1. inttok1.exe Driver
2. EISA.TXT File Contents

EISA.TXT Driver File Contents (inttok1.exe)

   ISA adapters in EISA slots

      
      You can install the TokenExpress(TM) PRO ISA adapter in an
      EISA slot. The installation procedure requires three 
      steps:
         
      1.  Putting the adapter in the computer.
      
      2.  Selecting the configuration settings from the 
          EISA Configuration Utility (ECU).
     
      3.  Configuring the adapter with TokenSet.

   
   Put the adapter in the computer
   ===============================

      Follow the procedure on page 3 of the Installation 
      Guide, but choose an EISA slot instead of an ISA slot.
 

   Select the configuration settings from the ECU
   ==============================================

      1.  Restart the computer and exit the flash program.
          You might need to boot from a clean DOS diskette or 
          bypass your memory manager driver (such as EMM386.SYS).

      2.  Run the most recent version of the ECU for this computer.

      3.  From the Main menu, select the command for 
          configuring the computer. When prompted, insert
          the Configuration disk. The configuration
          file for the adapter is !INT1020.CFG. 

      4.  The ECU doesn't automatically detect ISA 
          adapters. Write down the settings you want to 
          assign to the TokenExpress PRO adapter and exit
          the program. (You must choose settings that aren't
          used by other devices in the computer.)

   
   Configure the adapter with TokenSet
   =====================================

      1.  Insert the Configuration disk into a drive,
          switch to that drive, and type TOKENSET.

      2.  From the Main menu, select CHANGE ADAPTER 
          CONFIGURATION. 

      3.  Select the configuration settings you chose in the 
          EISA configuration program. 

      4.  Continue with the procedure on page 6 of the
          Installation Guide. 

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.