dminet.txt Driver File Contents (sp12778.exe)

Intel DMI-SNMP Client Instrumentation  v1.0.0

Release Notes
This file contains the following sections:

- Release contents
- Target Environments
- Summary of Features
- Prerequisites.
- Installation instructions
- Usage with Applications.
- Unsupported features in the Intel DMI-SNMP Client Instrumentation
- Reference files / screens

Release contents:
IntelNDM.nlm -  Intel DMI-SNMP Network Device Manager NLM, Version 1.00

Intel_NI.nlm -  Intel DMI-SNMP Client Instrumentation NLM, Version 1.00

Intel_NI.mif -  Intel DMI-SNMP Client Instrumentation MIF, version 1.0 
MIF file.

IntelDrv.dat -  Intel DMI-SNMP managed Drivers Name and Export Symbols,
version 1.0 DAT file. 

DMI2SNMP.NLM -  Intel SNMP Extension module

Intel.mib -  Intel Master MIB

Intelnic.mib  -  Intel Network Interface Card MIB

Target Environments
Novell NetWare* 4.11

Summary of Features

a. Features

This release provides the following features:

- Supports only Pro 100 and Pro 1000 PCI based Ethernet boards 

- Has been tested only with the Intel DMI service Provider, 
  HP-OpenView* Network Node Manager 5.0, Intel Deviceview for web
  and Intel DMI Explorer.

- Operating System: Novell NetWare 4.11

b. Attributes Support

The following shows what you should expect to see: 

    GROUP           ATTRIBUTE                    SUPPORT
~~~~~~~~~~~~~~  ~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Component ID    Manufacturer     Yes
                Product          Yes
                Version          No
                Serial Number    No
                Installation     Yes
                Verification     Yes

802 Driver      Index            Yes
                Name             Yes
                Version          Yes
                Description      Yes
                Size             Yes
                Interface        Yes
                Interface Ver.   Yes
                Interface Desc.  Yes

802 Port        Index            Yes
                Permanent addr.  Yes
                Current addr.    Yes
                Connector type   Yes
                Data rate        Yes
                Packets xmitted  Yes
                Bytes xmitted    No
                Packets rcv'd    Yes
                Bytes rcv'd      No
                Xmit errors      Yes
                Receive errors   Yes
                Host errors      Yes
                Network errors   Yes

Ether Group

  Number of frames recv'd with checksum errors       Yes.
  Frames received with alignment error               Yes.
  Frames transmitted with one collision              Yes.
  Frames transmitted with more than one collision    Yes.
  Frames transmitted after deferral                  Yes.
  Frames not transmitted due to collisions           Yes.
  Frames not received due to overrun                 Yes.
  Frames not transmitted due to underrun             Yes.
  SQE Test Errors                                     No.
  Times carrier sense signal lost                    Yes.
  Late collisions detected                           Yes.
  Frames received with errors                        Yes.
  Ethernet Chip set                                  Yes.

  1. Novell NetWare v4.11
  2. Novell NetWare SNMP Master Agent.
  3. Intel DMI Service Provider. Please download the Service provider
     from and follow
     installation instructions.  

 Note:  It is strongly recommended that both NetWare SNMP and Intel 
        DMI Service Provider be installed before installing this

Installation instructions:
1. Install the Intel DMI Service provider for NetWare taking extra
care to follow the instructions provided with the download.  This
requires a Windows NT 4.0 station on your network to install from,
with your NetWare server mapped as a drive. 

2. On the NetWare server load the Install NLM from the command prompt.
Select Other Product options and appropriate Source drive e.g A:\dmi-snmp\snmp\nwserver

3. Follow the directions given by the 'Intel DMI-SNMP Client
Instrumentation' install from there.

Usage with Applications:
   1. With SNMP Agent: 
      - Make sure that NetWare SNMP Agent NLM and Intel DMI Service
        Provider are installed and configured

   2. With SNMP Manager: (HP-Open View etc.)
      - Load/compile  intel.mib and intelnic.mib

   3. Use Intel DMI Explorer or any other DMI compliant Management
      application on the Management Station (any Win32 Client connected
      to NetWare Server) to access management information. 

Unsupported features in the Intel DMI-SNMP Client Instrumentation

1. An exclusive Instrumentation directory for placing the NLM files



Screen Name                              Screen Description 
-----------                              -------------------

Intel DMI-SNMP Network Device Manager    Instrumentation Device manager

Intel DMI-SNMP Client Instrumentation    Component Instrumentation 


You may see the following messages under the specified conditions.

Condition: When the Instrumentation is up and running

   Context 1: Unload a driver managed by the DMI Client Instrumentation
   Message: Unloading the driver will cause DMI-SNMP Client 
   Instrumentation and Intel DMI-SNMP Network Device Manager 
   <Intel_NI.nlm and IntelNDM.nlm> not to support queries for its 

   Context 2: Load a driver managed by the DMI Client Instrumentation
   Message: You MUST unload Intel DMI-SNMP Network Client 
   Instrumentation and Intel DMI-SNMP Network Device Manager 
   <Intel_NI.nlm and IntelNDM.nlm> before loading a new LAN driver. If
   you load the driver anyway, unload and load Instrumentation
   immediately for SAFE functionality. Do not run queries WITHOUT
   performing above mentioned steps.

Version:  06/01/98

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.56