NETMXCB.INF Driver File Contents (GPM2032.ZIP)

[Version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Net
provider=%V_MS%

[Manufacturer]
%V_MXIC%=MXIC

[MXIC]
%0532ML.DeviceDesc%=0532ML.ndi, MXIC-MXNDIS         ;Manual Load

;*******************************************************
;[MXIC adapter]
;*******************************************************

[0532ML.ndi]
AddReg=0532ML.ndi.reg,fastmac.ndi.reg,fastmac.pci.reg,fastmac.con.reg
LogConfig=0532ML.LogConfig


;*******************************************************
;[MXIC adapter]
;*******************************************************

[0532ML.ndi.reg]
HKR,Ndi,DeviceID,,"MXIC-MXNDIS"
HKR,Ndi,CardType,,"LEGACY"
HKR,,AdapterCFID,,053210d9
HKR,,DirectEnable,,1


;*********************************************************
; Device specific parameters
;*********************************************************

[fastmac.con.reg]
;ConnectionType
HKR,Ndi\params\ConnectionType,ParamDesc,,"Connection Type"
HKR,Ndi\params\ConnectionType,default,,0
HKR,Ndi\params\ConnectionType,type,,enum
HKR,Ndi\params\ConnectionType\enum,0,,"Speed AutoDetect"
HKR,Ndi\params\ConnectionType\enum,1,,"100Mb Full-Duplex"
HKR,Ndi\params\ConnectionType\enum,2,,"100Mb Half-Duplex"
HKR,Ndi\params\ConnectionType\enum,3,,"10Mb  Full-Duplex"
HKR,Ndi\params\ConnectionType\enum,4,,"10Mb  Half-Duplex"
HKR,NDI\params\ConnectionType,flag,1,20,00,00,00

;*******************************************************
; Driver common base parameters
;*******************************************************

; Interfaces
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"

;params
;;;;;; HKR,,MediaType,,1
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,,MemoryMappedBaseAddress,1,01,00,00,00

[0532ML.LogConfig]
ConfigPriority=HARDRECONFIG
IOConfig=100@d000-f7ff%FF80(3FF::)
IRQConfig=3,4,5,6,7,8,9,10,11,12,13,14,15
MemConfig=4000@C0000-EFFFF%FFFFC000

;*******************************************************
; PCI common parameters
;*******************************************************
[fastmac.pci.reg]
;params
HKR,,AdapterType,,5
HKR,,BusType,,5

;*******************************************************
;[MXIC adapter]
;*******************************************************
[fastmac.ndi.reg]
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,mxcb.sys
; NDIS Info
HKR,NDIS,LogDriverName,,"mxcb"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Install sections
HKR,Ndi\Install,ndis3,,"MXCB.ndis3"


;*******************************************************
;[MXIC adapter]
;*******************************************************
[MXCB.ndis3]
CopyFiles=netmxcb.inf.CopyFiles,MXCB.ndis3.CopyFiles
[MXCB.ndis3.CopyFiles]
mxcb.sys
[netmxcb.inf.CopyFiles]
netmxcb.inf


[DestinationDirs]
DefaultDestDir             =11 ; LDID_SYS
MXCB.ndis3.CopyFiles  =11
netmxcb.inf.CopyFiles  =17

[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_MXIC="MXIC"

;Devices
0532ML.DeviceDesc=  "32-bit card bus 10/100 Mbps Fast Ethernet PC Card"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.22