Support Publishing \PKTDRV\PDIPX.TXT
Ether SN2000 Ethernet Adapter Packet Driver Installation
for IPX SHELL
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
There are two methods for running the IPX SHELL program. They are
described below.
METHOD 1:
ÄÄÄÄÄÄÄÄ
If the SN2000.SYS program is used, the following statement must be
included in your CONFIG.SYS file:
DEVICE = SN2000.SYS [/option] <packet_int_no>
<packet_int_no> is the software interrupt vector number used
by the packet driver program. This can be from
96 to 128.
/d Delay Initial - The driver program will not
initialize the network interface card
until the packet driver program is
accessed by its upper layer program.
/w The /w parameter is for use only in the Windows
environment.
See \PKTDRV\README.TXT for addition parameters
You can place this line anywhere in the CONFIG.SYS file.
Modify the content of AUTOEXEC.BAT to add DPDIPX statement:
>DPDIPX
>NETX
><change to last driver>
>LOGIN <username>
METHOD 2:
ÄÄÄÄÄÄÄÄÄ
If the SN2000.COM program is used, follow these steps:
Execute SN2000.COM by typing:
>SN2000 [/option] <packet_int_no>
>DPDIPX
>NETX
><change to last driver>
>LOGIN <username>
<packet_int_no> is the software interrupt vector number used by the
packet driver program. This can be from 96 to 128.
/d Delay Initial - The driver program will not initialize
the network interface card until the packet driver
program is accessed by its upper layer program.
/w The -w parameter is for use only in the Windows
environment.
See \PKTDRV\README.TXT for addition parameters
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.