This is the 7169 revision of the firmware for the Motorola M1200 modem found in the Micron XKE notebook. The 7169 firmware is the 33.6Kbps revision. Execute SETUP.EXE to install it. This will force the older firmware into the modem, resulting in a flash back from 56Kbps, to 33.6Kbps. To use this utility, your modem must be set to use resources: COM2 IRQ3. This can be accomplished in CMOS setup (BIOS). The files MUST be extracted onto a floppy disk (A:\) and run from there. If you have any questions about this utility, please feel free to contact Micron Electronics Technical Support at 1-888-349-6972 or by e-mail at transport@micronpc.com. NOTE: If you are using a Motorola StarTac cellular phone, you cannot use the 7169 revision of the firmware. Special needs were met with the 8020 firmware to support the StarTac cellular phone, and flashing to 7169 will keep those functions from working.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.