DACPDU(same as DACPU) / DACPD / DACP UPGRADE Notes 12-23-1998 Readme.txt - This file dac960fl.exe - DOS program for firmware upgrade fwpu3522.ima - binary file contains the firmware code rel352-2.doc - Release notes for DAC960P, PD, and PDU w/ FW 3.52-0-2 These release files for firmware version 3.52-0-2 are supported on models DACPDU(same as DACPU) / DACPD / DACP only. NOTE!!! When upgrading an existing or new DAC960 controller with this FW and Bios, the DAC960 will require XBDA(the Extended BIOS Data Area) support in the system BIOS. (For more info. on XBDA support, please visit our FAQ site on our homepage.)If your motherboard BIOS does not support XBDA, the DAC960 will disable it's own BIOS and indicate this with an error message. You must contact your system or bios board manufacturer to make sure this function is supported of your current bios, and if available, then upgrade your system board bios. If unavailable, and you have already flashed to the new firmware/bios, you can flash back to your original firmware/bios which will be downloadable from our website. ** WARNING : IT IS ALWAYS RECOMMENDED TO BACKUP YOUR DATA BEFORE ANY UPGRADE IS PERFORMED, UNEXPECTED LOSS OF DATA IS POSSIBLE This firmware code is for DACPU / DACPD / DACP-MY4 models ( has 2 EEPROM chips) controller ONLY. DO NOT USE on model DAC-PL or in any OEM version of the controllers. Flashing the wrong firmware binary file will prevent the controller from functioning and will require a return of the controller back to the factory for repair. These flash utilities will not work with -MY3 model controllers. A -MY3 controller has version 2.x firmware and with only 1 EEPROM chip. ** UPGRADE procedure : Upgrade the firmware using the firmware flash utility DAC960FL.EXE and appropriate firmware file under DOS. Make sure to clean boot to DOS from floppy disk ( not inside Win95/NT DOS Windows prompt ) and run the upgrade program from these two files on the diskette. A> DAC960FL fwpu3522.ima firmware and BIOS are programmed at the same timeDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.