==================================== Adaptec EZ-SCSI 4.02 Upgrade Program ==================================== Welcome to the Adaptec EZ-SCSI Upgrade program. This DOS-based program will upgrade the following drivers, from Adaptec EZ-SCSI 3.0 and higher, to the latest version of Adaptec EZ-SCSI: Adaptec ASPI Managers for DOS Adaptec ASPI for Windows (Windows 3.1/3.11) Adaptec 32-Bit Disk Access (Windows 3.1/3.11) NOTE: Users of Adaptec EZ-SCSI 3.x, and earlier, can upgrade to the full version of Adaptec EZ-SCSI 4.0 by calling one of the following numbers: Software Ordering (U.S.A. and Cananda) (800) 442-7274 M-F: 6:00am to 5:00pm Pacific Standard Time International Software Ordering (408) 957-7274 M-F: 6:00am to 5:00pm Pacific Standard Time Software Ordering (Germany) 0130 828022 M-F: 9:00 to 18:00 Software Ordering (France) 05 90 77 04 M-F: 9:00 to 18:00 Software Ordering (United Kingdom) 0800 966526 M-F: 9:00 to 18:00 Software Ordering (Europe, other) +32 11 300 379 M-F: 9:00 to 18:00 ================================= 1. How to run the Upgrade Program ================================= After decompressing the files onto your hard, you can start the upgrade program by running UPDATE.EXE. This upgrade program will ask you for your current operating system type (i.e. Windows 95/Windows NT, Windows 3.1/3.11, or DOS only). After verifying the location of EZ-SCSI, the upgrade program will automatically upgrade your Adaptec EZ-SCSI drivers. ======================== 2. Troubleshooting Tips ======================== Listed below are some of the possible errors you may encounter if one the followings does occur: () Adaptec EZ-SCSI is not already installed on your system. () The upgrade program cannot verify your EZ-SCSI directory location. () The accompanying files are missing or not in the same directory as the executable file. Error Message Explanation ============= ============================================ WARNING: We are unable to The upgrade program read in the location verify your EZ-SCSI location. you entered for your previous EZ-SCSI Please verify this location directory location. However, it was unable and try again. to find it on your system. Double check the location of your EZ-SCSI installation and try again. WARNING: We are unable to The upgrade program read in the location verify your Windows location. you entered for your Windows directory Please verify this location location. However, it was unable to find and try again. it on your system. Double check the location of your Windows installation and try again. Error occurred during upgrade While the upgrade program was attempting to process. update your files an error occurred which halted the program. This could happen if the accompanying patch file, DOSWINUP.RTP, is not in the same directory as UPDATE.EXE. Make sure the two files are in the same location and re-run UPDATE.EXE. Another possible reason for this message is if the file, PATCH.EXE, is not in the same location as UPDATE.EXE. Copy the file PATCH.EXE into the same location as UPDATE.EXE and re-run the program.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.