Workstation for DOS ODI Client
------------------------------
Introduction:
-------------
This document describes the procedure to setup the NetWare DOS Requester
driver for PCI Ethernet Card.
Location of Driver: \DOS\PCIODI.COM
Sample Configuration Files:
---------------------------
STARTNET.BAT:
LSL
PCIODI
IPXODI
VLM
NET.CFG
LINK DRIVER PCIODI
FRAME ETHERNET_802.2
NETWARE DOS REQUESTER
FIRST NETWORK DRIVE = F
Setup Procedures for Novell NetWare DOS Requester ( VLM) :
-----------------------------------------------
The installation utility INSTALL.EXE is located on NetWare's
"Workstation for DOS" disk. Run INSTALL.EXE from the Workstation
for DOS Disk.
The NetWare Client Install program screen will appear. You must
complete each of the questions. These options are specific to your
needs.
1. Enter the destination directory for the NetWare Client.
(The default directory is C:\NWCLIENT.)
2. Gives you the option to automatically update the CONFIG.SYS
and the AUTOEXEC.BAT files or modify them at a later time manually.
3. Do you wish to install support for MS Windows ? (Y/N)
(MS Windows Subdirectory: default C:\WINDOWS)
4. Asks you to select a network driver and provide configuration
options. It uses the specifications you select to create the
file NET.CFG. Insert the PCI Ethernet Card drivers diskette when
prompted for the driver diskette and specify the driver path
A:\
5. Press <Enter> to install
NOTE:
-----
1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the
network mappings to work properly.
2. Installing Multiple LAN Adapters:
The keyword, EtherID, is provided for multiple LAN adapters in a
single system by PCIODI.COM. If EtherID unknown, you can ignore
it in the NET.CFG file and directly run PCIODI under the DOS
prompt,then your screen will display every adapter EtherID and
select which one you need.
-----------------------------------[ END ]-------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.