1. JACKSON2.EXE Driver
2. WFWNDIS2.TXT File Contents

WFWNDIS2.TXT Driver File Contents (JACKSON2.EXE)

WFWNDIS2.TXT file
3Com Corporation
3Com Megahertz LAN + Modem PC Card (3CxEM556 PC Card family)
Network Drivers Installation Notes


              WINDOWS FOR WORKGROUPS v3.11 AND
                MICROSOFT WINDOWS NETWORKING


 This document describes how to configure the "3Com Megahertz 
 LAN + 56K Modem PC Card" for use with Windows for Workgroups 
 v3.11 and Microsoft Windows Networking. These procedures 
 are also described in the 3Com Megahertz LAN + 56K Modem 
 PC Card User's Guide, Chapter 3, "Setup for Windows".

 If you are going to install both the Novell NetWare client and
 the Microsoft Windows networking client, you must install the 
 Novell NetWare client first.


 NOTE: The following instructions assume that you have not 
       installed any other network adapter. If you have already 
       been using a network adapter on your computer, some of 
       these instructions may not apply or may produce different 
       results.  In this case, please refer to your System
       Administrator or MIS department for instructions.

 Before installing the network driver, you will need the
 following information to use in the setup dialog boxes:

      - Name of the NT Server domain or Windows 95/WFW 3.11
        Workgroup to which you belong.
      - The latest versions of the Card and Socket Services
        installed on your machine. Check with your computer
        manufacturer if you are not sure.

 You will also need to have the following software components:

      - Windows for Workgroups v3.11 installation files (either
        on hard disk, floppy diskettes, or CD).
      - The Installation Disk #2 that came with your LAN + Modem
        card.


Installing a New Client
-----------------------

 1.  From Windows, open the Network group. Double click on
     the Network Setup icon to open the Network Setup dialog
     box. 

     If networking has not been installed, you will see
     nothing in the network drivers window. If it looks like
     networking has been installed, ignore this procedure and
     use the procedures for "Installing an Additional Client".

 2.  Click on the Networks icon to open the Networks dialog
     box. Three radio buttons appear at the left edge of the 
     dialog box which describe the type of network support
     that Windows offers.  If there is the name of another
     network client listed on the bottom of this window, use 
     the procedures in "Installing an Additional Client".

 3.  Select Install Microsoft Windows Network and click OK.

 4.  Click "Drivers" to open the Network Drivers dialog box.

 5.  Click "Add Adapter" to display a list of possible choices for
     the adapter. 

 6.  Select "Unlisted" or "Updated Network Adapter" and click OK.

 7.  At the Install Driver prompt, insert Installation Disk #2 
     in the floppy drive and click OK. 

 8.  Select the "3Com Megahertz LAN + 56K Modem PC Card" and 
     click OK.  

     You will see the following added to the list of network 
     drivers:

         3Com Megahertz LAN + 56K Modem PC Card [NDIS2]

 9.  Click "Close". When the Network Setup Dialog box reopens, it
     will show the "3Com Megahertz LAN + 56K Modem PC Card" in 
     the Network Drivers window. Click OK.

10.  Supply the information requested in the Microsoft Windows
     Network Names dialog box. Your MIS department or System
     Administrator should be able to supply the information 
     you need. When the information is complete, click OK.

11.  The installer will request various disks for installation.
     
 Reboot the system when you are finished. 

 You will have network access when the system restarts. Refer
 to your Windows Manual for instructions on using Microsoft
 Windows Networking.


 Installing an Additional Client
 -------------------------------

 If there is NetWare (ODI) or other client already installed on
 your system, follow this procedure:

 1.  From Windows, open the Network group. Double click on the
     Network Setup icon to open the Network Setup dialog box.

 2.  Write down the name of the client listed on the last line of
     the Networks dialog box. (You will need this name later.)

 3.  Click "Install Microsoft Windows Network". At the bottom of
     the window you will see other selections. Click "Other".

 4.  Find the name of the client you noted in Step 2, select it,
     and click OK.

 5.  Click "Drivers" to open the Network Drivers dialog box.

 6.  Click "Add Adapter" to display a list of possible choices for
     an adapter. Select "Unlisted" or "Updated Network Adapter" and
     click OK.

 7.  At the Install Driver prompt, insert the Installation 
     Disk #2 in the floppy drive and click OK. 

 8.  Select the "3Com Megahertz LAN + 56K Modem PC Card" and 
     click OK.  
 
     You will see the following added to the list of network 
     drivers:

         3Com Megahertz LAN + 56K Modem PC Card [NDIS2]

 9.  Click "Close". When the Network Setup Dialog box reopens,
     it will show the 3CxEM556 card in the Network Drivers window.
     Click OK.

10.  A Windows Setup dialog box will open to alert you if there 
     are of files for the existing client. Select "No" if you
     want to maintain your access to the other network. Windows
     may ask this question several times, depending on how many
     references to the previous network it finds. Select "No"
     each time.

11.  The installer will request various disks for installation.
 
 When finished, you will be asked to reboot the system.

 You will have network access when the system restarts. Refer to
 your Windows Manual for instructions on using Microsoft
 Windows Networking.

 NOTE: If you are attaching to both Novell and Microsoft Networks, 
       please refer to WFWNETWR.TXT.


(%VER WFWNDIS2.TXT v5.56.0)