1. 12.0.1-0057_SAS_FW_Image_APP-2.0.03-0673.zip Driver
2. 12.0.1-0057_SAS_FW_Image_APP-2.0.03-0673.txt File Contents

12.0.1-0057_SAS_FW_Image_APP-2.0.03-0673.txt Driver File Contents (12.0.1-0057_SAS_FW_Image_APP-2.0.03-0673.zip)

************************************

LSI Logic MegaRAID Firmware Release 

************************************

Release date: 08/20/09

====================== 
Supported Controllers:
======================

MegaRAID SAS 9260-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e

Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 08/20/09


Version Numbers:	
===============
Current Firmware Package:    12.0.1-0057
Current Package Details:     APP-2.0.03-0673_BB-2.00.00.00-0018_BIOS-3.07.00_WEBBIOS-3.0-19-e_10-Rel_NVDATA-2.02.0030
			     
Previous Firmware Package:    12.0.1-0045
Previous Package Details:     APP-2.0.03-0654_BB-01.250.04.219_BIOS-3.06.00_WEBBIOS-3.0-18-e_9-Rel_NVDT_2.02.0026
			      

Bug Fixes and Enhancements:
===========================

Firmware:
 LSID100126343(DFCT)Possible Data miscompare on Raid 5 WB LD when running error injection script
 LSID100126250(DFCT)Foreign config handling issue with automated script.
 LSID100126190(DFCT)Small IO size Seq reads with low QD performing lower than Mercury Gen 1 card
 LSID100131654(DFCT)CC on R1 VD didn't correct every inconsistencies the first time it ran
 LSID100126667(DFCT)Degraded PR11 to any RaidLevel allows to remove only offline drives
 LSID100131083(DFCT)Length of parameter list defined in Mode Select (Page19) is not set properly from AF FW.
 LSID100131084(DFCT)Length of parameter list defined in Mode Select (Page08) is not set properly from AF FW.
 LSID100131300(DFCT)mode parameter length is hard coded for caching page
 LSID100131534(DFCT)Set factory defaults should clear persistent nvdata
 LSID100131231(DFCT)(#23393.1) Rebuid Not Kick In During Cycle enclosure power while running I/O
 LSID100131487(DFCT)4 drive inconsistent PRL 11 VD is markd consistent after single drive rebuild.
 LSID100126568(DFCT)GetLDDistribution fails when importing R10 from SASIR2 to Gen2 MR
 LSID100125987(DFCT)Evt #34 "Not enough controller memory" generated during adapter diagnostics
 LSID100126640(DFCT)SGPIO In Critical, In Failed and PFA Missing
 LSID100131252(DFCT)Change CATERA nvdata page 12 and 13 similar to Gen1 nvdata
 LSID100126199(DFCT)Failed I2C send diag cmd due to transfer of less than requested parameter list
 LSID100126714(DFCT)Auto rebuild fails when unsecured SED inserted in the hot slot of a secured VD
 LSID100131032(DFCT)Auto rebuild failure on secured SED when inserted in the hot slot of unsecure VD
 LSID100126462(DFCT)Firmware crashes when SSU gets an 06/3f/01 check condition during DISM
 LSID100132112(DFCT)F/W crash on reboot after flashing the drives.
 LSID100131074(DFCT)Line index being used for CMe reassigns is wrong
 LSID100125962(DFCT)FW breaks into "Fatal firmware error: Line 2578 in ../../dm/mpt2/mptcmd.c" mon_tasks while pull <--> push to rebuild SATA PDs
 LSID100126314(DFCT)Mercury 2108 external port LEDs not illuminated when  links are active
 LSID100126494(DFCT)SATA medium error recovery leads to PL hard reset and FW crash
 LSID100126538(DFCT)FW crash with invalid SGL during SATA medium error recovery
 LSID100126655(DFCT)Debugger hit montask running multi-path script with power cycle enclosure overnight
 LSID100126664(DFCT)FW hangs during SATA uncorrectable medium recovery
 LSID100126867(DFCT)Phy error counters not updated in SAS Phy Page
 LSID100130994(DFCT)AF B2 H800 - FW goes to megamon in Multipath config with Gen 2 & Gen 1 mix enclosures
 LSID100131023(DFCT)FW breaks into Montask - MPTREC:Target Reset Does not Complete All the Commands
 LSID100131025(DFCT)FW break into megamon with SSD SATA drives connected to the controller card
 LSID100131055(DFCT)FW hits montask when removing cable from enclosure.
 LSID100131185(DFCT)PL reset due to PD command timeouts while running I/O on a 4-span R50 on McCave
 LSID100126724(DFCT)Discovery issue on McCave with SATA drives with FW package 12.0.1-0034/-0038
 LSID100131246(DFCT)PL fails to handle correctly a bad SATA drive during discovery
 LSID100131273(DFCT)FW keeps hitting Fault 5841 during removing <--> inserting one path with rebuilding PDs in multipath SAS environment
 LSID100131289(DFCT)Update FW code to work with revision B3 (and above) 2108 devices
 LSID100126641(DFCT)AF B2 H800 FW hangs when SATA drive with Alta is connected to Red Devil
 LSID100125810(DFCT)Foreign configuration not detected after pinned cache discarded
 LSID100131108(DFCT)reinsert the drive and report wrong slot number on msm v3.04-05
 LSID100131111(DFCT)Rebuild fails to start on PD (part of RAID array) after pull/push operation.
 LSID100131168(DFCT)AF RC1 PKG49: Pull/push of rebuilding drive causes foreign config. Internal backplane server only.
 LSID100131244(DFCT)PDs get associated with enclosure 0xff until comminication w/ SEP restored
 LSID100131243(DFCT)Battery missing POST message has incorrect formatting
 LSID100126709(DFCT)AF B2 H800 goes to megamon due to pincache issue
 LSID100126040(DFCT)sbbm table is not imported from SWR to HWR controller
 LSID100126826(DFCT)FDE changes to make it TCG compliant
 LSID100131000(DFCT)Amicalola Falls FW writes invalid inquiry data.

BIOS:
  LSID100124231(CO)CR_Ref# LSID100100879: Host Memory Allocation for MR Skinny_HWR_SAS_Bios
  LSID100124442(DFCT)Add function header and comment
  LSID100124619(DFCT)In specific systems can’t boot to OS on the VD or on the secondary controller with FW pkg 20.1.1-0016
  LSID100124579(DFCT)System hang is seen when user by-pass BIOS
  LSID100124571(DFCT)System hang is seen if BIOS fails to bring up skinny FW
  LSID100125109(DFCT)can not install Sles 11 64 bit on some systems with skinny controller in the system.
  LSID100125319(DFCT)FW breaks into montask while you try to create file system on 5 drive R5 on SLES 11 64 Bit system
  LSID100125321(DFCT)System Kernel panics or reboots if you pull out a drive form R1 VD.
  LSID100125856(DFCT)Allocate mem only if hostMemRequired is set
  LSID100131196(DFCT)The Mercury 2108 controller returned string(OPROM PnP header) does not return the cntrl name
  LSID100131637(DFCT)Remove Ctrl E which is used to skip OpROM Execution
  LSID100131650(DFCT)Product name gets truncated when its length is >25

WebBIOS:
 LSID100126734(CO)Auto Generated from PR LSIP200011162 
 LSID100131159(DFCT)Unable to read White text on Gray background in uEFI WB 
 LSID100126661(DFCT)System hang with multiple controllers
 LSID100126622(DFCT)In EFI Webbios some of the buttons are out of range on VD property window
 LSID100131254(DFCT)SS-WB:-System PD is taken count when creating array using auto configuration
 LSID100126339(DFCT)EFI WebBIOS shows blank grey screen when selecting 2nd adapter each time EFI WebBIOS is
                    launched


Installation:
=============
Use MegaCLI to flash the SAS controllers.  The DOS version of MegaCLI is included
in the zip file.  Windows and Linux MegaCLI can be downloaded from the download
section of www.megaraid.com.

Command syntax:  MegaCli -adpfwflash -f AF2108_FW_Image.rom -a0