Protocol.ini ************ [protman] drivername = protman$ dynamic = yes priority = netbeui [netbeui_xif] drivername = netbeui$ bindings = EL90X_nif names = 6 ncbs = 12 ; packets = 20 ; pipeline = 10 ; sessions = 6 ; stacksize = 512 ; lanabase = 0 [xnsnb_xif] drivername = xnsnb$ bindings = EL90X_nif load = xnsnb[cbr] lanabase = 1 [xnstp_xif] drivername = xnstp$ bindings = EL90X_nif load = xnstp[ub] lanabase = 1 [tcpip_xif] drivername = TCPIP$ disabledhcp = (TCPIP_NO_DHCP) ipaddress0 = (TCPIP_ADDRESS) subnetmask0 = (TCPIP_SUBMASK) defaultgateway0 = (TCPIP_GATEWAY) tcpsegmentsize = 1450 tcpwindowsize = 1450 nbsessions = 6 load = tcptsr[c],tinyrfc[c],emsbfr[cr] unload = "unloadt /notsr[dc]" bindings = EL90X_nif lanabase = 1 [ipx_xif] drivername = ipx$ load = ipxmark[u],ipx[u] unload = ipxrel[c] bindings = EL90X_nif lanabase = 1 [msdlc_xif] drivername = msdlc$ bindings = EL90x_nif load = msdlc[ub] unload = msdlc[u] [EL90x_nif] drivername = EL90x$ ; busmaster=yes ; bus=PCI ; maxtransmits=50 ; ioaddress = 0x300 Dosbb.cnf ********* ; DOS on 3Com Fast Etherlink PCI BASE D0H RPL BBLOCK\RPLBOOT.SYS LDR BBLOCK\RPLSTART.COM ~ DAT BBLOCK\NETBEUI\EL90X\PROTOCOL.INI DRV BBLOCK\RPLDISK.SYS ~ ~ ~ EXE BBLOCK\RPLPRO1.COM ~ 2 ~ EXE BBLOCK\I13.COM ~ ~ ~ EXE BBLOCK\RPLBIND2.EXE ~ ~ EXE BBLOCK\PROTMAN.EXE ~ ~ EXE BBLOCK\RPLBIND1.EXE ~ ~ ;DRV BBLOCK\IPXNDIS.DOS ~ ~ ~ DRV BBLOCK\TCPDRV.DOS /I:C:\LANMAN.DOS ~ ~ EXE BBLOCK\NETBEUI\NETBEUI.EXE ~ 15 ~ DRV BBLOCK\NDIS\EL90X.DOS ~ 40 ~ DRV BBLOCK\PROTMAN.DOS /I:C:\LANMAN.DOS ~ M Bootblock ********* BootName=DOS_EL90X BootComment=DOS 3COM ETHERLINK PCI 3C90X Acknowledgment of the last RemoteBoot frame is requested. VendorName=00A024 BbcFile=BBLOCK\NETBEUI\EL90X\DOSBB.CNF WindowSize=0x0 Bootblock Configuration *********************** ConfigName=DOS622_EL90X ConfigComment=DOS 3COM ETHERLINK PCI 3C90X Configuration is enabled. BootName=DOS_EL90X DirName=DOS DirName2=DOS622 DirName3=(null) DirName4=(null) FitShared=FITS\DOS622.FIT FitPersonal=FITS\DOS622P.FITDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.