============================================ MSI CD/DVD/CDRW/COMBO BIOS Update Procedure ============================================ 1. Create a bootable floppy disk that be able to boot to DOS console capable of executing normal MS-DOS batch and executable files in accordance with the instructions. 2. Download and unzip the xxxx.zip file corresponding to your model from the MSI website to the Bootable floppy. 3. Boot from your DOS floppy disk to the Real DOS mode. 4. At the command prompt. +-------------------------------------------------------+ |Type "MSIFLASH <Port> w <Firmware>". | +-------------------------------------------------------+ |Usage: MSIFLASH <Port> w <filename.xxx> | |Port: 1-Primary IDE master 2-Primary IDE Slave | | 3-Secondary IDE master 4-Secondary IDE Slave | | w:Write flash | +-------------------------------------------------------+ 5. Reboot the system,when finish updating process. Note: You should not update your firmware unless you have have flash experience with your optical drive.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.