Smartlink Modio Version 1.24 - November 30, 1997 ================================================= Changes/Bug Fixes ----------------- - SCR #203 - When dialing from Phone Dialer, sometimes the other side can't hear you - SCR #278 - Adjust default values for S6,S7 for Korean PTT, HS Record level for Canadian PTT - SCR #265 - When calling Modio using Connectix VP appl, ring isn't detected by appl. - - Low rate connections problem - improved decision for 24000/26400 & 26400/28000 Smartlink Modio Version 1.23 - October 22, 1997 ================================================= Changes/Bug Fixes ----------------- - SCR #243 - Microphone is muted when switching from handset to speakerphone - SCR #256 - Sometimes voice modem can't accept calls - SCR #266 - Problem when using DirectSound in full duplex mode The new Key: HandsetRecordingGain [128] CallProgWaitForDialTone [2] /// Sec (sreg 6) CallProgWaitForCarrier [60] /// Sec (sreg 7) Smartlink Modio Version 1.22 - September 30, 1997 ================================================= Changes/Bug Fixes ----------------- - SCR #186 - Monitor Incoming call in Bitware - SCR #189 - Connectix Videophone recognizes Modio - SCR #193 - Support partial Dialing (;) - SCR #207 - Quicklink Message Center recognizes Modio - SCR #218 - Dialtone isn't detected when Modio dial out to TNC Mertz modem using HyperTerm - SCR #221 - Fax Tx problem with TNC Mertz using RingCentral appl. - SCR #230 - Fax Connects in 2400 bps - SCR #231,#232, #235, #236 - Fax Sending problems with Murrata/Panafax - SCR #233, #234 - Fax Tx/Rx problems with PCTEL 288 fax/modem card using BitWare appl - SCR #237 - Ring is not detected after playing back a message through the handset - SCR #239 - Connection fails when trying to connect with no automode - SCR #240 - ATW does not work properly - SCR #241 - V34 33.600 connection problems with ZoomK56 - SLLights Modio monitor was added - Cyrix M1,M2 processors supported - Joystick problems in DOS Box games ADI Singapore bug list: - (30) - V.22 problems with USR - (53) - hyperterminal window defocused - (35,44-49) - Fax problems - (33) - Dialtone isn't detected when Modio dial out to TNC Mertz modem using HyperTermDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.