1. aln32531.exe Driver
2. WIN98.TXT File Contents

WIN98.TXT Driver File Contents (aln32531.exe)

****************************************************************************
*                     NDIS5 Driver for Windows 98                          *
*                              Dec. 1998                                   *
****************************************************************************
Introduction:
=============
 This document shows you how to setup the driver and how to use the enhanced
 functions by setting the custom keywords.

  Location of Driver:     \W98&2000\ALN325.SYS

Contents of the Subdirectory:
=============================
    ALN325.SYS          The NDIS5 driver for Windows 98.
    ALN325.INF          The installation information file.

Installation:
=============
  Before starting with the installation process, make sure that the adapter
  is properly installed and configured.

  1.When you plug the ALN-325 in the mother board and power on the
    Windows 98,the 'Add New Hardware Wizard' window will prompt and says
    that

    The wizard search for new driver for:
         PCI Ethernet Controller
  2.In the 'Add New Hardware Wizard' window,click 'Next' then it will ask
    you 'What do you want Windows to do?'.Choose the item that

    Display a list of all the drivers in a specific
    location,so you can select the driver you want.

    Click 'Next'.
  3.And select 'Network Adapters' for the type of the device,then click
    'Next'.It will prompt a 'Select device' window.
  4.Click 'Have Disk' button.
    In the 'Install From Disk' window,put the driver disk in the floppy
    drive and enter the driver path i.e. 'a:\W98&2000' in combo list and click
    'OK'.It will show 'AcerLAN ALN-325 10/100 Base-TX Fast Ethernet adapter'
    in the Models field of 'Select Device' window.Click 'OK'.
  5.There will show 'A:\W98&2000\ALN325.INF' in the Location of driver field
    for the device 'AcerlAN ALN-325 10/100 Base-TX Fast Ethernet Adapter' in
    the 'Add New Hardware Wizard' window.Click 'Next'.
  6.Specify the path of the driver files i.e a:\W98&2000,then the Windows will
    copy the necessary files for the driver and system files.Click 'Finish'.
  7.Select the appropriate Connection Type (default is Auto-Negotitation).
    Click 'OK'.
  8.If this is your first time to install the Ethernet adapter and have not
    install the protocols and clients for Microsoft and Netware,please do
    NOT restart the computer.Go to the Start\Settings\Control and
    double-click the Network icon to install the other necessary files for
    the network operation.
    Windows 98 will ask you Do you want to restart your computer now?,
    Click 'Yes' to restart the Windows 98.