;**************************************************************************** ; OEMSETUP.INF ;**************************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA MCA PCI [Options] em556n4 [OptionsTextENG] em556n4 = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)" [AllFileConstants] GenericInfVersion = " V1.50" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "3Com" [FileConstants-em556n4] GenericAdapterName = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)" GenericDriverName = "3Com Megahertz LAN + 56K Modem Driver (Ethernet)" GenericSysName = "em556n4.sys" ; Product Info ProductMajorVersion = "1" ProductMinorVersion = "10" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ; Software ProductSoftwareName = "em556n4" ProductSoftwareDesc = "3Com Megahertz LAN + 56K Modem Driver (Ethernet)" ProductSoftwareImage = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "em556n4Sys ndisDriver em556n4Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """em556n4Sys"" yes no container" NetRuleSoftwareClass = {"em556n4Driver basic"} NetRuleSoftwareBindable = {"em556n4Driver em556n4Adapter non exclusive 100"} ; Hardware ProductHardwareName = "em556n4" ProductHardwareDesc = "3Com Megahertz LAN + 56K Modem PC Card (Ethernet)" NetRuleHardwareType = "em556n4 em556n4Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"em556n4Adapter basic"} ; Registry Key ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] ; Now = {Sec from 1-1-1970, Year, Month, Day, Hour, Minute, Second} Now = {} ? $(!LIBHANDLE) GetSystemDate ;---------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; INPUT: None ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;---------------------------------------------------------------------------- [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;---------------------------------------------------------------------------- ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; $($R1): Option List ; $($R2): Option Text List ;---------------------------------------------------------------------------- [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; Check if the language requested is supported set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ; Check if the platforms requested is supported ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; Form a list of all the options and another of the text representing returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; 3. InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ;------------------------------------------------------------------------ [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 1 ; Check if the language requested is supported set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Set AdapterTypeValue = 4355 set OldOption = $(Option) set Option = em556n4 set-subst LF = "\n" read-syms GeneralConstants read-syms AllFileConstants read-syms FileConstants"-"$(Option) read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms AllFileConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait ; Set up the operation-mode-based variables and gaily welcome ; the user. If the "install mode" variable is improperly set, ; assume this is a new installation. Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter ; You cannot config the software component Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "<DBG> Cannot configure the software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ; Set the [Default values] ifstr(i) $(Option) == em556n4 set IOBaseAddrValue = *($(IOBaseAddrList), 17) ; IOBase Address = 0x300 set MemoryAddrValue = *($(MemoryAddrList), 9) ; Memory Address = 0xD0000 set IRQValue = *($(IRQList), 1) ; IRQ Level = 3 set MediaTypeValue = *($(MediaTypeList), 1) ; Media Type = TP set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), 2) ; Modem IOBase Address = 0x2F8 set ModemInterruptNumberValue = *($(IRQList), 1) ; Modem IRQ Level = 3 set ComPortValue = *($(ComPortList), 2) ; COM2 set LANOnlyValue = *($(LANOnlyList), 1) ; Disabled set FullDuplexValue = *($(FullDuplexList), 1) ; Disabled set Static1Label = "Note: Modem and Network use same interrupt" endif Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + ; First, check whether the same version of the software exists OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; Cannot Install the same software again Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; Add a new adapter card? Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ; dll load addition Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ; [BFC] Set FileToCheck = $($R1)\OEMSETNT.INF LibraryProcedure FilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck) Ifstr(i) $(FilePresent) != "YES" Goto installadapter Endif Set SrcDir = $($R1) install "Install-Dll" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; Get the current values of all the parameters configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "<DBG> Cannot find component product key" goto fatalregistry Endif Endif ; Get the other parameters; they're attached to the service parameters key Debug-Output "<DBG> INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "<DBG> INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) ; We don't need the services key, so close it. CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "<DBG> Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ; Get the old values from the Registry [Get Values] EnumRegValue $(KeyParameters) ValueList ifstr(i) $(Option) == em556n4 ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "IoBaseAddress_1" set IOBaseAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" set MemoryAddrIndex = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValueIndex = $(ValueData) else-ifstr(i) $(ValueName) == "ModemInterruptNumber" set ModemInterruptNumberIndex = $(ValueData) else-ifstr(i) $(ValueName) == "ComPort" set ComPortIndex = $(ValueData) else-ifstr(i) $(ValueName) == "Transceiver" set MediaTypeIndex = $(ValueData) else-ifstr(i) $(ValueName) == "LANOnly" set LANOnlyIndex = $(ValueData) else-ifstr(i) $(ValueName) == "FullDuplex" set FullDuplexIndex = $(ValueData) endif EndForListDo set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set ModemInterruptNumberValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex))) ifstr(i) $(MemoryAddrValue) == "" set MemoryAddrValue = *($(MemoryAddrValues), 2) endif set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex))) ifstr(i) $(IOBaseAddrValue) == "" set IOBaseAddrValue = *($(IOBaseAddrList), 1) endif set ModemIOBaseAddressValue = *($(ModemIOBaseAddressList), ~($(ComPortValues),$(ComPortIndex))) Debug-Output "<DBG> Configure/ComPortIndex "$(ComPortIndex) Debug-Output "<DBG> Configure/ModemIOBaseAddressValue "$(ModemIOBaseAddressValue) ifstr(i) $(ModemIOBaseAddressValue) == "" set ModemIOBaseAddressValue = *($(ModemIOBaseAddressValues), 2) endif set ComPortValue = *($(ComPortList), ~($(ComPortValues),$(ComPortIndex))) ifstr(i) $(ComPortValue) == "" set ComPortValue = *($(ComPortValues), 2) endif set MediaTypeValue = *($(MediaTypeList), ~($(MediaTypeValues),$(MediaTypeIndex))) ifstr(i) $(MediaTypeValue) == "" set MediaTypeValue = *($(MediaTypeValues), 1) endif set LANOnlyValue = *($(LANOnlyList), ~($(LANOnlyValues),$(LANOnlyIndex))) ifstr(i) $(LANOnlyValue) == "" set LANOnlyValue = *($(LANOnlyValues), 1) endif set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexIndex))) ifstr(i) $(FullDuplexValue) == "" set FullDuplexValue = *($(FullDuplexValues), 1) endif endif ; Put up the adapter configuration dialog if necessary. ; Note that $(CurrParamSettings) has the old known parameter values. adaptersetup = + Set from = adapteroptions adapteroptions = + ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto skipoptions endif LoadLibrary "disk 1" $(DialogDllName) hLib read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option) Debug-Output "<DBG> ----- Before calling my dialog -----" Debug-Output "<DBG> Combo1Out "$(Combo1Out) Debug-Output "<DBG> Combo2Out "$(Combo2Out) Debug-Output "<DBG> Combo3Out "$(Combo3Out) Debug-Output "<DBG> Combo6Out "$(Combo6Out) Debug-Output "<DBG> Combo7Out "$(Combo7Out) Debug-Output "<DBG> Combo8Out "$(Combo8Out) Debug-Output "<DBG> ButtonPressed "$(ButtonPressed) ui start "InputDlg" $(hLib) Debug-Output "<DBG> ----- After calling my dialog -----" set ExitButton = $(ButtonPressed) Debug-Output "<DBG> Combo1Out "$(Combo1Out) Debug-Output "<DBG> Combo2Out "$(Combo2Out) Debug-Output "<DBG> Combo3Out "$(Combo3Out) Debug-Output "<DBG> Combo6Out "$(Combo6Out) Debug-Output "<DBG> Combo7Out "$(Combo7Out) Debug-Output "<DBG> Combo8Out "$(Combo8Out) Debug-Output "<DBG> ButtonPressed "$(ButtonPressed) FreeLibrary $(hLib) ifstr(i) $(DLGEVENT) == "CONTINUE" ifstr(i) $(Option) == em556n4 set IOBaseAddrIndex = $(Combo1Out) set MemoryAddrIndex = $(Combo2Out) set IRQValueIndex = $(Combo3Out) set ModemInterruptNumberIndex = $(Combo6Out) set ComPortIndex = $(Combo7Out) set LANOnlyIndex = $(Combo8Out) set FullDuplexIndex = $(Combo9Out) set ExitButton = $(ButtonPressed) endif ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else set CommonStatus = STATUS_USERCANCEL ui pop 1 Debug-Output "<DBG> Action: unknown. Bye." goto end endif ; If installing, go create the necessary keys; ; if configuring, they're already open. skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; Add Software Component ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImage), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif ; At this point: ; $R1 contains the product version key handle; ; $R2 contains the NetRules subkey handle; ; $R3 contains the new Services key handle; and ; $R4 contains the Parameters key ; $R5 contains the Linkage Key set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "<DBG> Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) Debug-Output "<DBG> AddValueList - SoftwareType, MajorVersion,..." ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "<DBG> Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(OldOption)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) Debug-Output "<DBG> AddValueList - type, use, bindform, class, ..." ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "<DBG> Resgitry error: add value list." goto fatalregistry endif endif ; Create the HARDWARE\Netcard region and its corresponding service Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "<DBG> Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; At this point: ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number ; set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) Debug-Output "<DBG> AddValueList - Manufacturer, Title, Description,..." ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(OldOption)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) Debug-Output "<DBG> AddValueList - type, bindform, class, InfOption" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "<DBG> Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; REQUIRED: $(KeyParameters) contains service Parameters key handle writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error." goto ShellCodeError endif set BusTypeNum = 1 ; Force ISA ; Add the rest of the parameters to the Services area ifstr(i) $(Option) == em556n4 set MemoryAddrValue = *($(MemoryAddrValues), ~($(MemoryAddrList), $(MemoryAddrIndex))) set-add CommonMemoryAddrValue = $(MemoryAddrValue), 8192 set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList), $(IOBaseAddrIndex))) set MediaTypeValue = *($(MediaTypeValues), ~($(MediaTypeList), $(MediaTypeIndex))) set ComPortValue = *($(ComPortValues), ~($(ComPortList), $(ComPortIndex))) set ModemInterruptNumberValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex))) set ModemIOBaseAddressValue = *($(ModemIOBaseAddressValues), ~($(ComPortList), $(ComPortIndex))) Debug-Output "<DBG> Install/ComPortIndex "$(ComPortIndex) Debug-Output "<DBG> Install/ModemIOBaseAddressValue "$(ModemIOBaseAddressValue) set LANOnlyValue = *($(LANOnlyValues), ~($(LANOnlyList), $(LANOnlyIndex))) set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList), $(FullDuplexIndex))) set NewValueList = {{IoBaseAddress_1, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {IoLength_1, $(NoTitle),$(!REG_VT_DWORD), 16},+ {IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseAddressValue)},+ {IoLength, $(NoTitle),$(!REG_VT_DWORD), 7},+ {PCCARDAttributeMemoryAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+ {PCCARDAttributeMemorySize, $(NoTitle),$(!REG_VT_DWORD),8192},+ {PCCARDAttributeMemoryOffset, $(NoTitle),$(!REG_VT_DWORD),0},+ {MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(CommonMemoryAddrValue)},+ {MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {PCCARDMemoryWindowOffset, $(NoTitle),$(!REG_VT_DWORD),0},+ ; {Transceiver, $(NoTitle),$(!REG_VT_DWORD),$(MediaTypeValue)},+ {ModemIOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(ModemIOBaseAddressValue)},+ {ModemInterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(ModemInterruptNumberValue)},+ {InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {ComPort, $(NoTitle),$(!REG_VT_DWORD),$(ComPortValue)},+ {LANOnly, $(NoTitle),$(!REG_VT_DWORD),$(LANOnlyValue)},+ {FullDuplex, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+ {InternalCTRL, $(NoTitle),$(!REG_VT_DWORD),1310722},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+ {CardType, $(NoTitle),$(!REG_VT_DWORD),3},+ {Pcmcia, $(NoTitle),$(!REG_VT_DWORD),1},+ {OSType, $(NoTitle), $(!REG_VT_DWORD),1},+ {MediaType, $(NoTitle), $(!REG_VT_DWORD),1},+ {ModemFunction, $(NoTitle), $(!REG_VT_DWORD),1},+ {AdapterType, $(NoTitle), $(!REG_VT_DWORD), $(AdapterTypeValue)}} endif Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif Debug-Output "<DBG> AddValueList - IoBaseAddress,..." CloseRegKey $(KeyParameters) ; ---------------------------------------------------------------------------------------------------------- ; add driver info to the SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation ; ---------------------------------------------------------------------------------------------------------- ifstr(i) $(Option) == em556n4 OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "<DBG> CreateRegKey (3Com)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3Com",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey $(MyPcmciaKey) endif CloseRegKey $(MyPcmciaHandle) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 3CXEM556 B" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "<DBG> CreateRegKey (Megahertz 3CXEM556 B)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"Megahertz 3CXEM556 B",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey $(MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com\Megahertz 3CXEM556 B" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"em556n4"},+ {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:em556n4" CloseRegKey $(MyPcmciaHandle) endif ; ---------------------------------------------------------------------------------------------------------- ; add the comm port info to the SYSTEM\CurrentControlSet\Services\Serial\Parameters section of the registry ; ---------------------------------------------------------------------------------------------------------- ifcontains(i) $(Option) in {"em556n4", "ELPC3"} OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial" $(MAXIMUM_ALLOWED) MyNewSerialHandle Set NewValueList = { {PermitShare, $(NoTitle),$(!REG_VT_DWORD),1},+ {ShareInterrupt,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList) CloseRegKey $(MyNewSerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\Serialem556n4" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"Serialem556n4",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), "COM"$(ComPortValue)},+ ; "COMx" {ForceFifoEnable, $(NoTitle), $(!REG_VT_DWORD), 0},+ ; Always false {Interrupt, $(NoTitle), $(!REG_VT_DWORD), $(ModemInterruptNumberValue)},+ ; Interrupt for 3C562 Modem {PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ModemIOBaseAddressValue)}} ; I/O Base address for 3C562 Modem Shell $(UtilityInf), AddValueList, $(MyNewSerialHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - DosDevices, ForceFifiEnable,..." CloseRegKey $(MyNewSerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP\SERIALCOMM" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"SERIALCOMM",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif SetRegValue $(MyNewSerialHandle) {"Serialem556n4",$(NoTitle),$(!REG_VT_SZ),"COM"$(ComPortValue)} CloseRegKey $(MyNewSerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) MyNewSerialHandle Ifstr $(MyNewSerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyNewSerialHandle CloseRegKey $(SerialKey) endif SetRegValue $(MyNewSerialHandle) {"COM"$(ComPortValue)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"} CloseRegKey $(MyNewSerialHandle) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "<DBG> Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif ; Remove the driver registry instances OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(MAXIMUM_ALLOWED) MySerialHandle DeleteRegKey $(MySerialHandle) "em556n4" CloseRegKey $(MySerialHandle) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) MySerialHandle DeleteRegKey $(MySerialHandle) "Serialem556n4" CloseRegKey $(MySerialHandle) ; Delete the drivers set RemoveList = {} set RemoveList = >($(RemoveList), $(!STF_WINDOWSSYSPATH)"\DRIVERS\EM556N4.SYS") Debug-Output "RemoveList = "$(RemoveList) set Status = STATUS_SUCCESSFUL ForListDo $(RemoveList) Debug-Output "Removing "$($) LibraryProcedure Status , $(!LIBHANDLE), DelFile $($) Debug-Output "Status is "$(Status) EndForListDo goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; ; First determine whether we want to do upgrade or update for software ; or hardware component. Then we will determine whether the Mode is ; update or upgrade. ; ; If the same version of the product existed in the registry, we do ; update. Otherwise, we will do a upgrade ; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Upgrade software component ; ; see whether the same version exist or not ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) ; ; Update the binaries ; Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif ; Upgrade the version number ; SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ; ; do nothing for update ; ifint $(Version) != $(ProductVersion) ; ; If the major version number is not the same, ; it is major upgrade. So let Upgrade the product ; ; ; make other upgrade change if necessary ; endif CloseRegKey $(KeyProduct) else ; ; Cannot Open software key, goto ERROR ; goto fatalregistry endif else ; ; upgrade/update hardware component ; There is no different between upgrade and update for hardware ; component ; ; 1. Get the Service Name ; 2. Change the NetRule section if necessary ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) ; ; Get Service name ; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) ; ; Change the NetRule if necessary ; OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) ; ; Make the change.... ; else ; ; Error, cannot open net rules key ; goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif ; ; 3. Change the service section of the hardware. i.e., ; ParameterName change, value change, etc. ; OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) ; ; Get the ServiceKey to change the Start value ; or Type value. Or open Parameters key to ; change the hardware parameters if necessary. ; CloseRegKey $(ServiceKey) else ; ; Error, cannot open network card key ; goto fatalregistry endif endif goto end ; ; End of Upgrade Software ; ; ; Escape hatches ; successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end ; ; warning display ; warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif ; ; non fatal error display ; nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif ; ; Registry is broken ; fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal ; ; Netcard detection failure ; fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "<DBG> ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal ; ; fatal error display ; fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ; ; Shelling error ; ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ; ; if OEM_ABANDON_ON == TRUE, then remove the registry entries ; ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETNT.INF" Debug-Output $(InfName)"<DBG> **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)"<DBG> IRQ_Level is "$(!p:IRQ_Level) Debug-Output $(InfName)"<DBG> IOBaseAddrValue is "$(!p:IOBaseAddrValue) Debug-Output $(InfName)"<DBG> TransceiverValue is "$(!p:TransceiverValue) Debug-Output $(InfName)"<DBG> MemoryAddr is "$(!p:MemoryAddr) Debug-Output $(InfName)"<DBG> MappedValue is "$(!p:MappedValue) return ;*************************************************************** ; INSTALL SECTIONS ;*************************************************************** [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" ; ; Copy files in the copy list ; set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "Megahertz Lan + Modem PC Card Installation Disk", TAGFILE = em556n4.DSK [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, OEMSETNT.INF, SIZE=43500, RENAME=$(!UG_Filename) [Files-Dll] 1, em556nx.DLL, SIZE=100000 [Files-em556n4] 1, em556n4.SYS, SIZE=50000 [LanguagesSupported] ENG [AllFileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" DialogDllName = "em556nx.DLL" ;;;;;; START em556n4 ;;;;;; [FileConstantsENG-em556n4] FunctionTitle = "Megahertz LAN + 56K Modem PC Card (Ethernet)" ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) IRQList = ^(IRQChoices, 1) IRQValues = ^(IRQChoices, 2) IOBaseAddrList = ^(IOBaseChoices, 1) IOBaseAddrValues = ^(IOBaseChoices, 2) MemoryAddrList = ^(MemoryAddrChoices,1) MemoryAddrValues = ^(MemoryAddrChoices,2) MediaTypeList = ^(MediaTypeChoices, 1) MediaTypeValues = ^(MediaTypeChoices, 2) ComPortList = ^(ComPortChoices, 1) ComPortValues = ^(ComPortChoices, 2) LANOnlyList = ^(LANOnlyChoices, 1) LANOnlyValues = ^(LANOnlyChoices, 2) ModemIOBaseAddressList = ^(ModemIOBaseChoices,1) ModemIOBaseAddressValues = ^(ModemIOBaseChoices,2) FullDuplexList = ^(FullDuplexChoices, 1) FullDuplexValues = ^(FullDuplexChoices, 2) [DialogConstantsENG-em556n4] Help = "Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG-em556n4] DlgType = "RadioCombination" DlgTemplate = "em556nx" Caption = $(FunctionTitle) HelpContext = $(!IDH_DB_OEMNADE2_INS) CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO, NO, NO} Combo1Label = "I/O Port Address:" Combo2Label = "Memory Address:" Combo3Label = "Network Interrupt:" Combo4Label = "Media Type:" Combo5Label = "Modem Port Address:" Combo6Label = "Modem Interrupt:" Combo7Label = "Com Port:" ;Combo8Label = "LANOnly Mode:" Combo9Label = "Full Duplex:" ; Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrValue) Combo2List = $(MemoryAddrList) Combo2Out = $(MemoryAddrValue) Combo3List = $(IRQList) Combo3Out = $(IRQValue) Combo4List = $(MediaTypeList) Combo4Out = $(MediaTypeValue) Combo5List = $(ModemIOBaseAddressList) Combo5Out = $(ModemIOBaseAddressValue) Combo6List = $(IRQList) Combo6Out = $(ModemInterruptNumberValue) Combo7List = $(ComPortList) Combo7Out = $(ComPortValue) Combo8List = $(LANOnlyList) Combo8Out = $(LANOnlyValue) Combo9List = $(FullDuplexList) Combo9Out = $(FullDuplexValue) ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List,Combo6List,Combo7List,Combo8List,Combo9List} ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out,Combo6Out,Combo7Out,Combo8Out,Combo9Out} EditTextIn = {"",""} EditTextLim = {"",""} ;;;;;; END em556n4 ;;;;;; [MemoryAddrChoices] MA_1 = "0xC8000", 819200 MA_2 = "0xC9000", 823296 MA_3 = "0xCA000", 827392 MA_4 = "0xCB000", 831488 MA_5 = "0xCC000", 835584 MA_6 = "0xCD000", 839680 MA_7 = "0xCE000", 843776 MA_8 = "0xCF000", 847872 MA_9 = "0xD0000", 851968 MA_10 = "0xD1000", 856064 MA_11 = "0xD2000", 860160 MA_12 = "0xD3000", 864256 MA_13 = "0xD4000", 868352 MA_14 = "0xD5000", 872448 MA_15 = "0xD6000", 876544 MA_16 = "0xD7000", 880640 MA_17 = "0xD8000", 884736 MA_18 = "0xD9000", 888832 MA_19 = "0xDA000", 892928 MA_20 = "0xDB000", 897024 MA_21 = "0xDC000", 901120 MA_22 = "0xDD000", 905216 MA_23 = "0xDE000", 909312 MA_24 = "0xDF000", 913408 MA_25 = "0xE0000", 917504 MA_26 = "0xE1000", 921600 MA_27 = "0xE2000", 925696 MA_28 = "0xE3000", 929792 MA_29 = "0xE4000", 933888 MA_30 = "0xE5000", 937984 MA_31 = "0xE6000", 942080 MA_32 = "0xE7000", 946176 MA_33 = "0xE8000", 950272 MA_34 = "0xE9000", 954368 MA_35 = "0xEA000", 958464 MA_36 = "0xEB000", 962560 MA_37 = "0xEC000", 966656 MA_38 = "0xED000", 970752 MA_39 = "0xEE000", 974848 MA_40 = "0xEF000", 978944 [IRQChoices] IRQ_1 = "3",3 IRQ_2 = "4",4 IRQ_3 = "5",5 IRQ_4 = "7",7 IRQ_5 = "9",9 IRQ_6 = "10",10 IRQ_7 = "11",11 IRQ_8 = "15",15 [ModemIOBaseChoices] MdmIOBase_1 = "0x3F8",1016 MdmIOBase_2 = "0x2F8",760 MdmIOBase_3 = "0x3E8",1000 MdmIOBase_4 = "0x2E8",744 [ComPortChoices] CP_1 = "COM1", 1 CP_2 = "COM2", 2 CP_3 = "COM3", 3 CP_4 = "COM4", 4 [LANOnlyChoices] MS_1 = "Disabled", 0 MS_2 = "Enabled", 1 [IOBaseChoices] IOBase_1 = "0x200",512 IOBase_2 = "0x210",528 IOBase_3 = "0x220",544 IOBase_4 = "0x230",560 IOBase_5 = "0x240",576 IOBase_6 = "0x250",592 IOBase_7 = "0x260",608 IOBase_8 = "0x270",624 IOBase_9 = "0x280",640 IOBase_10 = "0x290",656 IOBase_11 = "0x2A0",672 IOBase_12 = "0x2B0",698 IOBase_13 = "0x2C0",714 IOBase_14 = "0x2D0",730 IOBase_15 = "0x2E0",746 IOBase_16 = "0x2F0",752 IOBase_17 = "0x300",768 IOBase_18 = "0x310",784 IOBase_19 = "0x320",800 IOBase_20 = "0x330",816 IOBase_21 = "0x340",832 IOBase_22 = "0x350",848 IOBase_23 = "0x360",864 IOBase_24 = "0x370",880 IOBase_25 = "0x380",896 IOBase_26 = "0x390",912 IOBase_27 = "0x3A0",928 IOBase_28 = "0x3B0",944 IOBase_29 = "0x3C0",960 IOBase_30 = "0x3D0",976 [MediaTypeChoices] MT_1 = "TP (10BaseT)", 0 MT_2 = "COAX (10Base2)", 1 [FullDuplexChoices] FD_1 = "Disabled", 0 FD_2 = "Enabled ", 1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.