(C)Copyright 2003 Marvell(R). All rights reserved =========================================================================== SetupDLinkNet2K.txt created 21-Aug-2003 Readme File for D-Link Network Installation Package v4.14 for Windows 2000 (x86) for the D-Link DGE-530T Gigabit Ethernet Adapter. This file contains 1 Overview 2 Required Files 3 Installation Instructions 4 Virtual LAN (VLAN) Support 5 Driver Options 6 Troubleshooting =========================================================================== 1 Overview =========== m4cxw2k is the NDIS5 32-bit Miniport driver for the D-Link DGE-530T Gigabit Ethernet Adapter. This README file explains how to install the D-Link Network Installation Package on a machine running Windows 2000 (x86). This package consists of the Miniport driver, the Virtual LAN (VLAN) intermediate driver and the configuration utility D-Link Network Control. The package supports configuration of VLANs. For further information see the section on VLANs below. ************************************************************************** NOTE: The NDIS5 Miniport driver can only be used with Windows 2000 (x86). ************************************************************************** *** 2 Required Files ================= To install the D-Link Network Installation Package, the following file(s) are required: SetupDLinkNet2K.exe D-Link Network Installation Package *** 3 Installation Instructions ============================ Installation of the adapter: Read the installation instructions in the adapter manual carefully. Follow these instructions to install the adapter in your computer. Installation of the driver software: With PCI adapters, due to the plug & play facility of PCI, Windows is able to find, identify and configure the adapter automatically. If you install Windows 2000 (x86) with an already inserted D-Link DGE-530T Gigabit Ethernet Adapter the adapter is installed as "PCI Ethernet Controller" under "Other Devices". You have to uninstall the driver. If you install a D-Link DGE-530T Gigabit Ethernet Adapter Windows 2000 (x86) will ask for a new driver. Cancel the installation process. 1. On the desktop right click on "My computer" and select "Manage". 2. In "Device Manager" find the adapter you wish to update. 3. Right click on the adapter and select "Uninstall". 4. To install the D-Link Network Installation Package execute the setup file SetupDLinkNet2K.exe and follow the instructions. *** 4 Virtual LAN (VLAN) Support ============================= VLAN support is available after installing or updating the skvlan.sys driver. Along with the driver itself, the D-Link Network Control is installed automatically. It can be used to add, remove and configure VLANs. After installing or updating the driver, start the D-Link Network Control as follows: 1. Click on "Start" - "Settings" - "Control Panel". 2. Double-click on "Network Control". Use the online help provided by the D-Link Network Control for general information on VLANs and learn how to add, remove and configure them. *** 5 Driver Options ================= You can modify several options of the m4cxw2k driver in order to optimize the operation of your D-Link DGE-530T Gigabit Ethernet Adapter. The driver options/parameters can be set with the D-Link Network Control, which is automatically installed along with the driver, as follows: 1. Click on "Start" - "Settings" - "Control Panel". 2. Double-click on "Network Control". 3. Select the network adapter or port for which you want to modify an option/parameter. The available options/parameters are displayed in the lower half of the D-Link Network Control window. 4. Modify the desired option(s)/parameter(s) according to your needs. 5. Click on "Apply". Use the online help provided by the D-Link Network Control for an explanation of the available options/parameters and learn how to configure them. *** 6 Troubleshooting ================== If you should encounter any problems with your D-Link DGE-530T Gigabit Ethernet Adapter, please re-read the instructions above and the documentation supplied with the operating system carefully. Additionally refer to your system event log file (using the Event Viewer) and check it for entries from m4cxw2k. If your particular problem is not listed or the error persists, please send your system event log file or at least the event id number and the logging data (as WORDs) of the entries made by m4cxw2k to our technical support. For further information please contact D-Link support. *** End of Readme File ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.