INSTRUCTIONS ON THE FOLLOWINGS FOR "EZSHOOT" DIAGNOSTIC:
EZSHOOT is a DOS application, it can only run on REAL DOS.
These instructions will show you how to get to REAL DOS MODE from the
platform that you are in.
1.WINDOWS 95
2.WINNT 3.5 or WINNT 4.0
3.WINDOWS for WORKGROUP 3.11
4.OS/2 WARP
5.MS-DOS
6.BOOT FROM FLOPPY
7.EXECUTE "EZSHOOT" FROM FLOPPY OR HARDDISK
1.WINDOWS 95:
Click the "Start Button", and then click "Shut Down".
Click Yes, then choose "Restart the computer in MS-DOS mode".
IMPORTANT: EZSHOOT cannot run on Virtual Dos, Real Dos mode ONLY.
2.WINNT 3.5 or WINNT 4.0:
Assume that you have MS-DOS.
From BOOTPART SYSTEM STARTUP choose MS-DOS.
If you are already in WINNT, choose "Shut Down Restart Computer".
If you do not have MS-DOS OPERATING SYSTEM installed then
refer to "6.BOOT FROM FLOPPY"
3.WINDOWS for WORKGROUP 3.11:
Choose "Exit Windows" and run from MS-DOS.
4.OS/2 WARP:
Click "Shutdown" and refer to "6.BOOT FROM FLOPPY".
5.MS-DOS:
If your adapter is loaded automatically
in the AUTOEXEC, then you must temporary remark those line(s).
Or, you can press the key <F5> on your keyboard at startup so that
it will bypass your AUTOEXEC and CONFIG.
6.BOOT FROM FLOPPY:
Format and make system disk on your floppy.
EXAMPLE: format a: /s
Or you can use the MS-DOS setup disk 1 to boot.
This will allow your system to boot from your floppy and bypassing
the CONFIG and AUTOEXEC.
6.EXECUTE "EZSHOOT" FROM FLOPPY OR HARDDISK:
From floppy - Change to EZSHOOT directory and type "shooter".
Running from floppy will take a longer process.
From Harddisk - At dos prompt, change to EZSHOOT directory and
type "shooter".
It is recommended that you install and run EZSHOOT from your harddisk.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.