OEMSETUP.INF Driver File Contents (U320Windows.zip)

;----------------------------------------------------------------
;
; OEMSETUP.INF -- This is the INF that supports 
;                Adaptec Ultra320 SCSI Controllers for 
;                Windows NT 4.0
;
; Copyright 2003 Adaptec, Inc. All rights reserved.
; 
; This software contains the valuable trade secrets of Adaptec 
; or its licensors. The software is protected under international 
; copyright laws and treaties. This software may only be used in 
; accordance with the terms of its accompanying license agreement.
;
;----------------------------------------------------------------

;----------------------------------------------------------------
;
; [Version]
;
; Class and ClassGUID are defined in devguid.h
;
;----------------------------------------------------------------
[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%INF_PROVIDER%
;CatalogFile.ntx86=""   ; For Windows NT (x86)

;----------------------------------------------------------------
;
; [SourceDisksNames]
;
; diskid = description[,[tagfile][,<unused>,subdir]]
;
;----------------------------------------------------------------
[SourceDisksNames]
1 = %FLOPPY_DESCRIPTION%,,,

;----------------------------------------------------------------
;
; [SourceDisksFiles.x86]
;
; filename_on_source = diskid[,[subdir][,size]]
;
;----------------------------------------------------------------
[SourceDisksFiles]
;aic78xx.sys= 1,,70864,,,,,,
;aic78u2.sys= 1,,80976,,,,,,
;adpu160m.sys= 1,,100000,,,,,,
adpu320.sys= 1,,100000,,,,,,

;----------------------------------------------------------------
;
; [Manufacturer]
;
; manufacturer-name 
; %strkey%=models-section-name
; [%strkey%=models-section-name] ...
;
;----------------------------------------------------------------
; Table of Contents
[Manufacturer]
%ADP%= ADAPTEC

;----------------------------------------------------------------
;
; [ControlFlags]
;
;----------------------------------------------------------------
;[ControlFlags]
;ExcludFromFiles.x86=
;CopyFilesOnly=

;----------------------------------------------------------------
;
; Models
;
; device-description=install-section-name,hw-id[,compatible-id...]
;
; "*" indicates that device is supported by more than one
;     enumerator.
;
;----------------------------------------------------------------
[ADAPTEC]
;%*78XX40.DeviceDesc%= AIC78XX,*AIC78XX
;%*78U240.DeviceDesc%= AIC78U2,*AIC78U2
%*U32040.DeviceDesc%= ADPU320,*ADPU320

;----------------------------------------------------------------
;
; Install
;
;----------------------------------------------------------------
;[AIC78XX.NT]
;CopyFiles=@AIC78XX.SYS

;[AIC78U2.NT]
;CopyFiles=@AIC78U2.SYS

[ADPU320.NT]
CopyFiles=HotplugRegfile
CopyFiles=Driver


;----------------------------------------------------------------
;
; Services
;
; Flag = 0x1 (SPSVCINST_TAGTOFRONT)
;        Make sure that device loads at
;        the front of its group
;
;----------------------------------------------------------------
;[AIC78XX.NT.Services]
;AddService = aic78xx, 0x2, aic78xx_Service_Inst, Miniport_EventLog_Inst,,

;[AIC78U2.NT.Services]
;AddService = aic78u2, 0x2, aic78u2_Service_Inst, Miniport_EventLog_Inst,,

[ADPU320.NT.Services]
AddService = adpu320, 0x2, adpu320_Service_Inst, Miniport_EventLog_Inst,,

;[aic78xx_Service_Inst]
;ServiceType    = 1      ; SERVICE_KERNEL_DRIVER
;StartType      = 0      ; SERVICE_BOOT_START
;ErrorControl   = 1      ; SERVICE_ERROR_NORMAL
;ServiceBinary  = %12%\aic78xx.sys
;LoadOrderGroup = SCSI Miniport

;[aic78u2_Service_Inst]
;ServiceType    = 1      ; SERVICE_KERNEL_DRIVER
;StartType      = 0      ; SERVICE_BOOT_START
;ErrorControl   = 1      ; SERVICE_ERROR_NORMAL
;ServiceBinary  = %12%\aic78u2.sys
;LoadOrderGroup = SCSI Miniport

[adpu320_Service_Inst]
ServiceType    = 1      ; SERVICE_KERNEL_DRIVER
StartType      = 0      ; SERVICE_BOOT_START
ErrorControl   = 1      ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\adpu320.sys
LoadOrderGroup = SCSI Miniport


;----------------------------------------------------------------
;
; Event Log Install
;
;The NT EventLog entries are the same for all SCSI miniports.
;
;----------------------------------------------------------------
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,0x00010001,7

;Driver tunables
HKLM,"SYSTEM\CurrentControlSet\Services\adpu320\Parameters\Device","NumberOfRequests",0x10001,255
HKLM,"SYSTEM\CurrentControlSet\Services\adpu320\Parameters\Device","MaximumSGList",0x10001,65
HKLM,Software\Compaq\CpqRcmc\ClassDLLs\SCSIMiniport,"ClassID",0x10001,1
HKLM,Software\Compaq\CpqRcmc\ClassDLLs\SCSIMiniport,"DLLName",0x00000000,"CQRSCSMN.DLL"
HKLM,Software\Compaq\CpqRcmc\ClassDLLs\SCSIMiniport\adpu320,"HPPSignature",0x00000000,"CPQHPP"
HKLM,System\CurrentControlSet\Services\adpu320\Parameters\Device,"DriverParameter",0x00000000,"/HPPNVRAM /HOTPLUG /MAXTAGS=32"
HKLM,System\CurrentControlSet\Services\adpu320,"Tag",0x10001,0x20

;----------------------------------------------------------------
;
; [DestinationDirs]
;
; file-list-section=dirid[,subdir]] ... 
;
;----------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 12             ; DIRID_DRIVERS (this is IOSubsys on
				; Win95, and System32\Drivers on NT)
HotplugRegfile = 11                             ; \Winnt\system32 dir
Driver = 12

[HotplugRegFile]
hotp320.reg                                    ; This file is used to add PCI-HotPlug related registry entries

[Driver]
adpu320.sys

;----------------------------------------------------------------
;
; [Strings]
;
;----------------------------------------------------------------
[Strings]
INF_PROVIDER="Adaptec"
ADP="Adaptec"
FLOPPY_DESCRIPTION="Adaptec Ultra320 Family Manager Set - Microsoft Disk"
*U32040.DeviceDesc = "Adaptec Ultra320 SCSI Cards (WinNT 4.0)"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.07