Windows 95(*) Driver for S3 Trio32(*), S3 Trio64(*), and S3 Trio64V+(*) Version 2.01-02b ------------ INSTALLATION ------------ 1. Start Windows 95. 2. Click Start button, and then point to Settings. 3. Click the Control Panel icon. 4. Double-click the Display icon. 5. Click the Setting tab. 6. Click the Change Display Type button. 7. Under Adapter Type click Change. 8. Click the Have Disk. 9. Enter the drivers location path. If installing from floppy, enter the drive letter (i.e. a:) and click OK. 10. Select the device driver to install and click OK. 11. When the installation completes, click the Close button. 12. Set the display resolution and color depth a using the Desktop Area and Color Palette options, then click the Apply button. 13. Restart your computer. -------- FEATURES -------- 1. Supports linear address by default. 2. Supports 16-bit and 32-bit read and write MMIO and re-locatable MMIO address. 3. Supports hardware polygons. 4. Allows both graphics engine and linear address to be enabled simultaneously. -------------- KNOWN PROBLEMS -------------- WINBENCH - The clock shape cursor is not presented at the screen center while the test is running. COLOR PALETTE- The color palette is corrupted when you install Windows 95 on a computer running Window 3.1 in True Color mode. Even though the screen is almost unreadable the installation process runs correctly. ____________________________________________________________________________ S3* Trio32*, Trio64*, and Trio64V+* Refresh Property Sheet for use with the Windows* 95 operating system. -------------------- 1.0 REVISION HISTORY -------------------- May 1996: Original Release. Version 1.4a. ----------------- 2.0 INTRODUCTION ----------------- This diskette contains the Refresh Property Sheet for onboard S3* Trio32*, Trio64*, and Trio64V+* video solution hardware. The Refresh Property Sheet adds a page to Display Properties in Control Panel, which enables the user to check and change the monitor refresh rate setting. ------------------------ 3.0 UTILITY INSTALLATION ------------------------ 1. Start the Windows* 95 operating system. 2. Insert the diskette into the diskette drive. 3. From Windows, Double-click on My Computer. 4. Double-click on the icon for the floppy drive which contains the diskette. 5. Right-click (click on right mouse button) on the icon titled S3_refre.inf 6. A pull-down menu will appear. Select Install from the pull-down menu. -------------- 4.0 LIMITATION -------------- 56Hz setting - Selecting the 56Hz refresh rate setting will set the monitor refresh rate for 43Hz (or 86Hz interlaced). This limitation will be fixed on the next release of the Refresh Property Sheet. ------------------------------ 5.0 COPYRIGHTS AND TRADEMARKS ------------------------------ * Other brands and trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.