OEMSETUP.INF Driver File Contents (realport9x.exe)

[Identification]
    OptionType = NetService

[Options]
    XMOBILE

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType	= "service"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
XMOBILEDLL	= "%SystemRoot%\System32\xmobile.dll"
Manufacturer	= "Xircom"
ProductMajorVersion	= "1"
ProductMinorVersion	= "01"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName	= "XMobile"
ProductSoftwareImagePath = $(XMOBILEDLL)
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath	= $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status	       = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait

Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
    else
        set StartLabel = installadapter
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif

    StartWait
    ifstr(i) $(OldVersionExisted) == $(FALSE)
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
	endif

	set OEM_ABANDON_ON = TRUE

	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(ProductSoftwareName),+
	    $(ProductSoftwareDisplayName), +
	    $(STF_CONTEXTINFNAME), $(ProductSoftwareImagePath), "service", "",+
	    {"SNMP", "EventLog"}, "", $(XMOBILEDLL)

	Set SoftwareProductKey = $($R1)
	Set SoftwareNetRuleKey = $($R2)
	Set SoftwareServiceKey = $($R3)
	Set SoftwareParameterKey = $($R4)
	Set SoftLinkageKey	= $($R5)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	   Debug-Output "ShellCode error"
	   goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	   EndWait
	   Debug-Output "Registry error: add software components"
	   CloseRegKey $(SoftwareProductKey)
	   CloseRegKey $(SoftwareNetRuleKey)
	   CloseRegKey $(SoftwareServiceKey)
	   CloseRegKey $(SoftwareParameterKey)
	   CloseRegKey $(SoftLinkageKey)
	   CloseRegKey $(KeyParameters)
	   goto fatalregistry
	endif

        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell $(UtilityInf), AddValueList, $(SoftwareProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
	endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Resgitry error: add value list."
            CloseRegKey $(SoftwareProductKey)
            CloseRegKey $(SoftwareNetRuleKey)
            CloseRegKey $(SoftwareServiceKey)
            CloseRegKey $(SoftLinkageKey)
            CloseRegKey $(SoftwareParameterKey)
            goto fatalregistry
	endif

        set NewValueList = {{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftwareNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Resgitry error: add value list."
            CloseRegKey $(SoftwareProductKey)
            CloseRegKey $(SoftwareNetRuleKey)
            CloseRegKey $(SoftwareServiceKey)
            CloseRegKey $(SoftwareParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
	endif


	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\SNMP\Parameters\ExtensionAgents" $(MAXIMUM_ALLOWED) ExtensionAgentKey
	Shell $(UtilityInf) AddValueList, $(ExtensionAgentKey), +
	    {{"XMobile", $(NoTitle), $(!REG_VT_SZ), "SOFTWARE\Xircom\XMobile\CurrentVersion"}}
	CloseRegKey $(ExtensionAgentKey)

	OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Xircom\XMobile\CurrentVersion" $(MAXIMUM_ALLOWED) XircomKey
	Shell $(UtilityInf) AddValueList, $(XircomKey), +
	    {{"Pathname", $(NoTitle), $(!REG_VT_SZ), "%SystemRoot%\System32\xmobile.dll"}}

    endif
    EndWait

    ifint $(Result) == 0
        set CommonStatus = STATUS_REBOOT
    else-ifint $(Result) == 1
        set CommonStatus = STATUS_REBOOT
    else
        set RegistryErrorIndex = $(Result)
        goto fatalregistry
    endif

    Goto successful

configureadapter = +
    ifint $(Result) == 0
        set CommonStatus = STATUS_NO_EFFECT
    else-ifint $(Result) == 1
        set CommonStatus = STATUS_NO_EFFECT
    else
        set RegistryErrorIndex = $(Result)
        goto fatalregistry
    endif
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif

    OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\SNMP\Parameters\ExtensionAgents" $(MAXIMUM_ALLOWED) ExtensionAgentKey
    DeleteRegValue, $(ExtensionAgentKey), "XMobile"
    CloseRegKey $(ExtensionAgentKey)

    goto end

UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end

successful = +
    goto end

warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif

nonfatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    Ifint $(RegistryErrorIndex) == TCPIP_NONEXIST_ERROR
        set CommonStatus = STATUS_USERCANCEL
    endif
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[GetFilesSize]
    set FileSizeList = ^(Files-XMobile,3)
    set TotalSize = 0
    ForListDo $(FileSizeList)
        Split-String $($) "=" SplitString
        set Size = *($(SplitString),3)
        set-add TotalSize = $(TotalSize) $(Size)
    EndForListDo
    set-div SizeInK = $(TotalSize) 1024
    return $(SizeInK)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE	= "VERIFYSOURCEOLDER"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
;;;;;	AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   exit

[Source Media Descriptions]
     1 = "Xircom Setup Disk for NT"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1, OEMSETUP.INF, SIZE=13814, RENAME=$(!UG_Filename)

[Files-XMOBILE]
1, XMOBILE.DLL, SIZE=9728

[LanguagesSupported]
    ENG

[OptionsTextENG]
    XMOBILE	= "Xircom SNMP Mobile Extension Agent"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle	= "XMobile Setup"
ProductSoftwareDescription	= "Xircom SNMP Mobile Management Service"
ProductSoftwareDisplayName	= "Xircom Mobile SNMP Service"
ProductSoftwareTitle	= "Xircom SNMP Mobile Extension Agent"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText	= "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	    = "Cancel"

[FileDependentDlgENG]
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.25