Mylex
Software Kit 1.03
September 18, 1995
This diskette contains drivers and utilities for the following operating
systems:
Novell Netware 3.x
Novell Netware 4.x
Microsoft Windows NT 3.5
OS/2 2.11 and Warp 3.0
Utilities for UnixWare 2.x
There is a second diskette included with Software Kit 1.03 that contains
the drivers and utilities for SCO Unix 3.2.4.2 (ODT 3.0). The drivers and utilities
are version 3.03. The file README.SCO in the root directory of this diskette contains
last minute information regarding the SCO drivers and utilities.
There is a third diskette that contains drivers and utilities for SCO OpenServer 5.0. This
is Version 4.0 of the SCO OpenServer Drivers and Utilities diskette. Instructions on its
use are included in the DAC960 Software Kit Manual. Last minute changes and instructions
are included in the README.SCO file in the root directory of this diskette.
The following Netware 3.x files are in the \NW_3X subdirectory:
FILENAME SIZE DATE VERSION DESCRIPTION
README.NW3 : 9/18/95 This file contains general
information about this release.
DAC960.DSK : 13381 9/6/95 3.08 DAC960 driver for Netware 3.1X.
ASPIDAC3.DSK: 4385 8/31/95 3.04 DAC960 ASPI driver for Netware 3.1X.
DACADM.NLM : 148461 5/5/95 3.05 DAC960 administration utility for
Netware 3.1X.
DACMON.NLM: 65521 5/5/95 3.07 DAC960 monitoring utility for
Netware 3.1X.
DACBRDGE.NLM 1159 9/28/94 1.00 Bridge utility to support Red Alert
notification software
The following Netware 4.x files are in the \NW_4X subdirectory:
FILENAME SIZE DATE VERSION DESCRIPTION
README.NW4 : 9/18/95 Information file about Netware Drivers and Utilities.
DACNET4.DSK : 13354 9/6/95 3.08 DAC960 driver for Netware 4.X.
ASPIDAC4.DSK: 4835 8/31/95 3.02 DAC960 ASPI driver for Netware 4.X
Auto-loads CLIB.NLM
ASPIDAC4.DDI: 632 10/29/94 1.00 Auxiliary file used by Aspidac.dsk
DACADM.NLM : 148461 5/5/95 3.05 DAC960 administration utility for
Netware
DACMON.NLM: 65521 5/5/95 3.07 DAC960 monitoring utility for Netware
DACNET4.DDI: 1046 12/13/94 1.00 DAC960 information file used by
Netware during installation.
DACBRDGE.NLM 1159 9/28/94 1.00 Bridge utility to support Red Alert
notification software
The follwing NT 3.51 files are in the NT_35 subdirectory:
FILENAME SIZE DATE VERSION DESCRIPTION
README.WNT 9/18/95 Information file about Windows NT 3.51 drivers
and Utilities.
DAC960NT.SYS 9680 7/13/95 3.05 The main driver file for Windows NT 3.51 only. DO
NOT USE TO UPGRADE WINDOWS NT 3.5.
DACMON.EXE 38912 12/13/94 3.01 The DAC960 monitor utility for
monitoring the DAC960's Activity.
DACADM.EXE 57856 12/13/94 3.01 The DAC960 administration utility.
OEMSETUP.INF 18496 9/25/95 3.05 This file is required for adding
additional DAC960's on a system
The following NT 3.51 files are in the \NT_35\NEWUTILS subdirectory:
DACMON.EXE 42496 6/1/95 3.05 New monitoring utility for NT 3.51 (must be loaded
using srvccfg.exe)
SRVCCFG.EXE 18432 6/1/95 3.05 Service routine to load utilities
The following OS/2 files are in the OS2_2X subdirectory:
FILENAME SIZE DATE VERSION DESCRIPTION
README.OS2: Information file about OS/2 drivers and utilities.
DAC960.ADD: 14830 4/19/95 3.07 The DAC960 Driver for OS/2 2.x
DACADM.EXE: 97792 3/16/95 3.03 The administration utility for the
DAC960 controller
DAC960.DDP 450 1/20/95 1.00 Adapter Device Driver Profile used
by the OS/2 driver
DACADM.HLP: 6667 9/16/94 The DAC960 administration utility
help file.
The Compressed UnixWare 2.x Utilities are in the UW_2x subdirectory
FILENAME SIZE DATE VERSION DESCRIPTION
UX20TK.Z 149551 5/16/95 3.05 The compressed utilities for
UnixWare 2.x. (The drivers are
shipped by Novell)
README.1ST Instructions for installing the utilities.
The drivers and utilities on this diskette have been developed for and
have been tested with the following products:
|-----------|------------|----------|---------|---------|---------|---------|---------|
|Driver | DAC960-1/2 | DAC960-3 | DAC960-5| DAC960E | DAC960P | DAC960M | DAC960S |
| | | | | | DAC960PL| | DAC960SI|
| | | | | | DAC960PD| | |
|-----------|------------|----------|---------|---------|---------|---------|---------|
|NetWare 3x | X | X | X | X | X | | X |
| | | | | | | | |
|NetWare 4x | X | X | X | X | X | | X |
| | | | | | | | |
|OS/2 2.x | X | X | X | X | X | X | |
|WARP 3.0 | | | | | | | |
| | | | | | | | |
|Windows NT | X | X | X | X | X | | |
| 3.51 | | | | | | | |
|SCO UNIX | X | X | X | X | X | X | |
| 3.2.4.2 | | | | | | | |
|SCO OpenSrv| X | X | X | X | X | X | |
| 5.x | | | | | | | |
|-----------|------------|----------|---------|---------|---------|---------|---------|
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.