Device 0 ;;; which is the Command/Status Interface [RSS5000_Device] CopyFiles=RSS5000.CopyList AddReg=RSS5000.AddReg UpdateIniFields=Drivers.fields ;;; Install Section for WaveArtist PnP Logical Device 1 ;;; which is the SB Pro Emulation I/F. [RSS5001_Device] CopyFiles=RSS5001.CopyList Addreg=RSS5001.AddReg UpdateIniFields=Drivers.fields ;MPU-401 Emulation device (logical device 2) AND Master Node ;With Ring 3 Driver [RSS5002_Device] CopyFiles=RSS5002.CopyList, WSTREAM.CopyList, MARGE2.CopyList AddReg=WAVE.AddReg, MIXER.AddReg, RSS5002.AddReg UpdateInis=PnPId.Section UpdateIniFields=Drivers.fields UpdateAutoBat=SetwaPnp.Section [PnPId.Section] RWA95DOS.INI,Rwa.Drv,,"PnPId=%OEMPID%" ;Analog 3D -- device #4 [RSS5006_Device] ;Disabled CDROM Logical device #4 [RSS5003_Device] ;Disabled Modem Logical device #3 [RSS5005_Device] ;Game Port: Logical device #5 [RSS5004_Device] AddReg=RSS5004.AddReg UpdateInis=RSS5004.UpdateInis ;################################################################## ;# OEM Selectable CD-Rom Option ;################################################################## ; ;CHOOSE ONLY ONE OF THE FOLLOWING SECTIONS ; ;If the CD-Rom IDE port is available, use the ;SECOND SECTION and comment out the FIRST SECTION. ; ;If the CD-Rom IDE port is not available, use the ;FIRST SECTION and comment out the SECOND SECTION ;!!!!!!! < FIRST SECTION > CD-Rom not in use CopyFiles=RSS5004.CopyList ;!!!!!!! < SECOND SECTION > CD-Rom in use ;CopyFiles=RSS5004.CopyList, RWAPNP.CopyList, @rwacpl95.cpl ;UpdateCfgSys=RWAPNP.Section ;Reboot ;################################################################## ;################################################################## [RSS5000.CopyList] rwa95vxd.vxd,,,2 ;rwa95drv.drv,,,2 [RSS5002.CopyList] rwa95vxd.vxd,,,2 rwa95drv.drv,,,2 rwawsdrv.drv,,,2 msopl.drv,,, rwados95.exe,,,2 setwapnp.exe,,,2 rwautoex.exe,,,2 rwamixer.exe,,,2 rwaunin.exe,,,2 ctl3dv2.dll,,,2 [RSS5001.CopyList] rwa95vxd.vxd,,,2 ;rwa95drv.drv,,,2 [RSS5004.CopyList] vjoyd.vxd,,, msjstick.drv,,, [WSTREAM.CopyList] wstream.dll,, msgloop.exe,, vwstream.vxd,, [MARGE2.CopyList] marge2.lst,, hall.mal,, clear32.mal,, chorus.mal,, c2hall2b.mal,, [RWAPNP.CopyList] rwapnp.sys rwacpl95.cpl,,,2 [RWAPNP.Section] DevAddDev=RWAPNP.SYS,device,,"/IO 170 /IO2 360 /IRQ 15" [DestinationDirs] MARGE2.CopyList=10,media RWAPNP.CopyList=30 DefaultDestDir=11 ;run utility to edit autoexec and dosstart.bat to run setwapnp ;at right time so we can "restart in MS-DOS Mode" without losing ;PnP settings [SetwaPnp.Section] CmdDel=RWADOS95 CmdDel=SETWAPNP CmdAdd=RWADOS95 CmdAdd=SETWAPNP," /CLR" [Drivers.fields] system.ini,boot,drivers,msmixmgr.dll system.ini,boot,drivers,mmmixer.dll [RSS5004.UpdateInis] system.ini,drivers,"joystick=" [RSS5000.AddReg] HKR,,Driver,,rwa95vxd.vxd HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 [RSS5002.AddReg] HKR,,Driver,,"rwa95vxd.vxd vwstream.vxd" HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\wave\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\aux\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\mixer\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\midi\msopl.drv,Driver,,msopl.drv HKR,Drivers\midi\msopl.drv,Description,,%WAFM.DeviceDesc% HKR,Drivers\midi\rwa95drv.drv,Driver,,rwa95drv.drv HKR,Drivers\midi\rwa95drv.drv,Description,,%WAMPU.DeviceDesc% HKR,Drivers\midi\rwa95drv.drv,External,1,01,00,00,00 HKR,Drivers\midi\rwa95ws,Driver,,rwawsdrv.drv HKR,Drivers\midi\rwa95ws,Description,,%WSTREAM.DeviceDesc% HKR,,EnumPropPages,,"rwa95drv.drv,DrvEnumPropPages" HKR,Drivers,SubClasses,,"wave,midi,aux,mixer" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM Selectable Flex Mixer Options ;;; ;;; See document FlexMix.Doc ;;; HKR,Config,NameAux1,,CD HKR,Config,NameAux2In,,"" HKR,Config,NameAux2Out,,WaveTBL HKR,Config,NameMonoOut,,"" HKR,Config,NameLineIn,,Line HKR,Config,OptMasterMax,1,FF HKR,Config,OptAnalogFX,1,0 HKR,Config,OptStereoMic,1,0 HKR,Config,OptTreBass,1,0 ;;; (there's one more in the next section);;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; OEM Selectable Hardware 3D Option ;;; ;;; NOTE: The entry OptHardware3D (below) should be edited to match the OEMs hardware. ;;; The "0" option (default) indicates no external hardware 3D circuitry has been ;;; added by the OEM. The "1" option, indicates that the base address of the first ;;; IO Address range for WaveArtist logical device #3 (IDE) should be used as a ;;; write only location in Bit 7, to enable/disable the OEM added 3D circuitry. ;;; The "2" option indicates that the 2nd IO address range of this logical device ;;; should be used as the (bit 7) output 3D enable port. ;;; Note that for systems which support both a WaveArtist IDE and the 3D, that "2" ;;; option should be used because it is not used in normal IDE operation. ;;; ;;; In other words: First Line Below is for no external 3d. ;;; Second Line Below is for external 3d and no IDE. ;;; Third Line Below is for external 3d and IDE. ;;; ;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;----------------------Uncomment one and only one of the following 3 lines! ---------- HKR,Config,OptHardware3D,1,00 ;HKR,Config,OptHardware3D,1,01 ;HKR,Config,OptHardware3D,1,02 ;----------------------Uncomment one and only one of the previous 3 lines! ----------- ;uninstaller installation HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\WaveArtist,DisplayName,,"%UninstallName%" HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\WaveArtist,UninstallString,,"rwaunin.exe" [RSS5001.AddReg] HKR,,Driver,,rwa95vxd.vxd HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 [MIXER.AddReg] HKLM,Software\Microsoft\Windows\CurrentVersion\Run,SystemTray,,"SysTray.Exe" HKLM,%KEY_IOC%\Vol,,, [WAVE.AddReg] HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\midi,,, HKR,Drivers\wave,,, HKR,Drivers\mixer,,, HKR,Drivers\aux,,, HKLM,%KEY_IOC%\acm,,, HKLM,%KEY_IOC%\Rec,,, HKLM,%KEY_IOC%\MPlay,,, [RSS5004.AddReg] HKR,,DevLoader,,mmdevldr.vxd HKR,Drivers,MIGRATED,,0 HKR,Drivers\joystick,,, HKR,,Driver,,vjoyd.vxd HKR,Drivers\joystick\msjstick.drv,Description,,%* RSS5004.DeviceDesc% HKR,Drivers\joystick\msjstick.drv,Driver,,msjstick.drv HKR,Drivers,SubClasses,,"joystick" [SourceDisksNames] 1=%DName%,RWA95,0000-0000 ; Our disky, label "RWA95", default serial num [SourceDisksFiles] ; Files found on which disks (for now include ms files) rwa95vxd.vxd=1 ; our VXD rwa95drv.drv=1 ; our Ring 3 driver [DestinationDirs] DefaultDestDir = 11 ; LDID_SYS ;---------------------------------------------------------------; [Strings] ;Non-localized strings ;KEY_WARNVER="SYSTEM\CurrentControlSet\Control\SessionManager\WarnVerDLLs" ;KEY_CHKVER="SYSTEM\CurrentControlSet\Control\SessionManager\CheckVerDLLs" KEY_IOC="SYSTEM\CurrentControlSet\Control\MediaResources\InstallOptionalComponents" ;Localized strings RSSMfgName=Rockwell MfgName="Microsoft" *RSS5000.DeviceDesc="SMI III WaveArtist Enhanced Mixer Command/Status I/F" *RSS5001.DeviceDesc="SMI III WaveArtist Adlib, Sound Blaster Interface" *RSS5002.DeviceDesc="SMI III Master Control Node and MIDI Port for WaveArtist" *RSS5003.DeviceDesc="SMI III WaveArtist Unused (CD-ROM)" *RSS5005.DeviceDesc="SMI III WaveArtist Unused (Modem)" *RSS5004.DeviceDesc="SMI III WaveArtist Joystick/GamePort" *RSS5006.DeviceDesc="SMI III WaveArtist Hardware Analog 3D Port" WAFM.DeviceDesc="SMI III WaveArtist FM Synthesizer" WAMPU.DeviceDesc="SMI III WaveArtist MPU-401" WSTREAM.DeviceDesc="WaveStream Music Synthesizer" Joystick.DeviceDesc="SMI III WaveArtist Gameport Joystick" MediaClassName="Sound, video and game controllers" DName="WaveArtist Installation Diskette" UninstallName="SMI III WaveArtist Audio Device Drivers" OEMPID = "SMM5000"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.