DACPL UPGRADE Notes Readme.txt - This file dac960fl.exe - DOS program for firmware upgrade fwplmlml.3.50 - binary file contains the firmware code These release files of firmware version 3.50-0-5,(BIOS version 3.00-07 is embedded ) are supported on models DACPL only. ** WARNING : IT IS ALWAYS RECOMMENDED TO BACKUP YOUR DATA BEFORE ANY UPGRADE IS PERFORMED, UNEXPECTED LOSS OF DATA IS POSSIBLE This firmware code is for DACPL-MY4 models ( has 2 EEPROM chips) controller ONLY. DO NOT USE on models DACP, DAC-PD, DACPU or in any OEM version of the controllers. Flashing the wrong firmware binary file will prevent the controller from functioning and will require to return the controller to the factory for repair. This flash utilities will not work with -MY3 models controller. A -MY3 controller has version 2.x firmware with only 1 EEPROM chip. ** UPGRADE procedure : Upgrade the firmware using the firmware flash utility DAC960FL.EXE and appropriate firmware file under DOS. Make sure clean boot DOS from floppy disk ( not inside Win95/NT DOS Windows ) and run the upgrade program from diskette. A> DAC960FL FWPLMLML.350 firmware and BIOS are programmed at the same timeDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.