--------------------------------------------------------------------------------------------------- Samsung Server SS130/SS115 mBMC Configuration RELEASE NOTES --------------------------------------------------------------------------------------------------- DATE: 2004/08/27 TO: Samsung server board User SUBJECT: mBMC Configuration Package Revision: 0.0D ------------------------------------------------------------------------------ * Installation ------------------------------------------------------------------------------ Unzip this package to floopy and execute FRUSDR.BAT in real DOS mode as following: A:> FRUSDR.BAT ------------------------------------------------------------------------------ * Contents of this package ------------------------------------------------------------------------------ release.txt (0.0D) - Release note frusdr.bat (0.0D) - Batch file for the main process control reply.com (n/a) - Simple utility to get a user interaction in batch process ipmitool.exe (2.13) - mBMC command agent mfru.exe (0.6) - FRU loader for mBMC msdr.exe (0.2) - SDR loader for mBMC SS115V2.FRU (0.2) - SS115 baseboard FRU data SS130V6.FRU (0.6) - SS130 baseboard FRU data Hi_mbmcD.sdr (0.13) - SS130/SS115 SDR data Hi_minid.txt (0.0D) - mBMC configuration and initializaion data ------------------------------------------------------------------------------ * Known Issue ------------------------------------------------------------------------------ Rev 0.0D - CMOS Clear feature does not work. Rev 0.0C - None Rev 0.0B - None Rev 0.0A - None Rev 0.09 - None Rev 0.08 - None Rev 0.07 - None Rev 0.06 - None Rev 0.05 - Fan Fault LED will not be supported with mBMC Rev 0.04 - Fan SDR parameter is incorrect. - Fan Fault LED is not turned on. - FRB Feature will be disabled until BIOS feature complete. ------------------------------------------------------------------------------ * Dependancy ------------------------------------------------------------------------------ Rev 0.0D - None. Rev 0.0C - None. Rev 0.0B - Use the latest release fan pack, unless there would be blinking amber for sigle CPU configuration. Rev 0.0A - None Rev 0.09 - Use with SS130 Fab2 or later - Use with SS130 BIOS 28 or later!!! Rev 0.08 - Use with SS130 Fab2 or later - Use with SS130 BIOS 28 or later!!! Rev 0.07 - Use with SS130 Fab2 or later - Use with SS130 BIOS 23 or later!!! Rev 0.06 - Use with SS130 Fab2 or later - Use with SS130 BIOS 23 or later!!! Rev 0.05 - Use with SS130 Fab2 or later - Use with SS130 BIOS 23 or later!!! - For the correct fan control BIOS 24 or later should be used. Rev 0.04 - None Rev 0.03 - Use with the SS130 BIOS 13 or later Rev 0.02 - Use with the mBMC FW rev 2.31 Rev 0.01 - Unknown ------------------------------------------------------------------------------ * History ------------------------------------------------------------------------------ Rev 0.0D - Changed CMOS clear pef table - Updated utility changes Rev 0.0C - Added support for the SS115 Rev 0.0B - Changed CPU UNC thresholds. - Changed lookup table for binding CPU Rev 0.0A - Changed fan configuration for 1 CPU system Rev 0.09 - Changed LED Control map - Removed unused menu Rev 0.08 - Changed LED Control table and PEF table Rev 0.07 - Changed lm93 access method - Updated mFRU utility Rev 0.06 - Changed product name - Changed some sensor name for mBMC padding issue Rev 0.05 - Updated SDR fan parameters - Removed fab1 board support - Enabled FRB3 feature - Added SDR Disk backplane FRU locator Rev 0.04 - Updated mFRU utility - Changed Sesnor Number and removed unused sensors - Updated PEF table Rev 0.03 - Changed Sensor access table - Changed PEF table - Changed mBMC init table Rev 0.02 - Updated EPS 0.5 changes - Added master.cfg file auto-creation feature. Rev 0.01 - Initial Release ------------------------------------------------------------------------------ * Reference ------------------------------------------------------------------------------ SS130/SS115 mini Baseboard Management EPS Revision 1.0 PC87431M mini-Baseboard Management Controller (mBMC) datasheet Revision 0.18Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.