LAN Server 3.0
Installing and Configuring the Intel TokenExpress(TM) PRO adapter driver
for IBM OS/2 V2.x with ES/2 and LAN Server V2.0 or LAN Server V3.0
========================================================================
Location of driver: disk 2 \IBMOS2\TPRO.OS2
General Installation
--------------------
Extended Services/2 Ver 1.0 - workstation adapter driver installation
---------------------------------------------------------------------
1. Start the Communication Manager and select "Advanced",
"Configuration", "LAN Adapter and Protocol Support". Then select
"Copy additional network adapter drivers". When requested, enter
the path to the driver (A:\IBMOS2\OS2) and insert disk 2.
2. After the drivers have been copied, select "Configure workstation"
and configure your workstation in accordance with your needs
(refer to the IBM documentation). If you want more information
about the parameters which may be used for configuring your
adapter driver, please refer to the section "Configuring the
MAC Driver" in the Adapter Guide to Operation.
3. The installation procedure copies the following files to the
\IBMCOM\MACS directory:
\IBMOS2\TPRO.OS2 TokenExpress PRO adapter driver
\IBMOS2\TPROEOS2.NIF TokenExpress PRO adapter network
interface file
(used by configuration utility)
LAN Server 2.0 - server adapter driver installation
---------------------------------------------------
1. Select LAN Services Installation/Configuration and select
Advanced installation.
2. Next select "Install and Configure this Workstation", "Configure a
component", "LAN Adapter and Protocol Support" and then "Copy
additional network adapter drivers". When requested, enter the
path to the driver (A:\IBMOS2) and insert disk 2.
3. After the adapter driver has been copied select "Configure
workstation" and configure your workstation in accordance with
your needs (refer the IBM documentation). If you want more
information about the parameters which may be used for
configuring your adapter driver, please refer to the section
"Configuring the MAC Driver" in the Adapter Guide to Operation.
4. When you have completed the installation and configuration the
following files will have been copied to the \IBMCOM\MACS
directory:
TPRO.OS2 TokenExpress PRO adapter driver
TPROEOS2.NIF TokenExpress PRO adapter network
interface file
(used by configuration utility)
LAN Server 3.0 - server adapter driver installation
---------------------------------------------------
If LAN Adapter Protocol Support (LAPS) is not installed,
1. Insert the 'IBM Network Transport Services/2, LAN Adapter and
Protocol Support' disk in drive A: and run the LAPS program
(i.e. A:\LAPS).
2. From the LAPS program's main menu, select "Install".
This installs the LAPS program on the computer's hard disk.
After the LAPS program has been installed on the hard disk, the
program's main menu displays with "Install", "Configure",
"Remove", "Exit", and "Help" options enabled. Continue the
installation with step 2 listed below.
If LAPS is already installed,
1. Run LAPS (LAPS.EXE) from the \IBMCOM directory.
2. From the main menu, select "Install".
This will install your adapter's drivers.
3. When prompted for the source path of your "Additional Network
Drivers", enter the path (i.e. A:\IBMOS2), insert disk 2, and
select "OK".
4. When the "Installation Completed" message appears on your
screen, select "OK".
Proceed to configure your TokenExpress PRO adapter by doing
the following:
5. From the LAPS main menu, select "Configure".
6. In the configuration dialog box, select "Configure LAN
Transport", then "Continue".
7. Select "Intel TokenExpress PRO" as your network adapter by
adding it to the "Current Configuration".
Edit your TokenExpress PRO adapter configuration parameters
by doing the following:
8. In the current configuration list, select "Intel TokenExpress
Pro Adapter".
9. Select "Edit".
10. Change the "I/O Base Address" to the value that corresponds
to the I/O base address of your adapter.
11. Select "OK" to save the new parameter value.
12. Add and configure any protocols or make any changes
to the TokenExpress PRO adapter to suit your requirements.
13. When you have finished configuring the LAN Transports, select "OK".
14. Exit from LAPS and select "Continue" to let LAPS update the
CONFIG.SYS file on your boot drive.
15. Follow the remaining LAPS instructions to complete your
installation.
16. Reboot your system to activate your TokenExpress PRO adapter.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.