--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette which contains awfl823e.exe and BIOS file(W9xxxIMS.xxx) you want
to flash in ROM. Both files can be found in the package you download.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "awfl823e w9125ims.xxx /sn/py/cc/cp/f", then press ENTER
"w9125ims.xxx" is the BIOS file name
5. After flashing complete, press F1.
6. Press DELETE when first reboot after flashing.
7. Load BIOS optimized defaults, then save settings and exits.
------------------
Special Note:
The BIOS and DEVICE DRIVERS contained here are exclusively for MSI products only.
MSI assumes no responsibility for any damages resulting from improper use or
lack of technical expertise.
WARNING!!!!!
Do not FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!
Do not FLASH WHEN YOUR SYSTEM ISN'T RUNNING STABLE!!!!
Do not FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!!
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.