Installing NetSurf PCMCIA 16bit Fast Ethernet Adapter for WFW 3.1x ==================================================================== Installation Procedures This driver diskette includes an OEMSETUP.INF file for Windows for Workgroups. Using the OEMSETUP.INF file , the user can select whichever NetSurf PCMCIA 16bit Fast Ethernet Adapter are to be installed based on Windows dialog menus. The OEMSETUP.INF file contains selections for NetSurf PCMCIA 16bit Fast Ethernet Adapter. 1. Proceed to install Windows for Workgroups. If you already have an installed Windows for Workgroups , open the Control Panel Window to change the network settings. 2. When Windows asks for the type of network adapter , it will show a list of all network adapters supported by Windows. You must select [ Unlisted or Updated Network Adapter ]. 3. Windows will ask for an OEMSETUP.INF file. Since the OEMSETUP.INF file is included in the driver disk, insert the diskette in drive A: Input the full path where the OEMSETUP.INF file is located. ( i.e. A:\WFW311 ) 4. You will see a Windows dialog menu listing all network adapters included in the OEMSETUP.INF file. Select the network adapter that you will be using. 5. Select [NetSurf PCMCIA 16bit Fast Ethernet Adapter] and press <Enter>. 6. You need to specify IRQ and I/O settings, which must be equal to the /irq and /iop parameters specified to the Card Enabler program. 7. Windows will copy the NDIS driver file and update the Windows network system automatically. At this point , you can finish the installation or continue the process according to your preferences. After WFW finishes the setup for the driver, it will modify your CONFIG.SYS, AUTOEXEC.BAT, and PROTOCOL.INI files. ------------------------------ End of File -------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.