[DESTINATIONS] VolShortName=Master Vol VolLongName=Master Volume RecShortName=Rec RecLongName=Recording Control VoiceShortName=Voice VoiceLongName=Voice Commands [SOURCES] CDShortName=CD CDLongName=CD AuxShortName=WaveTBL AuxLongName=WaveTable VideoDisable=1 VideoShortName= VideoLongName= SynthShortName=FM SynthLongName=Internal FM MicShortName=Mic MicLongName=Mic LineShortName=Line LineLongName=Line M OutDisable=1 ModemDisable=1 LOutDisable=1 LOutShortName=LineO LOutLongName= I2S0ShortName=A3D I2S0LongName=Aureal 3D ;I2S0 I2S1Disable=1 I2S1ShortName=I2S1 I2S1LongName=I2S1 PhatShortName=3D PhatLongName=3D Voice ;M InDisable=0 M InShortName=Phone M InLongName=Phone [CONTROLS] XC0Disable=1 XC1Disable=1 AGC 20dBDisable=1 Record Source Voice Source Master Volume Master Mute CD VolumeShortName=IntCD Aux VolumeShortName=AuxWT Video Volume Wave Volume Synth Volume Mic Out Volume Line-In Volume MonoIn VolumeDisable=0 M Out VolumeDisable=1 Modem VolumeDisable=1 I2S0 Volume I2S1 Volume ;CD Mute ;Aux Mute Video Mute Voice Mute Synth Mute Mic Mute ;Line-In Mute M In Mute M Out MuteDisable=1 Modem MuteDisable=1 I2S0 Mute I2S1 Mute [SETTINGS] ;Set the PnP VendorID (used with AD1816(A) with external eeprom and VendorID ; different than ADS7180). This is used by the remove program. VendorID=SMM7180 ;Use this section to establish default setting at installation time ;These are binary settings. 0 = FALSE, any other number = TRUE DACMute=0 ; Wave output MicMute=0 LineInMute=0 CDMute=0 AuxMute=0 VidMute=1 MonoInMute=0 ModemMute=1 I2S0Mute I2S1Mute=1 WaveMicAGC=0 VoiceMicAGC=0 Mic20dB=0 XCTL0=0 XCTL1=0 MonoOutMute=0 FMMute=1 3DOn=0 HwVolume=1 ; Show control on property page = 1, don't show = 0 EnableHwVol=0 ; Default HwVolume enable setting (1=enable, 0 = disable) CalibrateVolume=0 ; Show Calibration buttons = 1 ;These are volume settings. 0 to 65535 decimal WaveInAux1=32767 WaveInAux2=32767 WaveInAux3=32767 WaveInLine=32767 WaveInLOut=32767 WaveInMic=32767 WaveInModem=32767 VoiceInAux1=32767 VoiceInAux2=32767 VoiceInAux3=32767 VoiceInLine=32767 VoiceInLOut=32767 VoiceInMic=32767 VoiceInModem=32767 DACVol=32767 ; Wave output FMSynthVol=32767 LineInVol=32767 MicVol=0 CDVol=10000 AuxVol=10000 VidVol=0 I2S0Vol=50000 I2S1Vol=0 MonoInVol=0 ModemVol=0 3DLevel=0 MonoOutVol=0 MasterVol=32767 Bass=32767 Treble=32767 I2S0Format=1 ;0=Off, 1=Right justified, 2=I2S justified, 3=Left justified I2S1Format=1 HwVolMin=12 ; Default settings for Hardware volume Min and Max HwVolMax=72 ; ;Set default Capture source ; Line, LOut, CD, Mic, Aux, Video WaveInSource=Mic VoiceInSource=MicDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.