1. Entrega_USB2Ethernet.exe Driver
2. Setup32_Chinese(PRC).ini File Contents

Setup32_Chinese(PRC).ini Driver File Contents (Entrega_USB2Ethernet.exe)

;///////////////////////////////////////////////////////////////////////////////
;
;Date: 16 December 1999
;
;This Setup file is for the USB Ethernet under NT4.  It currently supports
;  the UDS9 and USPP products, and of course the hubs.
;This is the Diskette version used by MAKEDISK.BAT
;
;It is strongly recommended that the contents of this file do NOT get modified.
;
;NOTE:  IF MODIFYING THIS FILE, SECTIONS [ManFileCopy], [LaunchNow],
;       and [LaunchOnceAfterReboot] CAN NOT HAVE ANY COMMENT LINES IN THEM.
;
;Copyright (c) 1998-1999, Xircom Inc. All rights reserved.
;
;////////////////////////////////////////////////////////////////////////////////                                       

[Version]
FileVersion     = 1.00
ForbidOS        = 95|95R2|98|NT5
ForbidOSMessage = ÕâÖ»ÄܱØÐëÔÚWindows NT 4ÔËÐÐSETUP.EXE under Windows NT 4.  Òª°²×°ÄãµÄ Xircom USB É豸, ºÜ¼òµ¥µÄ²åÈëËüÃÇ£¬È»ºóWindows »áÐèÒªÇý¶¯³ÌÐòÅÌ¡£ÔÚ´ËCDÉÏä¯ÀÀĿ¼ѰÕÒÄãµÄWindows °æ±¾(Win95 »ò Win98) £¬È»ºóµ¥»÷¡°È·¶¨¡±¡£×ñÑ­ÆÁÄ»ÉϵÄÖ¸µ¼£¬Íê³É°²×°¡£

[Strings]
Title           = Xircom USB Ethernet
WelcomeString   = »¶Ó­½øÈëXircom USB Ethernet °²×°³ÌÐò¡£´Ë³ÌÐò½«¸´ÖÆÓ¦ÓóÌÐòµ½ÄãµÄ¼ÆËã»úÀï¡£\n\n°²×°½¨ÒéÄãÔÚ°²×°Ç°Í˳öËùÓÐÕýÔÚʹÓÃµÄ Windows Ó¦ÓóÌÐò¡£\n\nÒªÏÖÔÚÍ˳ö°²×°£¬µ¥»÷¡°È¡Ïû¡±¡£ \nÒª¼ÌÐø°²×°£¬Çëµ¥»÷¡°ÏÂÒ»²½¡±¡£
CopyRight       = °æȨËùÓÐ (c) 1998-1999, Xircom ÓÐÏÞ¹«Ë¾¡£   ±£ÁôËùÓÐȨÀû¡£
AdvMessage      = ¸ÐлÄãÑ¡ÔñXircom²úÆ·.


[ManFileCopy]
Disk_1,NT4|NT4SX,0,Common\usbhub.sys,%WINDOWS%\system32\drivers\usbhub.sys,SHARED
Disk_1,NT4|NT4SX,0,Common\usbd.sys,%WINDOWS%\system32\drivers\usbd.sys,SHARED
Disk_1,NT4|NT4SX,0,Common\usbeth.sys,%WINDOWS%\system32\drivers\usbeth.sys,SHARED
Disk_1,NT4|NT4SX,0,Common\usbenet.sys,%WINDOWS%\system32\drivers\usbenet.sys,SHARED
Disk_1,NT4|NT4SX,0,Common\apuninst.exe,%WINDOWS%\apuninst.exe,UnInstall Xircom USB Ethernet
Disk_1,NT4|NT4SX,0,Common\Ures_Chi.dll,%WINDOWS%\Ures_Chi.dll,SHARED

[Parameters]
ProductDir              = USB
UnInstallFile           = APUNINST.EXE
CreateFolder            = TRUE
FolderName              = Xircom USB Ethernet
Disk1                   = Xircom USB EthernetµÄ°²×°Èí¼þÅÌ
TotalBytes              = 442688
OverAllProgBarColor     = BLUE 
IndivProgBarColor       = PURPLE

[LaunchNow]

[LaunchOnceAfterReboot]

[PromptUser]
MessageBox      = 
FileName        = 
RebootFlag      = YES
RebootUnderOS   = ALL
RebootMessage   = ±ÜÃâ¸Ä±äµÄÓ°Ï죬Äã±ØÐèÖØÐÂÆô¶¯ÄãµÄϵͳ¡£  ÄãÒªÏÖÔÚÖØÐÂÆô¶¯Âð?
 
[AddReg]
NT4|NT4SX,HKLM\SYSTEM\CurrentControlSet\Services\Usbd
 DWORD,ErrorControl,1
 STRING,Group,Base
 DWORD,Start,2
 DWORD,Type,1

NT4|NT4SX,HKLM\SYSTEM\CurrentControlSet\Services\UsbEth
 DWORD,ErrorControl,1
 STRING,Group,Base
 DWORD,Start,3
 DWORD,Type,1
 STRING,Family,xirport

NT4|NT4SX,HKLM\SYSTEM\CurrentControlSet\Services\UsbHub
 STRING_MULTI,DependOnService,Usbd
 DWORD,ErrorControl,1
 STRING,Group,Base
 DWORD,Start,2
 DWORD,Type,1
 STRING,VID047E_PID1001,xirptr
 STRING,VID085A_PID0001,XirSer
 STRING,VID085A_PID0003,xirptr
 STRING,VID085A_PID0008,UsbEth
 STRING,VID085A_PID0009,UsbEth
 STRING,VID085A_PID0011,XirSer
 STRING,VID085A_PID0013,xirptr
 STRING,VID085A_PID0018,UsbEth
 STRING,VID085A_PID0019,UsbEth
 STRING,VID1645_PID0005,UsbEth
 STRING,VID1608_PID0001,edgeser
 STRING,VID1608_PID0003,edgeser
 STRING,VID1608_PID0004,edgeser
 STRING,VID1608_PID0005,edgeser
 STRING,VID1608_PID0006,edgeser
 STRING,VID1608_PID0007,edgeser
 STRING,VID1608_PID000B,ionptr
 STRING,VID1608_PID000C,edgeser
 STRING,VID1608_PID000D,edgeser
 STRING,VID1608_PID000E,edgeser
 STRING,VID1608_PID0401,edgeser
 STRING,VID1608_PID0403,edgeser
 STRING,VID1608_PID0404,edgeser
 STRING,VID1608_PID0405,edgeser
 STRING,VID1608_PID0406,edgeser
 STRING,VID1608_PID0407,edgeser
 STRING,VID1608_PID040B,ionptr
 STRING,VID1608_PID040C,edgeser
 STRING,VID1608_PID040D,edgeser
 STRING,VID1608_PID040E,edgeser
 STRING,VID1608_PID0801,edgeser
 STRING,VID1608_PID0803,edgeser
 STRING,VID1608_PID0804,edgeser
 STRING,VID1608_PID0805,edgeser
 STRING,VID1608_PID0806,edgeser
 STRING,VID1608_PID0807,edgeser
 STRING,VID1608_PID080B,ionptr
 STRING,VID1608_PID080C,edgeser
 STRING,VID1608_PID080D,edgeser
 STRING,VID1608_PID080E,edgeser
 STRING,VID1608_PID1403,edgeser

NT4|NT4SX,HKLM\SYSTEM\CurrentControlSet\Services\xirusb
 DWORD,ErrorControl,1
 STRING,Group,Base
 DWORD,Start,2
 DWORD,Type,10
 STRING,Family,xirport
; STRING_EXPAND,ImagePath,%SystemRoot%\system32\xirusb.exe
; STRING,DisplayName,Xircom USB
 
NT4|NT4SX,HKCR\AppID\{9D686E95-133F-11D3-BCEC-00105AA7429A}

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.