[Identification]
OptionType = MONITOR
[Options]
"KX-P8410 SCSI" = PPMNT40A
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_InstallOption
endif
set OptionList = ""
set MonitorOption = #(Options, $(Option), 1)
installtheoption = +
ifstr(i) $(AddCopy) == "YES"
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "Adding video files to copy list failed"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
set MonitorPath = $(!STF_PRNMONITORPATH)"\"#(Files-PrinterMonitor, $(MonitorOption), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(MonitorPath)
ifstr(i) $(STATUS) == NO
set OptionText = #(OptionsText$($0), $(Option), 1)
shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String4)$(OptionText)$(String5)
Debug-Output "Copying printer files failed"
goto finish_InstallOption
endif
install Install-Configure
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Installing printer monitor failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
ifstr(i) $(STATUS) != "ADDED"
set OptionText = #(OptionsText$($0), $(Option), 1)
ifstr(i) $(STATUS) == "PRESENT"
shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String1)$(OptionText)$(String2)
set Status = STATUS_SUCCESSFUL
else-ifstr(i) $(STATUS) == "DENIED"
shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String6)
else
shell "subroutn.inf" SetupMessage $($0) "NONFATAL" $(String1)$(OptionText)$(String7)
endif
goto finish_InstallOption
endif
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
Return $(Status)
[Install-AddCopyOption]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionKeyFileToCopyList Files-PrinterMonitor +
$(MonitorOption) +
$(SrcDir) +
$(!STF_PRNMONITORPATH)
exit
[Install-DoCopyOption]
CopyFilesInCopyList
exit
[Install-Configure]
set Model = $(Option)
set Monitor = #(Files-PrinterMonitor, $(MonitorOption), 2)
LibraryProcedure STATUS, $(!LIBHANDLE), SetupAddPrinterMonitor +
$(Model) +
$(!STF_PRNENVIRONM) +
$(Monitor) +
$(!STF_PRINTSERVER)
exit
[ExternalInstallOption]
Set !G:DebugOutputControl = 0
set Exit_Code = $(!SETUP_ERROR_GENERAL)
set DrivesToFree = {}
install LoadSetupLibrary
ifstr(i) $(STF_LANGUAGE) == ""
goto end
else-ifstr(i) $(OPTION) == ""
goto end
else-ifstr(i) $(ADDCOPY) == ""
goto end
else-ifstr(i) $(DOCOPY) == ""
goto end
else-ifstr(i) $(DOCONFIG) == ""
goto end
endif
read-syms PlatformID
read-syms ProductType
ifstr(i) $(STF_PLATFORM) == $(PlatformID_I386)
set STF_PRNPLATFORM = "w32x86"
set STF_PRNENVIRONM = "Windows NT x86"
else
goto end
endif
read-syms UiVars
detect UiVars
read-syms Strings$(STF_LANGUAGE)
ifstr(i) $(STF_SRCDIR) != $(STF_CWDDIR)
goto skip_asksource
endif
set STF_SRCDIR = A:\
shell "registry.inf" GetNTSource
ifint $($ShellCode) != $(!SHELL_CODE_OK)
else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
else
set STF_SRCDIR = $($R1)
endif
debug-output $(OPTION)
Split-String $(STF_SRCDIR) "\" SrcDirList
set TestItem = *($(SrcDirList), 3)
ifstr(i) $(TestItem) == $(STF_PLATFORM)
set STF_SRCDIR = *($(SrcDirList), 1)"\"
endif
set TempSrcDir = $(STF_SRCDIR)"LexmarkBackSlashTest"
Split-String $(TempSrcDir) "\" SrcDirList
QueryListSize ListSize $(SrcDirList)
set TestItem = *($(SrcDirList), $(ListSize))
ifstr(i) $(TestItem) != "LexmarkBackSlashTest"
set STF_SRCDIR = $(STF_SRCDIR)"\"
endif
shell "subroutn.inf" DoAskSource $(STF_SRCDIR)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "shelling DoAskSource failed"
goto end
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set STF_SRCDIR = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
goto end
endif
skip_asksource = +
LibraryProcedure IsFullPath, $(!LIBHANDLE), CheckPathFullPathSpec $(STF_PRNMONITORPATH)
ifstr(i) $(IsFullPath) == "NO"
LibraryProcedure STATUS, $(!LIBHANDLE), ProcessForUNC $(STF_PRNMONITORPATH)
ifstr(i) $(STATUS) == "ERROR"
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3)
goto end
else-ifstr(i) $(STATUS) == "NOT-UNC"
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3)
goto end
else-ifstr(i) $(STATUS) == "UNC-FAILCONNECT"
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3)
goto end
else
set STF_PRNMONITORPATH = $(STATUS)
endif
endif
shell "" InstallOption $(STF_LANGUAGE) $(OPTION) $(STF_SRCDIR) $(ADDCOPY) $(DOCOPY) $(DOCONFIG)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Execing InstallOption failed"
goto end
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set Exit_Code = $(!SETUP_ERROR_SUCCESS)
else-ifstr(i) $($R0) == STATUS_USERCANCEL
set Exit_Code = $(!SETUP_ERROR_USERCANCEL)
endif
end =+
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
install FreeSetupLibrary
exit
[LoadSetupLibrary]
LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
exit
[FreeSetupLibrary]
FreeLibrary $(!LIBHANDLE)
exit
[PlatformID]
PlatformID_I386 = I386
[UiVars]
STF_CONTROLSET = CurrentControlSet
STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir
STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
STF_PRNMONITORPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
[Source Media Descriptions]
1 = "Driver & Utility for Panasonic KX-P8410"
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-PrinterMonitor]
PPMNT40A = 1, PPMNT40A.DLL, SIZE=999
[LanguagesSupported]
ENG
[OptionsTextENG]
"KX-P8410 SCSI" = "KX-P8410 SCSI"
[StringsENG]
String1 = "The monitor "
String2 = " is already installed."
String3 = "Failed to connect to the print server."
String4 = "The monitor files for the selected monitor "
String5 = " couldn't be copied. Failed to install the monitor."
String6 = "Access is denied. You must be logged on as a member of the Administrators "+
"group to carry out this operation."
String7 = " could not be installed."
[ProgressCopyENG]
ProCaption = "KX-P8410 SCSI Setup"
ProCancel = "Cancel"
ProCancelMsg= "KX-P8410 SCSI is not correctly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap= "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.