[FONT] DEFAULT=Arial,11,ANSI [TITLE] RETRY=Error message of DP-CL22M Network Printer Port PASS=Password CONFIG=Port configuration for DP-CL22M Network Printer Port CONFSUB=Advanced setup VERSION=About ADDPORT=Wizard to add DP-CL22M Network Printer Port SEARCH=DP-CL22M Network Printer Search SERSUB=Search Configuration EDIT_BODY=Editing of mail text [LABEL] IDC_SETUMEI01=" Please select a network printing method.\n\n When printing on a local area network (LAN), LPR or Raw\n can be used.\n When printing over the Internet, IPP or E-mail can be used." IDC_SETUMEI011=" Please select a network printing method.\n\n When printing on a local area network (LAN), LPR or Raw\n can be used.\n When printing over the Internet, IPP can be used." IDC_SETUMEI02=Enter printer URL of the Network Printer. After entry, click "Next". IDC_SETUMEI03=A name can be assigned to the destination print port.\nPort names that already exist are not available. (Ex. LPT1)\nThe name below is used when you do not assign a name. IDC_SETUMEI04=Press "Finish" to register the DP-CL22M Network Printer with the settings listed below. IDC_SETUMEI05=Enter the IP address or a host name of the Network Printer and the port name of the Network Printer. IDC_SETUMEI06=Press "Finish" to register the DP-CL22M Network Printer with the settings listed below. IDC_SETUMEI07=Select the DP-CL22M Network Printer to register the port. When DP-CL22M Network Printer outside of the router is registered, Click "Configuration" to register a broadcast IP address and Click "Search". IDC_SETUMEI08=Assign a broadcast IP address of the network where DP-CL22M Network Printer is searched. IDC_SETUMEI10=Select the way your computer connects to the Internet. IDC_SETUMEI12=Please input the Server Name or IP Address and Account Name and E-mail Address. IDC_SETUMEI13=Please input the E-mail address(es) of the Printers.\nIt is possible to input up to 100 E-mail addresses. IDC_SETUMEI14=Select the E-mail format that will be sent to the printer. IDC_SETUMEI15=Press "Finish" to register the DP-CL22M Network Printer with the settings listed below. STC_EI_AUTH=If your Mail server requires Authentication before sending E-mail, please Enter an Account name and Password. STC_LA_INFO=Enter the IP address or a host name of the Network Printer. STC_FN_INFO=Press "Finish" to register the DP-CL22M Network Printer with the settings listed below. IDC_TEXT_NAME=&Destination print port name: IDC_TEXT_PROXY=&Address: IDC_TEXT_NUM=Port numb&er: IDC_TEXT_URI=Printer &URL: IDC_TEXT_CONNECT=Communicating with the Network Printer... IDC_TEXT_ADR=Printer URL: IDC_TEXT_PRINT=Destination print port name: IDC_TEXT_IP=IP address or &host name: IDC_TEXT_JCC=&Port name of the Network Printer: IDC_TEXT_IPADD=IP address or host name: IDC_TEXT_PNAME=Port name of the Network Printer: IDC_TEXT_PRINAME=Destination printer port name: IDC_TEXT_PRINTER=Printer: IDC_CNF_URI=Printer &URL: IDC_CNF_TIMEOUT=&Timeout value: IDC_CNF_SEC=Sec. IDC_CNF_PROXY=Add&ress: IDC_CNF_PORT=&Port number: IDC_CNF_USER=User &name: IDC_CNF_PASS=Pass&word : IDC_CNF_CHUNKSIZE=&Max Chunk size: IDC_CNF_BYTE=Byte IDC_LANG=&Language: IDC_TIMEOUT=Communication timeout [60 - 3600 seconds] IDC_VERSION01=Network Printer Port IDC_VERSION11=Network Printer Port IDC_VERSION02=Version 1.70 (1.70.00.03) ;IDC_VERSION02=Version 1.70 04/03/31 IDC_VERSION03=(C) Panasonic Communications Co., Ltd. 2001-2005 IDC_VERSION04=(C) silex technology, Inc. 1998-2005 IDC_NAME=&User name: IDC_KEYWORD=&Password: IDC_SETUMEI11=To print, you must enter a user name and a password. IDS_BIDI_ERROR=Bi-directional communication is enabled in the configuration of the printer driver being used. Select "Disable bi-directional support for this printer" in Spool Settings of the properties of the printer because printing might fail when DP-CL22M Network Printer Port is used.\nDo you want to continue to print? IDC_STC_SUBJECT=&Subject: IDC_STC_BODY=&Text: IDC_STC_SIGNATURE=Si&gnature: IDC_STC_SMTP=&SMTP Server: IDC_STC_FROM=Na&me: IDC_STC_MAIL=Ma&il address: IDC_STC_TO=Add&ress: IDC_STC_ESMTP=SMTP Server: IDC_STC_ENAME=Name: IDC_STC_EFROM=Mail address: IDC_STC_ETO=Address: IDC_STC_EBODY=Printing the text: IDC_STC_DIVIDE=D&ivision Unit: IDC_STC_KB=KB IDC_STC_ENCODE=E&ncoding: BODY_PRINT=It does BODY_NOPRINT=It does not do STC_ID=A&ccount name: STC_PASSWORD=&Password: [TAB] PAGE1=Transport PAGE2=Authentication PAGE3=General PAGE4=Transmission PAGE5=Mail compilation PAGE6=Authentication [LIST] ITEM0=IP Address ITEM1=MAC Address ITEM2=Model Name [COMBO] LANG0=English (U.K.) LANG1=English (U.S.) LANG2=French LANG3=German LANG4=Japanese DEFAULT=en-us [BUTTON] IDC_RETRY=&Retry IDOK=OK IDCANCEL=Cancel IDYES=&Yes IDAPPLY=&Apply IDNO=&No IDC_CHK_PROXY=Connect via &proxy server IDC_BTN_VERSION=A&bout... IDC_BTN_HIGH=A&dvanced... IDC_CHK_BASIC=U&ser authentication IDC_CHK_CHUNK=Use &Chunked Encoding IDC_BTN_VER=&About... IDC_NEXT=&Next > IDC_BACK=< &Back FINISH=&Finish IDC_JCLPR=Print using &LPR (Line Printer Remote) IDC_JCIPP=Print using &IPP (Internet Printing Protocol) IDC_JCRAW=Print using &Raw (TCP/IP 9100) IDC_JCEMAIL=Print using &E-mail IDC_CHK_MAIL=The E-mail message is &printed IDC_RAD_VARIABLE=The E-mail message is &included when printing. IDC_RAD_FIXATION=&Customize the E-mail message that will be included, when printing. IDC_BTN_EDIT=&Edit... IDC_BTN_HISTORY=C&lear IDC_CHK_DIVIDE=Di&viding the mail, it transmits IDC_BTN_MODEM=Connect using a &modem and telephone line IDC_BTN_LAN=Connect using a &local area network IDC_BTN_NO=Do n&ot print using a proxy server IDC_BTN_PROXY=Print usin&g a proxy server IDC_BTN_SEEK=&Search... IDC_BTN_CON=&Configuration... IDC_BTN_BROAD=&Search IDC_BTN_ADD=A&dd IDC_BTN_DEL=D&elete IDC_BTN_OLD=&Set to include former DP-CL22M Network Printers for searching IDC_CHK_BIDI=&Do not display the message from next time CHK_AUTH=Use SMTP Aut&hentication CHK_RECONNECT=Enable Automatic Connection &retryDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.