Hardware specifications
System compatibility
--------------------
ISA - IBM AT and 100% compatibles
Token ring data rates
---------------------
Auto-sensed or software selectable 16 or 4 Mbps
Cable connections
-----------------
Auto-sensed:
- DB-9 for STP
- RJ-45 for UTP with on-board media filter
Data transfer mode
------------------
8-, 16-, or 32-bit programmed I/O
Token ring controller
---------------------
Intel 80186 with bus interface/protocol handler ASIC
Interrupt levels
----------------
2/9, 3, 4, 5, 7, 10, 11, or 12
I/O address
-----------
One 16-byte block in the 0200H-39FH range (except 270)
DRAM memory
-----------
128 Kbytes
Flash memory
------------
256 Kbytes
Power consumption
------------------
1.933 W @ +5 VDC
0.096 W @ +12 VDC
Current drawn
-------------
0.38 amp @ +5 VDC
0.008 amp @ +12 VDC
Dimensions
----------
3.5 inches by 6 inches
Certifications
--------------
- FCC Part 15, Class B
- VDE 0871, Class B
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.