route1.inf Driver File Contents (it031197.zip)

;-------------------------------------------------------------------------
;  Windows 95/NT 4.0  ISDN Terminal Adapter Setup File
;-------------------------------------------------------------------------
;  Model: Route1
;  Revision: 2.2 - tem
;  Date: 03/16/97 @ 22:59
;-------------------------------------------------------------------------

[Version]
Signature="$CHICAGO$"
Class="Modem"
Provider=%Mfg%
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}

[Manufacturer]
%Mfg% = ICI

[ICI]
%Modem1% = Modem1, UNIMODEM               ; ICI Route 1 @ 115.2Kbps - D1
%Modem2% = Modem2, UNIMODEM               ; ICI Route 1 @ 57.6Kbps  - D2
 
[Modem1]
AddReg=Modem1.AddReg, All, MfgAddReg

[Modem2]
AddReg=Modem2.AddReg, All, MfgAddReg

[Modem1.AddReg]
HKR,, Properties, 1, 00,00,00,00, 3C,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 13,00,00,00, 00,C2,01,00, 00,F4,01,00
HKR,, DCB, 1, 1C,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

[Modem2.AddReg]
HKR,, Properties, 1, 00,00,00,00, 3C,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 13,00,00,00, 00,E1,00,00, 00,FA,00,00

[Strings]
ClassName = "Modem"
Mfg = "Interack Communications, Inc." 
Modem1="ICI Route 1 @ 115.2Kbps - D1 default"
Modem2="ICI Route 1 @ 57.6Kbps  - D2 default"

[All]
HKR,, DeviceType, 1, 01
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "<cr>TS<cr>"

[MfgAddReg]
HKR, Monitor,   1,, "None"
HKR, Monitor,   2,, "None"
HKR, Hangup,    1,,
HKR, Answer,    1,, "<h01>"
HKR,, Reset,,   "TS<cr>"
HKR, Settings,  Prefix  ,, 
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "TD"
HKR, Responses, "<cr><cr><lf>>",			1, 00, 00, 00,00,00,00, 00,00,00,00	; OK
HKR, Responses, "<cr><lf>Ready<cr><lf>>",		1, 00, 00, 00,00,00,00, 00,00,00,00	; OK
HKR, Responses, "<cr><lf>Connect  56<cr><lf>",		1, 02, 00, C0,DA,00,00, 00,00,00,00	; 
HKR, Responses, "<cr><lf>Connect  64<cr><lf>",		1, 02, 00, 00,FA,00,00, 00,00,00,00	; 
HKR, Responses, "<cr><lf>Connect 112<cr><lf>",		1, 02, 00, 80,5B,01,00, 00,00,00,00	; 
HKR, Responses, "<cr><lf>Connect 128<cr><lf>",		1, 02, 00, 00,F4,01,00, 00,00,00,00	; 
HKR, Responses, "<cr><lf>Invalid<cr><lf>>",		1, 03, 00, 00,00,00,00, 00,00,00,00 	; ERROR - Unrecognized command
HKR, Responses, "<cr><lf>Remote disconnect<cr><lf>>",	1, 04, 00, 00,00,00,00, 00,00,00,00 	; Carrier Signal lost, or not detected
HKR, Responses, "<cr><lf>Not Ready<cr><lf>>",		1, 05, 00, 00,00,00,00, 00,00,00,00 	; ISDN Interface not synchronized

; =========================================================================================
; The following two responses are interpreted as Busy by the Dialer, causing a redial loop.
; However, if one checks the "Details", an indication of No Dialtone is given
; -----------------------------------------------------------------------------------------
HKR, Responses, "<cr><lf>Voice in use<cr><lf>>",	1, 05, 00, 00,00,00,00, 00,00,00,00 	; Selected line in use
HKR, Responses, "<cr><lf>No service available<cr><lf>>",		1, 05, 00, 00,00,00,00, 00,00,00,00 	; Switch did not acknowledge SETUP
; -----------------------------------------------------------------------------------------

HKR, Responses, "<cr><lf>Busy<cr><lf>>",		1, 06, 00, 00,00,00,00, 00,00,00,00 	; BUSY - Called number is BUSY
HKR, Responses, "<cr><lf>Incoming",			1, 08, 00, 00,00,00,00, 00,00,00,00 	; RING - Ring signal indicator
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.32