1. bask200.exe Driver
2. ERRATA.TXT File Contents

ERRATA.TXT Driver File Contents (bask200.exe)

SmartLink Modio Version 2.00.07 - October 9, 1998
====================================================

The V.90 implemented in this version is not yet fully performance optimized.

SCR #613 - When connected to a V.90 ISP, playing Mpeg or Mp3 files can lead to retrain and move to v.34, or to uncontinuous playing on platforms less strong or equal to Pentium 200 Mhz.


SmartLink Modio Version 1.90.01 - September 14, 1998
====================================================
- SCR #591 - Playing MP3 files while connected at 56KFlex on some platforms, more likely on Pentium 
  166Mhz, could be partially broken if the sampling rate is 44Khz and other applications loads the CPU.  


SmartLink Modio Version 1.52 - APRIL 22, 1998
=============================================
- Graceful Degradation not yet supported
- Connection problems on some PBX 
- MS Phone:  Screen call feature isn’t working
- In order that Modio will be able to automatically detect DATA call in BitWare appl,
  the caller has to append ,,,,,D to the end of the phone number.
  (You might have to adjust the number of the commas).
- SCR #303 - Fax receive with RingZero causes loud buzz at the otherside

- Users should be aware of the following problems with specific Intel motherboards:
  "LongTree" and "Encourage" motherboards have problem with interrupt 9 allocated for
  PnP devices.
  The system allocates int 9 for the device, but the interrupt never arrives.
  Int 9 on these board worked with PCI devices and maybe with legacy ISA non 
  PnP devices.
  If after Modio installation the Modio doesn't function correctly, check if IRQ9
  is allocated to the Modio and change to another available IRQ if needed.

- When Modem Connection is established in DOS games, sound is disabled