******************************************************************************
About Display Information File
******************************************************************************
The Display Information File includes the information of your display.
When your display does not support Plug & Play function, this file enables
setting suitable resolution and refresh rate for your display.
* About Plug & Play
When your computer and display support VESA DDC, the suitable resolution
and the refresh rate are set by just plugging your display into the
computer without any manual settings.
When your computer system supports Plug & Play, the Display Information
File is not required except for installing the Color Profile.
(System requirement for Plug & Play)
OS (Operating System) supporting VESA DDC
Microsoft Windows 2000 (Windows 2000)
Microsoft Windows XP (Windows XP)
Computer (Graphics Board) supporting VESA DDC
Display Cable supporting VESA DDC
* Please contact each manufacture (computer, OS, graphics board)
to find if your system supports VESA DDC.
* The following procedure may differ depending on your computer
(graphics board).
* About VESA DDC
Plug & Play standard for the display settled by VESA (Video Electronics
Standards Association)
============================================================================
1) For using on Windows 2000
============================================================================
* For the system supporting VESA DDC
If your system supports VESA DDC, the display is automatically recognized
and suitable resolution and refresh rate are selected.
There is no need to install the Display Information File except for using
the Color Profile.
Settings
(1) Connect the Display with the Computer and start Windows 2000.
Confirmation
(1) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Monitor" tab and confirm "Plug and Play Monitor" is displayed
in the "Monitor Type".
* For the system not supporting VESA DDC
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Monitor" tab and click "Properties".
(6) Select "Driver" tab and click "Update Driver...".
(7) "Upgrade Device Driver Wizard" window is displayed and click "Next".
(8) Select "Display a list of the known drivers for this device so that
I can choose a specific driver" and click "Next".
(9) Click "Have Disk...".
(10) "Install From Disk" window is displayed and select a floppy disk drive
in the "Copy manufacturer's files from:" section. Click "OK".
(11) Select a suitable display name from the "Models:" then click "Next".
(12) "The wizard is ready to install the driver for the following hardware
device:" is displayed and confirm that your selected display name
is displayed. Click "Next".
(13) "Completing the Upgrade Device Driver Wizard" is displayed and
click "Finish".
============================================================================
2) For using on Windows XP
============================================================================
* For the system supporting VESA DDC
If your system supports VESA DDC, the display is automatically recognized
and suitable resolution and refresh rate are selected.
There is no need to install the Display Information File except for using
the Color Profile.
Settings
(1) Connect the Display with the Computer and start Windows XP.
Confirmation
(1) Click "Start" and select "Control Panel".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Monitor" tab and confirm "Plug and Play Monitor" is displayed
in the "Monitor Type".
* For the system not supporting VESA DDC
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Monitor" tab and click "Properties".
(6) Select "Driver" tab and click "Update Driver...".
(7) "Hardware Update Wizard" window is displayed and select "Install from
a list or specific location (Advanced)". Click "Next".
(8) Select "Don't search. I will choose the driver to install" and click "Next".
(9) Click "Have Disk...".
(10) "Install From Disk" window is displayed and select a floppy disk drive
in the "Copy manufacturer's files from:" section. Click "OK".
(11) Select a suitable display name from the "Model" then click "Next".
(12) "Completing the Upgrade Device Driver Wizard" is displayed and
click "Finish".
******************************************************************************
About Color Profile
******************************************************************************
Color Profile (ICC Profile) includes all the necessary color information
for the display.
This file is used for color management with the application software
which support ICC function.
* What is the ICC Profile?
A specific file including the color characteristic information for the
device, settled by ICC (International Color Consortium).
* Settings
The Color Profile is not automatically installed on Windows 2000 and
Windows XP. Please install the profile following the instruction of below.
When installing the Display Information File with above procedure,
the Color Profile is automatically installed. In this case, the following
profile will be set as a default profile;
============================================================================
For using on Windows 2000
============================================================================
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Color Management" tab and click "Add...".
(6) "Add Profile Association" window is displayed and select a floppy disk
drive in the "Look in:" section.
(7) Select a suitable Color Profile from the list then click "Add".
(8) Select a Color Profile from the list in the "Color Profiles currently
associated with this device:" and click "Set As Default".
(9) Click "Apply" and click "OK" to close a menu.
============================================================================
For using on Windows XP
============================================================================
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tab and click "Advanced...".
(5) Select "Color Management" tab and click "Add...".
(6) "Add Profile Association" window is displayed and select a floppy disk
drive in the "Look in:" section.
(7) Select a suitable Color Profile from the list then click "Add".
(8) Select a Color Profile from the list in the "Color profiles currently
associated with this device:" and click "Set As Default".
(9) Click "Apply" and click "OK" to close a menu.
------------------------------------------------------------------------------
Copyright (C) 2002-2003 EIZO NANAO CORPORATION All rights reserved.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.