readme.txt Driver File Contents (sp12778.exe)

Instructions for Installing the eeE Driver for SCO OpenDeskTop 
1. Copy the eee*.img file to any directory, such as /tmp, on the 
   SCO system.
2. Transfer the file to a 3.5 inch floppy disk using 'dd'. For example:
        # dd if=/tmp/eee.img of=/dev/dsk/f03ht
3. If there is an older version of the eeE driver on the system, you 
   must first remove it. To do this, run 'netconfig'. Remove all 
   instances of the "Intel ..." adapters. Exit netconfig 
   without opting to relink the kernel. Run 'custom'. Remove
   the older Intel adapter driver. 

4. Using 'custom', install the new driver from the floppy disk. After 
   the installation of the driver is complete, exit from 'custom'.
5. Run 'netconfig'. Add the adapters. For each adapter that is present 
   in the system, enter the appropriate TCP/IP parameters. Exit 
   'netconfig' and choose to relink the kernel.
6. Reboot the system.
NOTE: The adapter automatically detects the link speed and duplex mode. 
If you want to force any of these settings, edit the file 
'/etc/conf/pack.d/eeE/space.c'. Modify the value of the 
eeE_LineSpeedDuplex variable to set the line speed and duplex mode for 
each board in the system. (The space.c file has the values for setting 
this variable). Save the file. Rebuild the Unix kernel using 'idbuild' 
and reboot the system. 

CAUTION: This should be done by expert Unix system users only.

* Third-party trademarks are the property of their respective owners.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.76