1. NE2000P.exe Driver
2. WINNT.TXT File Contents

WINNT.TXT Driver File Contents (NE2000P.exe)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³              Installation for Windows NT 3.1, 3.5, 3.51                ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

  Function:

     1. W940ND.SYS is a NDIS 3.x driver for Windows NT Platform.
        If there exists only one 940 card, the driver will automatically get
        IOBASE and IRQ from PCI Configuration Space.
        If there exists more than one 940 cards, user can indicate a
        specified 940 card by inputing IDs.

     2. OEMSETUP.INF is a Network Setup Information File for Windows NT
        Platform.


  Installation:

      1. Insert the driver disk into drive A: or B:

      2. From the Windows NT Main Menu, select the Control Panel icon.

      3. From the Control Panel menu select the Network icon.

      4. In Network Setting, click on "Add Adapter".

      5. For each additional message, select continue.

      6. From the Add Network Adapter dialog box, scroll through the menu to
         select Other.

      7. When the Insert Diskettes menu prompts you for a disk, enter the
         drive A: or B: with path \WINNT\<Windows NT version>,
         for exmaple :

             a. For Windows NT 3.1, the path is

                    <drive:>\WINNT\31

             b. For Windows NT 3.51, the path is

                    <drive:>\WINNT\351

         Then select OK.

      8. Select 'Winbond 940 PCI Adapter' from the Select OEM Option box,
         then select OK.

      9. Upon completion, the selected adapter is added to the
         Installed Adapter Cards list of the Network Setting box
         (the number prefixing the adapter is the adapter number).

      10. Click on [Close] to complete the Network Setting
          initialization.

      11. Shutdown and reboot the system.


  Usage:
     1. Boot your computer
     2. if you want to select another 940 card
          step1: Double-click the 'Control Panel' icon in the 'Main' Program
                 Group.
          step2: Double-click the 'Network' icon from the 'Control Panel'
                 Window.
          step3: Select the 'Winbond 940 PCI Adapter' item in the 'Installed
                 Adapter Cards' Window, and double-click the 'Configure'
                 Button.
          step4: Type Ehternet IDs you want to select when the 'Input Ethernet
                 ID' Dialog Box appears, and click the 'OK' Button when you
                 finish.
          step5: Click the 'OK' Button in the 'Network Settings' Dialog Box.
          step6: Restart your system.


  Trouble Shooting

     1. Message: 'At least one service or driver failed during system startup.
                  Use Event Viewer to examine the event log for details.'
        Solution: Make sure
                  a. your 940 card is plugged into your system, or
                  b. if there exists more than one 940 cards, you must
                     indicate a specified 940 card by inputing IDs.
     2. Condition: The Windows NT 3.5 can not boot normally,
        Solution: Make sure that your W89C940 PCI card is connected to the
                  cable.