Personal NetWare
Installing and Configuring the Intel TokenExpress(TM) PRO
adapter DOS ODI Workstation Driver for Personal Netware
=========================================================
Location of Driver: disk 2 \NWCLIENT
General Instructions
--------------------
To install the TokenExpress PRO DOS ODI driver for Personal
NetWare, do the following:
1. Insert "Personal Netware Installation and Utilities 1" into
drive A:
2. Type "Install" and press enter. Follow the installation
instructions. Make sure you have your Personal NetWare manual
available for additional information.
3. Personal Netware will come to a screen that asks you to select
a "Primary Network Interface Card".
4. Either tab or click on the down arrow to select from a list of
adapters.
5. From the list of adapters select "OEM Supplied Drivers".
6. At the prompt to insert the driver disk in drive A:, insert the
TokenExpress PRO driver disk (disk #2) in drive A:. Type in
the path - A:\NWCLIENT and press enter.
7. The TokenExpress PRO Adapter will then be highlighted. Press
Enter and continue.
8. Follow the rest of the installation instructions.
Refer to your Personal NetWare manual for additional information on
this installation program.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.