PROTOCOL.INI Driver File Contents (VIA823x_40.zip)

[FETND_NIF]
  DRIVERNAME=FETND$

; AUTO = 1 or 0        Enable Auto Negotiation
; SPEED = 10 or 100    Set line speed = 10 or 100 Mbps
; FULLDUPLEX = 0 or 1  Set to FullDuplex or HalfDuplex
; BUSNO = 1            Set physical slot of adapter,  
;                      Usful for 2 adapters. 
; DEVICENO = 1         Set physical slot of adapter,  
;                      Usful for 2 adapters. 
; CONNECTIONTYPE =  AUTOSENSE       Enable Auto Negotiation
;                   _10BaseT        Set line speed=10, halfduplex mode
;                   _10BaseTFD      Set line speed=10, fullduplex mode
;                   _100BaseTX      Set line speed=100, halfduplex mode
;                   _100BaseTXFD    Set line speed=100, fullduplex mode
; FLOWCTRL  =    HARDWARE_DEFAULT   Set to use hardware's default flow control ability
;                ENABLE             Enable flow control ability
;                DISABLE            Disable flow control ability
; NETWORKADDRESS    = "000123456789"    Override network address
;
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.67