1. cl22mwf.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (cl22mwf.exe)

================================================================================

                  Panasonic Color Laser Printer DP-CL22M
                       Windows Firewall Setting Tool 

================================================================================

Support OS:
*  Microsoft(R) Windows(R) XP operating system (Service Pack 2)
   (hereafter Windows XP)
*  Microsoft(R) Windows Server(TM) 2003 operating system (Service Pack 1)
   (hereafter Windows Server 2003)

If the Windows Firewall is enabled, following problems occur.

[Device Monitor]
 * Device Monitor does not notify a printer error even if 
   the "Popup when error occurs" is enabled.

 * The "Print Notification" is not displayed even if 
   the "Enable Remote Print Notification" is enabled.

[HDD Utility]
 * Spooled jobs are not displayed in the HDD Spooler window.

However above problems will be solved by Windows Firewall Setting Tool, 
if you set the permission to Windows Firewall with our Windows Firewall Setting 
Tool according to the following procedure.

NOTE :
This tool enables to add or remove both of the above utilities 
at the same time in the exceptions list of Windows Firewall, 
but each utility cannot be added or removed respectively.

************************************************************************
* Add to the exceptions list.
************************************************************************

NOTE :
The network security in Windows Firewall is changed by using this tool. 
Therefore, consult with your network administrator about the change of 
the network security before adding to the exceptions list.

1. Double Click "SetupWF.exe".(e.g.: C:\CL22M\SetupWF\SetupWF.exe)
2. Select the "Add to the exceptions list" button.
3. Click the "OK" button.
4. Click the "OK" button.
5. Restart your computer.

Device Monitor and HDD Utility will work properly.
To confirm the changed security settings, perform the following steps.

1. Click "Start", 
   For Windows XP :
       select "Control Panel", and then click "Security Center".
   For Windows Server 2003 :
       select "Control Panel".
2. Click "Windows Firewall".
3. Click the "Exceptions" tab.
4. Confirm the "Panasonic Trap Monitor Service" is added and checked in 
   the "Programs and Services:" list.

NOTE :
If you want to block the above utility, 
remove from the exceptions list according to the following procedure.

************************************************************************
* Remove from the exceptions list.
************************************************************************

1. Double click "SetupWF.exe".(e.g.: C:\CL22M\SetupWF\SetupWF.exe)
2. Select the "Remove from the exceptions list" button.
3. Click the "OK" button.
4. Click the "OK" button.
5. Restart your computer.

Device Monitor and HDD Utility will not work properly by blocking of 
Windows Firewall. 
To confirm the changed security settings, perform the following steps.

1. Click "Start", 
   For Windows XP :
       select "Control Panel", and then click "Security Center".
   For Windows Server 2003 :
       select "Control Panel".
2. Click "Windows Firewall".
3. Click the "Exceptions" tab.
4. Confirm the "Panasonic Trap Monitor Service" is removed from  
   the "Programs and Services:" list.

--------------------------------------------------------------------------------

  Microsoft, Windows and Windows Server are either registered trademarks 
  or trademarks of Microsoft Corporation in the United States and/or 
  other countries.

  All other acknowledgements are trademarks or registered trademarks of 
  their respective holders.

  (C) Panasonic Communications Co., Ltd. 2005

--------------------------------------------------------------------------------

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.