;[3DSetting]
[3DSetting]
IDS_3DSETTING_TITLE = "3D Setting"
IDC_STATIC_MAXANI = "Adjust the accepted maximum anisotropy"
IDS_PAGE_STEREO = "3D Stereo"
IDS_PAGE_SEE_THROGH = "Eagle-Eye"
IDS_PAGE_FSAA = "FSAA"
IDS_PAGE_OVERCLOCK = "OverClock"
IDS_PAGE_MISC = "Misc"
IDS_STEREO_ADVANCE_PAGE = "Stereo advanced setting"
IDS_PAGE_D3D = "D3D"
IDS_PAGE_OpenGL = "OpenGL"
IDS_PAGE_MISC1 = "Xmart"
IDS_STEREO_STEREO_ENABLE = "Enable Stereo"
IDS_STEREO_GLASSES_TYPE = "Stereo Glasses Type"
IDS_STEREO_SHUTTLE_WIRE = "Shuttle class stereo (Wire)"
IDS_STEREO_SHUTTLE_WIRELESS = "Shuttle class stereo (Wireless)"
IDS_STEREO_REDBLUE = "Red-blue class stereo"
IDS_STDADV_STEREO_REFRESH = "Enable stereo refresh rate setting"
IDS_STDADV_STEREO_DISP = "Display Modes"
IDS_STDADV_STEREO_REFRESHRATE = "Associated refresh rate"
IDS_STDADV_STEREO_REFRESH_WARNING = "The refresh rate will be used when the function is enabled in stereo mode. Turning on the function will increase stereo effect. Please match a refresh rate for specified display mode. If you replace the monitor, please reset the value."
IDS_PAGE_3DGAMMA = "3D color correction"
IDC_SLIDER_3DCOLORENHANCE = "Adjust color enhancement for the best quality of 3D applications."
IDS_PAGE_3DPAGE = "3D"
IDS_STATIC_ANISOTROPY = "Max Anisotropy"
IDS_STATIC_MAXANIVALUE = "Maximum:"
IDS_GAMMA_RAMDAC1 = "Primary"
IDS_GAMMA_RAMDAC2 = "Secondary"
IDC_STATIC_ANISOTROPY = "Max Anisotropy"
IDC_RADIO_D3D_FSAA_ON = "Define if the function of Full Scene Anti-Alias is executed or not."
IDC_RADIO_D3D_FSAA_OFF = "Decide FSAA based on the executed 3D application."
IDC_RADIO_D3D_MAXANI_ON = "Enable "
IDC_RADIO_D3D_MAXANI_OFF = "Decide Max Anisotropy based on the executed 3D application."
IDS_ENABLE = "Enable "
IDS_DEPAP = "Depend on AP"
IDS_OC_WARMING = "Overclocking your VGA card may cause instability of your system. Please restart your system if any abnormal operation occurs. " Are you sure you want to overclock your VGA card?" Note: once you reboot your system, your VGA card will return to its normal operating frequency."
IDC_RADIO_3DRGB_ON = "Enable "
IDC_RADIO_3DRGB_OFF = "Decide the method of color correction based on the executed 3D application."
IDS_RADIO_3DRGB_ON = "Enable "
IDS_RADIO_3DRGB_OFF = "Depend on AP"
IDS_SEETHRU_SEE_THROUGH = "Enable Eagle-Eye"
IDS_SEETHRU_TRANSPARENCY = "Transparency"
IDS_SEETHRU_WIREFRAME = "Wireframe"
IDS_ALL_ITEM = "Item"
IDS_ALL_SUPPORT_GAME = " Game Supported List"
IDS_ALL_ADVANCE = "Advance"
IDS_ALL_DEFAULT = "Default"
IDS_ALL_OK = "OK"
IDS_ALL_CANCLE = "Cancle"
IDS_ALL_TEST = "Test"
IDS_FSAA340_ENABLE = "Enable Full Scene Anti-Alias"
IDS_FSAA340_PERFORMANCE = "Performance"
IDS_FSAA340_QUALITY = "Quality"
IDS_MISC_USE_HWTNL = "Use Hardware TnL"
IDS_MISC_USE_SWTNL = "Use Software TnL"
IDS_OC_MCLK = "Memory Clock"
IDS_OC_ECLK = "Engine Clock"
IDS_OC_OVER_DRIVE = "Enable OverDrive"
IDS_OC_LOCK_CLOCK = "Synchronize frequency tuning"
IDS_MESSAGE_REINSTALL = "The system is damaged, please reinstall this package!"
IDS_MESSAGE_OCWARNING = "Make sure to turn off 3D Stereo/Eagle-Eye/FSAA before Test. Please wait a moment! Modifying your videocard may destroy it and void any warranties. We take no responsibility of any damage caused."
IDS_MESSAGE_OCTEST_OK = "Test ok!"
IDS_MESSAGE_OCTEST_FAIL = "Test fail! It will be reset to BIOS default value!"
IDS_D3D_PQ = "Performance vs. Quality"
IDS_D3D_PERFORMANCE = "Performance"
IDS_D3D_QUALITY = "Quality"
IDS_D3D_FSAA = "Full Scene Anti-Alias"
IDS_D3D_FSAA_ENABLE = "Enable Full Scene Anti-Alias"
IDS_D3D_FSAASET = "FSAA Settings:"
IDS_D3D_VS = "Vertical Synchronization"
IDS_D3D_VS_DEPAP = "Depend on AP"
IDS_D3D_VS_OFF = "Always Off"
IDS_OPENGL_PQ = "Performance vs. Quality"
IDS_OPENGL_PERFORMANCE = "Performance"
IDS_OPENGL_QUALITY = "Quality"
IDS_OPENGL_FSAA = "Full Scene Anti-Alias"
IDS_OPENGL_FSAA_ENABLE = "Enable Full Scene Anti-Alias"
IDS_OPENGL_VS = "Vertical Synchronization"
IDS_OPENGL_VS_DEPAP = "Depend on AP"
IDS_OPENGL_VS_OFF = "Always Off"
IDS_OPENGL_ZBDEPTH = "Z-Buffer Depth"
IDS_OPENGL_ZB_DEPAP = "Depend on AP"
IDS_OPENGL_ZB_16B = "Force 16-bit"
IDS_MISC1_SM_ENABLE = "Enable "
IDS_MISC1_SM_BRILEVEL = "Brightness Level:"
IDS_MISC1_SMARTDRIVE_ENABLE = "Enable "
IDC_STATIC_STEREO_REFRESHRATE = "Set refresh rate."
IDC_STATIC_VS = "Vertical Synchronization defines the method applied on image refreshment. The recommended method is to refresh images as display is on vertical retrace."
IDC_RADIO_D3D_VS_DEPAP = "Decide the method of Vertical Synchronization based on the executed 3D application."
IDC_RADIO_D3D_VS_OFF = "If the setting is Always Off, new image shows immediately without waiting for the vertical retrace of display. The efficiency of image refreshment is improved but the stability of performance may be affected."
IDC_STATIC_OPENGL_PERFORMANCE = "If highly executed performance is required, please scroll the bar to Performance."
IDC_STATIC_OPENGL_QUALITY = "If high image quality is required, please scroll the bar to Quality."
IDC_STATIC_D3D_PERFORMANCE = "If highly executed performance is required, please scroll the bar to Performance."
IDC_STATIC_D3D_QUALITY = "If high image quality is required, please scroll the bar to Quality."
IDC_STATIC_OPENGL_PQ = "Decide the trade-off between performance and quality based on the CPU speed and personal preference."
IDC_STATIC_OPENGL_FSAA = "The Full Scene Anti-Alias smoothes image boundary and provides better image quality."
IDC_STATIC_OPENGL_FSAASET = "Adjust the image quality by assigning the number of sample used on Full Scene Anti-Alias calculation."
IDC_CHECK_OPENGL_FSAA = "Define if the function of Full Scene Anti-Alias is executed or not."
IDC_STATIC_OENGL_VS = "Vertical Synchronization defines the method applied on image refreshment. The recommended method is to refresh images as display is on vertical retrace."
IDC_RADIO_OPENGL_VS_DEPAP = "Decide the method of Vertical Synchronization based on the executed 3D application."
IDC_BUTTON_APPLY = "Save all changes without closing current dialog."
IDS_OPENGL_FSAASET = "FSAA Settings:"
IDC_RADIO_OPENGL_VS_OFF = "If the setting is Always Off, new image shows immediately without waiting for the vertical retrace of display. The efficiency of image refreshment is improved but the stability of performance may be affected."
IDC_STATIC_OPENGL_ZBDEPTH = "Z-Buffer Depth represents the accuracy of z value of image pixel."
IDC_RADIO_OPENGL_ZB_DEPAP = "Determine the Z-Buffer Depth based on the executed 3D application."
IDC_RADIO_OPENGL_ZB_16B = "Restrict the executed 3D application to 16-bit Z-Buffer Depth."
IDC_STATIC_SM = "Intelli-Vision provides user-defined brightness level of 3D application."
IDC_CHECK_SM = "Define if Intelli-Vision is executed or not."
IDC_STATIC_SM_BRILEVEL = "The brightness is divided into 3 levels. The larger the value is, the brighter it is."
IDC_STATIC_SMARTDRIVE = "V-Drive increases the electric voltage to improve the overclocking stability."
IDC_CHECK_SMARTDRIVE = "Define if V-Drive is executed or not."
IDC_BUTTON_HWDOCTOR = "Provide the information associated with electric voltage, GPU temperature and its fan speed on VGA card."
IDC_BUTTON_ADVANCE = "Provide the advanced settings of 3D Stereo."
IDC_RADIO_STEREO_ENABLE = "Define if the function of 3D Stereo is executed or not."
IDC_STATIC_GLASSES_TYPE = "As 3D Stereo is applied, define the Stereo Glasses Type right here."
IDC_RADIO_SHUTTLE_WIRE = "Assign the Stereo Glasses Type as Shuttle class stereo (Wire)."
IDC_RADIO_SHUTTLE_WIRELESS = "Assign the Stereo Glasses Type as Shuttle class stereo (Wireless)."
IDC_RADIO_REDBLUE = "Assign the Stereo Glasses Type as Red-blue class stereo."
IDC_BUTTON_DEFAULT = "Restore initial values."
IDC_LIST_TESTED_GAME = "Stereo-supported Game List."
IDC_BUTTON_RESET = "Restore initial values."
IDC_STATIC_MCLK = "Memory clock on VGA card."
IDC_STATIC_ECLK = "GPU engine clock."
IDC_MCLK_PICTURE = "Use the right-hand scroll bar to adjust the memory clock. As the image background is blue, it means the memory clock is lower. Green means the memory clock is near the default value. Red means the memory clock is higher than standards."
IDC_ECLK_PICTURE = "Use the right-hand scroll bar to adjust GPU engine clock. As the image background is blue, it means the engine clock is lower. Green means the engine clock is near the default value. Red means the engine clock is higher than standards."
IDC_CHECK_LOCK_CLOCK = "As the item is checked, synchronize the memory clock and GPU engine clock."
IDC_STATIC_D3D_PQ = "Decide the trade-off between performance and quality based on the CPU speed and personal preference."
IDC_CHECK_STEREO_REFRESH = "Define if the settings of Display Modes and Refresh Rate are applied."
IDC_STATIC_D3D_FSAA = "The Full Scene Anti-Alias smoothes image boundary and provides better image quality."
IDC_STATIC_STEREO_DISP = "Define the Display Mode."
IDC_CHECK_D3D_FSAA = "Define if the function of Full Scene Anti-Alias is executed or not."
IDC_STATIC_D3D_FSAASET = "Adjust the image quality by assigning the number of sample used on Full Scene Anti-Alias calculation."
IDC_STATIC_3DGAMMA_DEMO = "The picture shows the adjusted effect after color correction."
IDC_STATIC_3DGAMMA_CURVE = "Enhanced ratio curve of Gamma Ramp"
IDC_SLIDER_3DGAMMA_RGB = "Adjust the enhanced ratio of full-screen Gamma Ramp based on the red, green or blue channel."
IDOK = "Save all changes and also close current dialog."
IDCANCEL = "Close current dialog without saving any changes."
;[AGPDriverTest]
[AGPDriverTest]
IDS_STRING_DETAIL_SIMPLE = "Detail >>"
IDS_STRING_DETAIL_EXTEND = "<< Detail"
IDS_STRING_OK = "Close"
IDS_STRING_AGPACT = "AGP GART Driver is active."
IDS_STRING_AGPNACT = "AGP GART Driver is not active"
IDS_STRING_DLGTITLE = "XGI AGP GART Driver Detector"
IDS_STRING_AGPSIZENENOUGH = "The AGP Aperture size must be not less than 128MB."
IDS_STRING_AGPSIZEENOUGH = "The AGP Aperture size must be not less than 128MB."
;[AGPInformation]
[AGPInformation]
IDS_PAGE_TITLE = "AGP Information"
IDS_OK = "Close"
IDS_AGP_TRANSFER_RATE = "Current Speed"
IDS_MAINBOARD = "MB:"
IDS_GRAPHIC = "VGA Card:"
IDS_AGP_ACTIVE = "AGP GART Driver is active"
IDS_AGP_NOT_ACTIVE = "AGP GART Driver is not active"
IDS_HARDWARE_SUPPORT = "Hardware Support"
;[DesktopManager]
[DesktopManager]
IDS_ABOUTBOX = "Information about DesktopPlus"
IDS_DESKTOP = "Desktop Manager"
IDS_DISPLAY = "Display Settings"
IDS_MINIWINDOW = "General Settings"
IDS_PROGRAM = "Program Manager"
IDS_BUTTON_CLOSE = "Close"
IDS_MENUITEM_PROPERTY = "Property Page"
IDS_MENUITEM_SWITCHDESKTOP = "Desktop Switch"
IDS_MENUITEM_SHOWMINIWND = "Show Mini-Window"
IDS_MENUITEM_SHOWDESKTOPNAME = "Show Desktop Name"
IDS_MENUITEM_TRAYICON = "Show Desktop Tray Icon"
IDS_MENUITEM_ABOUT = "About"
IDS_MENUITEM_EXIT = "Exit"
IDS_GROUP_ADDDELETEDESKTOP = "Add and Delete Desktop"
IDS_STATIC_DESKTOPNAME = "Desktop Name"
IDS_STATIC_WALLPAPERNAME = "Wallpaper"
IDS_BUTTON_BROWSEWALLPAPER = "Browse"
IDS_STATIC_WALLPAPERSTYLE = "Wallpaper Style"
IDS_COMBO_WALLPAPERSTYLE1 = "Center"
IDS_COMBO_WALLPAPERSTYLE2 = "Tile"
IDS_COMBO_WALLPAPERSTYLE3 = "Stretch"
IDS_CHECK_USESHORTCUT = "Use current desktop shortcut"
IDS_BUTTON_ADDDESKTOP = "Add New"
IDS_BUTTON_DELETEDESKTOP = "Delete"
IDS_COMBO_PROGITEM1 = "Shortcut Manager"
IDS_COMBO_PROGITEM2 = "Application Manager"
IDS_STATIC_PROGLIST1 = "Shortcut List "
IDS_STATIC_PROGLIST2 = "Application List"
IDS_BUTTON_ADDPROG = "Add in"
IDS_BUTTON_STICKPROG = "Stick"
IDS_BUTTON_REMOVEPROG = "Remove"
IDS_STATIC_DESKTOPLIST = "Desktop List"
IDS_STATIC_HINT = "Hint"
IDS_EDIT_HINT1 = "You have selected a ShortCut. You can choose the Desktop you want to add this shortcut in Desktop List and click Add or Stick button. Stick button will add this shortcut to every desktop. "
IDS_EDIT_HINT2 = "You have selected a Desktop. You can choose the ShortCut you want to add to this desktop in ShoruCut List and click Add or Stick button. Stick button will add this shortcut to every desktop. "
IDS_EDIT_HINT3 = "You have selected a ShortCut. You can click Remove button to remove the ShortCut you selected from this desktop. "
IDS_EDIT_HINT4 = "You have selected an Application. You can choose the Desktop you want to add this application in Desktop List and click Add or Stick button. Stick button will add this application to every desktop."
IDS_EDIT_HINT5 = "You have selected a Desktop. You can choose the Application you want to add to this desktop in Application List and click Add or Stick button. Stick button will add this application to every desktop."
IDS_EDIT_HINT6 = "You have selected a Application. You can click Remove button to remove the application you selected from this desktop. "
IDS_LISTITEM_DRVMODE = "Display Mode Settings"
IDS_LISTITEM_GAMMA = "Desktop Gamma Correction"
IDS_LISTITEM_VIDEO = "Video Setting"
IDS_GROUP_MINIWINDOWSETTING = "Mini-Window Setting"
IDS_CHECK_SHOWMINIWINDOW = "Show Mini-Window"
IDS_GROUP_SWITCHACTION = "Action on Switching"
IDS_CHECK_SHOWDESKTOPNAME = "Show desktop name after switching"
IDS_GROUP_HOTKEYDEFINE = "Hotkey"
IDS_BUTTON_HOTKEYDEFINE = "Define Hotkey"
IDS_MESSAGE_DESKTOP1 = "Cannot create more than 9 Desktops."
IDS_MESSAGE_DESKTOP2 = "Please Enter Desktop Name."
IDS_MESSAGE_DESKTOP3 = "Please Enter Different Desktop Name."
IDS_STATIC_ALLUSERSHORTCUT = "All users' shortcuts shown on every desktops"
;[DisplayMode]
[DisplayMode]
IDS_DRVMODE_MSG_RESTORESETTING = "Windows has restored your original display settings."
IDS_DRVMODE_MSG_RESTART = "You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?"
IDS_DRVMODE_MSG_MACROVISION = "Copy protect, not allowed to change to TV."
IDS_DRVMODE_GROUP_DRIVERMODE = "Display Mode"
IDS_DRVMODE_GROUP_SUPPORTMODES = "Support Modes"
IDS_DRVMODE_DISPB_POWER = "Power on"
IDS_DRVMODE_RESENSE = "Display devices detection"
IDS_DRVMODE_DISPA = "Primary"
IDS_DRVMODE_DISPB = "Secondary"
IDS_OK = "OK"
IDS_CANCEL = "Cancel"
IDS_DRVMODE_LCDEXPANSION = "Turn on LCD Expansion"
IDS_SUPPORTVIRTUALSCREEN = "Virtual Screen"
IDS_FIXEDFR_FORMAT_RESOLUTION = "%d by %d(%d by %d) pixels"
IDS_DRVMODE_PAGETITLE = "Display Mode Setting"
IDS_DRVMODE_BPP4 = "16 Colors"
IDS_DRVMODE_BPP8 = "256 Colors"
IDS_DRVMODE_BPP16 = "High Color (16 bit)"
IDS_DRVMODE_BPP32 = "True Color (32 bit)"
IDS_DRVMODE_FORMAT_RESOLUTION = "%d by %d pixels"
IDS_DRVMODE_FRDEFAULT = "Default"
IDS_DRVMODE_FROPTIMAL = "Optimal"
IDS_DRVMODE_MSG_CDSFAIL = "Windows cannot implement your new display settings. Click OK, and then choose different settings."
IDS_DRVMODE_MSG_CHANGESETTING = "Windows will now adjust your display settings. This will take a few seconds, during which your screen may flicker. If the windows does reappear correctly, wait 15 seconds, and your original setting will be restored."
IDS_DRVMODE_MSG_CONFIRMSETTING = "Windows has changed your display settings. Do you want to keep the new settings?"
IDC_COMBO_DISPA_DEVICE = "Select the primary display device type (VGA,LCD,TV)."
IDC_COMBO_DISPB_DEVICE = "Select the secondary display device type (VGA,LCD,TV)."
IDC_CHECK_DISPB_POWER = "Power on the secondary device."
IDC_BUTTON_RESENSE = "If the display device listbox does not show all connected devices, click here to detect connected display devices again."
IDC_COMBO_DISPA_MODES = "List modes supported by the primary display device, such as resolution, color-depth and refresh-rate combination."
IDC_COMBO_DISPB_MODES = "List modes supported by the secondary display device, such as resolution, color-depth and refresh-rate combination."
IDC_BUTTON_MODE = "If you have two or more display devices, you can choose either Mirror or Multimonitor mode. In mirror mode, the display of the two devices is the same. Multimonitor mode enlarges your desktop work area."
IDS_REFRESHRATETITLE = "Refresh Rate"
IDS_DRIVERMODEPPTITLE = "Display Mode"
IDS_FIXEDFR_CHECK_ENABLEFIXEDREFRESHRATE = "Lock refresh rate"
IDS_FIXEDFR_STATIC_DESCRIPTION = "Select the desired refresh rate for the specific display mode."
IDS_FIXEDFR_BUTTON_INSERTSELECTED = "Insert"
IDS_FIXEDFR_BUTTON_DELETEMODE = "Remove"
IDS_FIXEDFR_TABTITLE1 = "Display mode"
IDS_FIXEDFR_TABTITLE2 = "Fixed refresh rate"
IDS_FIXEDFR_BUTTON_DEFAULT = "Default"
IDC_CHECK_SUPPORTVIRTUALSCREEN = "Enable / Disable Virtual Screen."
IDC_CHECK_ENABLEFIXEDREFRESHRATE = "Enable/Disable the function of fixed refresh rate. You may choose a display mode with the desired refresh rate first. The selected item will be added into the following table. Whenever an application switchs to a resolution with specific color depth, the refresh rate will be locked to the predefined value."
IDC_STATIC_DISPLAY_A = "Show the status of selected output modes and display device outputs."
IDC_STATIC_DISPLAY_B = "Show the status of selected output modes and display device outputs."
IDS_DRVMODE_APPLY = "Apply"
IDC_BUTTON_INSERTSELECTED = "Insert the selected mode above into the following list. "
IDC_COMBO_LISTALLSUPPORTMODES = "List all supported display modes."
IDC_LISTCTRL_LISTALLFIXEDMODE = "List of fixed refresh rates. You may add a desired display mode or remove a specific mode from the list."
IDC_BUTTON_DELETEMODE = "Remove a selected mode from the following list."
IDC_BUTTON_DEFAULT = "Restore the default display modes."
IDS_FIXEDFR_INSERTITEMWARNNINGMSG = "The selected resolution with specific color depth is duplicated. Do you want to apply the newest refresh rate?"
DisplaySetting_DisplayMode_ForceOnDevice = "Undetected secondary devices"
DisplaySetting_DisplayMode_ForceOnDevice_Tooltip = "Enable/Disable the function to list out the undetected devices and select one device to be turn on forcibly."
DisplaySetting_CustomizeDisplayMode_PageTitle = "Customize Display Mode"
DisplaySetting_CustomizeDisplayMode_Width = "Width"
DisplaySetting_CustomizeDisplayMode_Height = "Height"
DisplaySetting_CustomizeDisplayMode_ColorQuality = "Quality"
DisplaySetting_CustomizeDisplayMode_RefreshRate = "Refresh Rate"
DisplaySetting_CustomizeDisplayMode_SelectTiming_Text = "Select the display mode timing for your display device."
DisplaySetting_CustomizeDisplayMode_GTF = "General Timing Formula (GTF)"
DisplaySetting_CustomizeDisplayMode_DMT = "Discrete Monitor Timing (DMT)"
DisplaySetting_CustomizeDisplayMode_CVT = "Coordinated Video Timing (CVT) Standard"
DisplaySetting_CustomizeDisplayMode_ListCtrlColumn1Title = "Customize Display Mode"
DisplaySetting_CustomizeDisplayMode_ListCtrlColumn2Title = "Timing Mode"
DisplaySetting_CustomizeDisplayMode_Insert_toolTip = "Insert the user defined display mode into the customized display mode table."
DisplaySetting_CustomizeDisplayMode_Remove_toolTip = "Remove the specified display mode from the customized display mode table."
DisplaySetting_CustomizeDisplayMode_RemoveAll_toolTip = "Remove all display modes from the customized display mode table."
DisplaySetting_CustomizeDisplayMode_Msg1 = "The specified width is too narrow."
DisplaySetting_CustomizeDisplayMode_Msg2 = "The specified width is too wide."
DisplaySetting_CustomizeDisplayMode_Msg3 = "The specified height is too low."
DisplaySetting_CustomizeDisplayMode_Msg4 = "The specified height is too high."
DisplaySetting_CustomizeDisplayMode_Msg5 = "The specified color quality is too high."
DisplaySetting_CustomizeDisplayMode_Msg6 = "The specified color quality is too low."
DisplaySetting_CustomizeDisplayMode_Msg7 = "The user defined display mode is the standard display mode of OS."
DisplaySetting_CustomizeDisplayMode_Msg8 = "Will you still want to insert anyway?"
DisplaySetting_CustomizeDisplayMode_Msg9 = "Insert by force maybe cause the monitor crashed."
DisplaySetting_CustomizeDisplayMode_Msg10 = "Please input another customized display mode again."
DisplaySetting_CustomizeDisplayMode_Msg11 = "Please select the color quality of the customized display mode from the combo box."
DisplaySetting_CustomizeDisplayMode_Msg12 = "This is an invalid customized display mode."
cg_combobox_DisplaySetting_LeftDeviceList_Tooltip = "Select display device type"
cg_combobox_DisplaySetting_RightDeviceList_Tooltip = "Select display device type"
DisplaySetting_CustomizeDisplayMode_Width_toolTip = "User inputs the desire screen horizontal width."
DisplaySetting_CustomizeDisplayMode_Height_toolTip = "User inputs the desire screen vertical height."
DisplaySetting_CustomizeDisplayMode_RefreshRate_toolTip = "User inputs the desire screen refresh rate."
DisplaySetting_CustomizeDisplayMode_ColorQuality_toolTip = "User inputs the desire screen color quality."
DisplaySetting_CustomizeDisplayMode_SelectTiming_toolTip = "User can select the timing mode for the desire customized display mode."
DisplaySetting_CustomizeDisplayMode_ListControl_toolTip = "The customized modes table. User can insert a new desire customized display mode into the table or delete a defined custmoized display mode from the table."
DisplaySetting_SubPage1Title = "Display Mode"
DisplaySetting_SubPage2Title = "Fixed refresh rate"
DisplaySetting_SubPage3Title = "Customize Display Mode"
DisplaySetting_CustomizeDisplayMode_Insert = "Insert"
DisplaySetting_CustomizeDisplayMode_Remove = "Remove"
DisplaySetting_CustomizeDisplayMode_RemoveAll = "Remove All"
DisplaySetting_CustomizeDisplayMode_LawDlg_Title = "Insert the customized display mode"
DisplaySetting_CustomizeDisplayMode_LawDlg_Warning = "Please read the following license agreement."
DisplaySetting_CustomizeDisplayMode_LawDlg_ListContent = "TERMS AND CONDITIONS %s%sWARNING: SINCE WE ARE UNAWARE OF THE DESIGN SPECIFICATIONS OF YOUR COMPUTER SYSTEM, WE ARE UNABLE TO GIVE WARRANTY NOR GUARANTEE THAT THIS SOFTWARE UTILITY YOU ARE ABOUT TO ENABLE ("UTILITY") WILL RUN SMOOTHLY ON YOUR COMPUTER SYSTEM UNDER THE MANUFACTURER'S DESIGN SPECIFICATIONS. YOUR USE OF THIS UTILITY MAY CAUSE SYSTEM DAMAGE AND VOID WARRANTIES, WHICH MAY RESULT IN, INCLUDING WITHOUT LIMITATION: HIGHER SYSTEM VOLTAGES, TEMPERATURE RISES ABOVE NORMAL, EXCESSIVE FREQUENCIES, AND CHANGES TO BIOS THAT MAY CORRUPT THE BIOS. YOUR COMPUTER'S OPERATING SYSTEM MAY HANG WHICH MAY RESULT IN DATA LOSS OR CORRUPTED IMAGES. THE COMPUTER SYSTEM, HARDWARE AND SOFTWARE WARRANTIES MAY BE VOIDED, AND YOU MAY NOT RECEIVE ANY FURTHER MANUFACTURER SUPPORT, DEPENDING ON THE MANUFACTURER OF YOUR COMPUTER SYSTEM.%sXGI TECHNOLOGY INC. DOES NOT PROVIDE CUSTOMER SERVICE SUPPORT FOR THIS UTILITY. IT IS FOR THESE REASONS THAT ABSOLUTELY NO WARRANTY OR GUARANTEE IS EITHER EXPRESS OR IMPLIED. BEFORE ENABLING AND USING, YOU SHOULD DETERMINE THE SUITABILITY OF THE UTILITY FOR YOUR INTENDED USE, AND YOU SHALL ASSUME ALL RESPONSIBILITY IN CONNECTION THEREWITH. %s%s%sDISCLAIMER OF WARRANTIES%s%sALL MATERIALS, INFORMATION, AND SOFTWARE PRODUCTS, INCLUDED IN OR MADE AVAILABLE THROUGH THIS UTILITY ARE PROVIDED "AS IS" AND "AS AVAILABLE" FOR YOUR USE. THE UTILITY IS PROVIDED WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. XGI TECHNOLOGY INC. AND ITS SUBSIDIARIES DO NOT WARRANT THAT THE UTILITY IS RELIABLE OR CORRECT; THAT ANY DEFECTS OR ERRORS WILL BE CORRECTED; OR THAT THE UTILITY IS FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. YOUR USE OF THE UTILITY IS SOLELY AT YOUR RISK. BECAUSE SOME JURISDICTIONS DO NOT PERMIT THE EXCLUSION OF CERTAIN WARRANTIES, THESE EXCLUSIONS MAY NOT APPLY TO YOU.%s%s%sLIMITATION OF LIABILITY%s%sUNDER NO CIRCUMSTANCES SHALL XGI TECHNOLOGY INC. AND ITS SUBSIDIARIES BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OF OR INABILITY TO USE, THE UTILITY. THIS LIMITATION APPLIES WHETHER THE ALLEGED LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER BASIS, EVEN IF XGI TECHNOLOGY INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF THE ABOVE DAMAGES; XGI TECHNOLOGY INC.'S LIABILITY IN SUCH JURISDICTIONS SHALL BE LIMITED TO THE EXTENT PERMITTED BY APPLICABLE LAW. %s%sIF YOU HAVE READ, UNDERSTOOD, AND AGREE TO ALL OF THE ABOVE TERMS AND CONDITIONS, CLICK THE "I ACCEPT" BUTTON BELOW. %s%sIF YOU DO NOT AGREE WITH ALL OF THE ABOVE TERMS AND CONDITIONS, THEN CLICK ON THE "I DO NOT ACCEPT" BUTTON BELOW, AND DO NOT ENABLE OR USE THE UTILITY."
DisplaySetting_CustomizeDisplayMode_LawDlg_CheckShow = "Do not show the dialog next time."
DisplaySetting_CustomizeDisplayMode_LawDlg_Accept = "I accept"
DisplaySetting_CustomizeDisplayMode_LawDlg_NotAccept = "I do not accept"
;[GammaCorrection]
[GammaCorrection]
IDS_GAMMA_PAGETITLE = "Desktop Gamma Correction"
IDS_GAMMA_CHANGE = "Change Bitmap"
IDS_GAMMA_TINT = "TINT"
IDS_GAMMA_ENHANCEMENT = "Color Enhancement"
IDS_GAMMA_RGBPAGE = "RGB"
IDS_GAMMA_COLORPAGE = "Color Calibration"
IDS_GAMMA_BLUEISH = "Blueish"
IDS_GAMMA_UKP = "Europe Proofing"
IDS_GAMMA_STANDARD = "Uncalibrated"
IDS_GAMMA_USP = "US Proofing"
IDS_GAMMA_REDDISH = "Reddish"
IDS_GAMMA_RAMDAC1 = "Primary"
IDS_GAMMA_RAMDAC2 = "Secondary"
IDS_GAMMA_BRIGHT = "Brightness"
IDS_ALL_ABOUT = "&About..."
IDS_ALL_VERSION = "Version %s"
IDS_TV_MSG_RESTART = "You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?"
IDC_SLIDER_R = "Adjust the gamma value for red channel. The higher the value is, the more reddish the screen color is."
IDC_SLIDER_G = "Adjust the gamma value for green channel. The higher the value is, the more greenish screen color is."
IDC_SLIDER_B = "Adjust the gamma value for blue channel. The higher the value is, the more bluish the screen color is."
IDC_Change = "You can select your favorite bitmap to replace the default one in the setting Page. The system supports bitmap (.bmp) file only."
IDC_SLIDER_TINT = "Tint adjustment. You can set the tint as warmer (reddish) or cooler (bluish)."
IDC_SLIDER_BRIGHTNESS = "Adjust brightness for the best performance of your monitor."
IDC_SLIDER_COLORENHANCEMENT = "Adjust color enhancement for the best performance of your monitor."
IDC_DrawPicture = "It serves as a visual aid to the effect of Gamma Correction."
IDC_SLIDER_RGB = "Adjust the value of selected RGB item."
IDC_COMBO_RAMDAC = "Select the monitor to be adjusted."
IDS_OK = "OK"
IDS_CANCEL = "Cancel"
IDS_APPLYALL = "Apply All"
IDS_DEFAULTALL = "Default"
;[HotkeyDefine]
[HotkeyDefine]
IDS_HOTKEY_FUNCTION = "Function"
IDS_HOTKEY_KEY = "Key Assignment"
IDS_HOTKEY_STATUS = "Status"
ID_GROUP_OSD = "OSD"
ID_KEY_OSD_ACTIVATE = "Show"
ID_KEY_OSD_HIDE = "Hide"
ID_KEY_OSD_UPWARD = "Up"
ID_KEY_OSD_DOWNWARD = "Down"
ID_KEY_OSD_RIGHT = "Right"
ID_KEY_OSD_LEFT = "Left"
ID_KEY_OSD_PGUP = "Exit"
ID_KEY_OSD_PGDN = "Select"
ID_KEY_OSD_HELP = "Help"
ID_GROUP_DESC_OSD = "Hotkey for OSD"
ID_DESC_OSD_ACTIVATE = "Activate OSD"
ID_DESC_OSD_HIDE = "Hide OSD"
ID_DESC_OSD_UPWARD = "Move upward"
ID_DESC_OSD_DOWNWARD = "Move downward"
ID_DESC_OSD_RIGHT = "Select right"
ID_DESC_OSD_LEFT = "Select left"
ID_DESC_OSD_PGUP = "Exit current page or setting item"
ID_DESC_OSD_PGDN = "Select the currently lighted item"
ID_DESC_OSD_HELP = "Show help information"
ID_GROUP_MDESK = "DesktopPlus"
ID_KEY_MDESK_NEXT = "Next desktop"
ID_KEY_MDESK_PREV = "Previous desktop"
ID_KEY_MDESK_PROPERTYPAGE = "Show property page"
ID_KEY_MDESK_DESKTRAYICON = "Show desktop tray icon"
ID_KEY_MDESK_MINIWND = "Show mini window"
ID_KEY_MDESK_DESKNAME = "Show desktop name"
ID_GROUP_DESC_MDESK = "Hotkey for DesktopPlus"
ID_DESC_MDESK_NEXT = "Switch to the next desktop"
ID_DESC_MDESK_PREV = "Switch back to the previous desktop"
ID_DESC_MDESK_PROPERTYPAGE = "Show the property page of DesktopPlus"
ID_DESC_MDESK_DESKTRAYICON = "Show the current desktop icon on the task bar"
ID_DESC_MDESK_MINIWND = "Show the mini window of DesktopPlus"
ID_DESC_MDESK_DESKNAME = "Show desktop name"
ID_GROUP_SRNMAP = "Navigator"
ID_KEY_SRNMAP_OPEN = "Open"
ID_KEY_SRNMAP_CLOSE = "Close"
ID_GROUP_DESC_SRNMAP = "Hotkey for Navigator"
ID_DESC_SRNMAP_OPEN = "Open Navigator"
ID_DESC_SRNMAP_CLOSE = "Close Navigator"
IDD_DIALOG_HOTKEYDEFINE = "Hotkeys"
IDD_DIALOG_KEYDEFINE = "Define key"
IDC_BUTTON_DEFAULT = "Default"
IDC_BUTTON_RESET = "Reset"
IDC_BUTTON_ENABLE = "Enable"
IDC_BUTTON_DISABLE = "Disable"
IDC_BUTTON_REMOVE = "Remove"
IDC_STATIC_DEFINITION = "Definition"
IDC_STATIC_HOTKEYGROUPNAME = "Groups:"
IDC_STATIC_HKDESCRIPTION = "Description"
IDC_CHECK_ALT = "ALT key"
IDC_CHECK_CTRL = "CTRL key"
IDC_STATIC_KEY = "Key:"
IDC_STATIC_VALIDKEY = "Valid key is '0' ~ '9' or 'A' ~ 'Z'."
ID_OK = "OK"
ID_CANCEL = "Cancel"
IDS_MSG_CONFLICT = "The key is conflicted with "%s: %s"."
;[Information]
[Information]
IDS_INFOPAGE_PRODUCTNAME = "XGI40"
IDS_INFOPAGE_COMPANY = "Company"
IDS_INFOPAGE_PRODUCT = "Product"
IDS_INFOPAGE_ITEM = "Item"
IDS_INFOPAGE_INFORMATION = "Content"
IDS_INFOPAGE_FILEVERSION = "File Version"
IDS_INFOPAGE_FILEDESCRIPTION = "File Description"
IDS_INFOPAGE_COPYRIGHT = "Copyright"
IDS_INFOPAGE_INTERNALNAME = "Internal Name"
IDS_INFOPAGE_TITLE = "Product and File Information"
IDS_INFOPAGE_ORIGINALFILENAME = "Original File Name"
IDS_INFOPAGE_PRODUCTVERSION = "Product Version"
IDS_INFOPAGE_FILE = "File Name"
IDS_INFOPAGE_SOFTWAREVERSION = "Software Version"
IDS_INFOPAGE_CHIPTYPE = "Chip Type"
IDS_INFOPAGE_DRIVERVERSION = "Driver Version"
IDS_INFOPAGE_MEMORYSIZE = "Video Memory(Size)"
IDS_INFOPAGE_MEMORYTYPE = "Video Memory(Type)"
IDS_INFOPAGE_BIOS = "BIOS"
IDS_INFOPAGE_FILETITLE = "File"
IDS_INFOPAGE_BIOSOEMSTRING = "BIOS(OEM String)"
IDS_INFOPAGE_BIOSOEMVENDERNAME = "BIOS(OEM VenderName)"
IDS_INFOPAGE_BIOSOEMPRODUCTNAME = "BIOS(OEM ProductName)"
IDS_INFOPAGE_BIOSOEMPRODUCTREV = "BIOS(OEM ProductRev)"
IDS_INFOPAGE_CLOSE = "Close"
IDS_INFOPAGE_PACKAGETITLE = "Package"
IDS_INFOPAGE_MEMORY = "Video Memory"
IDS_INFOPAGE_ENGINECLK = "Graphic Engine Clock"
IDS_INFOPAGE_MEMORYCLK = "Video Memory Clock"
IDS_TOOLTIP_CHIPLOGO = "XGI VGA Chip logo"
IDS_TOOLTIP_PINFOLISTVIEW = "Show the information of XGI VGA/video bridge."
IDS_TOOLTIP_VBCHIP301 = "Video bridge 301"
IDS_TOOLTIP_VBCHIP302 = "Video bridge 302"
IDS_TOOLTIP_VBCHIP303 = "Video bridge 303"
IDS_TOOLTIP_FILEINFOLISTVIEW = "Show XGI VGA drivers and utilities information."
IDS_INFOPAGE_VBCHIPTYPE = "Video Bridge Chip Type"
;[MINIWINDOW]
[MINIWINDOW]
IDS_STRING_BTN_CLOSE = "Close"
IDS_STRING_BTN_MINIWND_SHOW = "Show mini-desktop"
IDS_STRING_TITLE_BANNER = "Mini-Window"
IDS_STRING_BTN_MINIWND_HIDE = "Hide mini-desktop"
;[Navigator]
[Navigator]
IDS_STRING_TITLE_SCREENMAP = "Navigator"
IDS_STRING_SM_BUTTON_CLOSE = "Close"
IDS_STRING_SM_BUTTON_PARA = "Setting"
IDS_STRING_TITLE_PARAMETER = "Setting Dialog"
IDS_STATIC_GENERAL = "General Setting"
IDS_STATIC_COLOR_SETTING = "Color Adjustment"
IDS_CHECK_DISPLAY_CURSOR = "Show Cursor"
IDS_CHECK_AUTO_CLOSE = "Automatic Close"
IDS_STATIC_AUTOCLOSE_SEC = "second"
IDS_STATIC_REFRESH_RATE = "Refresh Rate :"
IDS_STATIC_REFRESH_RATE_SEC = "second"
IDS_STATIC_SKIN_SELECT = "Skin Select"
IDS_STATIC_LINE_WIDTH = "Rectangle Border Width :"
IDS_STATIC_LINE_WIDTH_PIX = "pixel"
IDS_STATIC_RECTANGLE1 = "Rectangle 1 :"
IDS_STATIC_RECTANGLE2 = "Rectangle 2 :"
IDS_STATIC_CURRENT_DISP = "Current Display:"
IDS_STATIC_NONCURRENT_DISP = "Non-current Display:"
IDS_PTBUTTON_OK = "OK"
IDS_PTBUTTON_CANCEL = "Cancel"
IDS_PTBUTTON_APPLY = "Apply"
IDS_PTBUTTON_DEFAULT = "Default"
IDC_PTBUTTON_DEFAULT = "Restore initial values."
IDC_PTBUTTON_OK = "Save all changes and also close current dialog."
IDC_PTBUTTON_CANCEL = "Close current dialog without saving any changes."
IDC_PTBUTTON_APPLY = "Save all changes without closing current dialog."
IDC_STATIC_REFRESH_RATE = "Adjust the appropiate refresh rate based on the hardware capability."
IDC_CHECK_AUTO_CLOSE = "Close the application automatically after the assigned duration."
IDC_CHECK_DISPLAY_CURSOR = "Show the corresponding position of cursor on the desktop."
IDC_STATIC_SKIN_SELECT = "Select the preferred figure or skin."
IDC_STATIC_RECTANGLE1 = "Assign the border color of first visible rectangle."
IDC_STATIC_RECTANGLE2 = "Assign the border color of second visible rectangle on Mirror mode."
IDC_STATIC_CURRENT_DISP = "Assign the number color of current display with cursor inside."
IDC_STATIC_NONCURRENT_DISP = "Assign the number color of non-currently used display."
IDC_STATIC_LINE_WIDTH = "Assign the border width of visible rectangle."
IDS_NOTSUPPORT = "Current display mode is not supported. Navigator is going to be closed."
;[OSD]
;[PowerManager]
[PowerManager]
IDS0001 = "PowerManager Administrator"
IDS0002 = "PowerManager Monitor"
IDS0003 = "PowerManager Sensor"
IDS0004 = "Power Saving Mode"
IDS0005 = "Automatic Power Saving"
IDS0006 = "Optimal Power Saving"
IDS0007 = "User Defined Power Saving"
IDS0008 = "User Manual Power Saving"
IDS0009 = "Max Performance"
IDS0010 = "High Performance"
IDS0011 = "High Power Saving"
IDS0012 = "Max Power Saving"
IDS0013 = "As Optimal Power Saving is selected, PowerManager adjusts among the 4 default modes automatically according to the battery remaining."
IDS0014 = "Battery Remaining"
IDS0015 = "Users can define each battery remaining and its corresponding detailed settings as User Defined mode is selected. The PowerManager adjust based on the 4 defined modes."
IDS0016 = "Warning"
IDS0017 = "Warning Text"
IDS0018 = "Warning Sound"
IDS0019 = "Warning Action"
IDS0020 = "System"
IDS0021 = "System Standby"
IDS0022 = "System Hibernation"
IDS0023 = "VGA"
IDS0024 = "Resolution"
IDS0025 = "AGP Speed"
IDS0026 = "OverDrive"
IDS0027 = "Clock"
IDS0028 = "MCLK"
IDS0029 = "ECLK"
IDS0030 = "LCD"
IDS0031 = "LCD Expansion"
IDS0032 = "Primary LCD Backlight"
IDS0033 = "Secondary LCD Backlight"
IDS0034 = "User Manual Power Saving provides a fast, simple and easy interface to change mode whenever it is needed."
IDS0035 = "Choose a item from following listed"
IDS0036 = "PowerManager monitors related information of center processor unit (CPU) as your reference."
IDS0037 = "CPU"
IDS0038 = "CPU Information"
IDS0039 = "Vendor ID"
IDS0040 = "Frequency"
IDS0041 = "Temperature"
IDS0042 = "Voltage"
IDS0043 = "Cooling Fan"
IDS0044 = "Regarding the power monitor, PowerManager shows total system power status to provide the most integrity of power management."
IDS0045 = "POWER"
IDS0046 = "Power Status"
IDS0047 = "Power Information"
IDS0048 = "Specification"
IDS0049 = "Battery Status"
IDS0050 = "Battery Remaining"
IDS0051 = "Expected Life Time"
IDS0052 = "Battery Full Life"
IDS0053 = "PowerManager refreshes the utilization of graphic processor unit (GPU) and power consumption just in time."
IDS0054 = "GPU"
IDS0055 = "GPU PERFORMANCE"
IDS0056 = "GPU Utilization"
IDS0057 = "GPU Power Consuming"
IDS0058 = "Current"
IDS0059 = "Average"
IDS0060 = "Category"
IDS0061 = "Item"
IDS0062 = "Low Limit"
IDS0063 = "Status"
IDS0064 = "High Limit"
IDS0065 = "PowerManager can monitor the voltage of graphic processor unit (GPU) voltage. Moreover, PowerManager also monitor the dynamic random access memory (DRAM) voltage and its I/O voltages."
IDS0066 = "Voltage"
IDS0067 = "GPU Voltage"
IDS0068 = "DRAM I/O Voltage"
IDS0069 = "DRAM Voltage"
IDS0070 = "PowerManager shows the fan speed on graphic processor unit (GPU) to prevent the overheat caused by lower-heat dispersion."
IDS0071 = "Fan"
IDS0072 = "Fan Speed"
IDS0073 = "PowerManager monitors the temperatures of graphic processor unit (GPU) and its dynamic random access memory (DRAM)."
IDS0074 = "Temperature"
IDS0075 = "GPU Temperature"
IDS0076 = "DRAM Temperature"
IDS0077 = "640 x 480"
IDS0078 = "800 x 600"
IDS0079 = "1024 x 768"
IDS0080 = "Windows will now adjust your display settings. This will take a few seconds, during which your screen may flicker. If the windows does reappear correctly, wait 15 seconds, and your original setting will be restored."
IDS0081 = "Do you want to keep current settings?"
IDS0082 = "Advanced Setting"
IDS0083 = "ON"
IDS0084 = "OFF"
IDS0085 = "Resolution setting of PowerManager conflicts with current value. Do you want to keep the setting of power saving mode?"
IDS0086 = "Warning"
IDS0087 = "LCD expansion setting of PowerManager conflicts with current value. Do you want to keep the setting of power saving mode?"
IDS0088 = "Memory and engine clock setting of PowerManager conflicts with current value. Do you want to keep the setting of power saving mode?"
IDS0089 = "PowerManager Configuration"
IDS0090 = "About PowerManager..."
IDS0091 = "Exit PowerManager"
IDS0092 = "Processor"
IDS0093 = "Family"
IDS0094 = "Model"
IDS0095 = "Stepping"
IDS0096 = "PowerManager AutoPower"
IDS0097 = "PowerManager AutoPower automatically manages the hardware stability, temperature and power consumption based on user-selected level and promotes the integrated performance of GPU."
IDS0098 = "PowerManager ThermoGuard provides two thresholds for real-time GPU temperature detection and warning without any adjustments."
IDS0099 = "PowerManager AutoPower"
IDS0100 = "Stability"
IDS0101 = "Balance"
IDS0102 = "Performance"
IDS0103 = "PowerManager ThermoGuard"
IDS0104 = "Graphic Processor Unit (GPU1) Temperature Threshold"
IDS0105 = "Graphic Processor Unit (GPU2) Temperature Threshold"
IDS0106 = "Default Threshold"
IDS0107 = "The warning message is not properly set. Do you want to apply reserved settings?"
IDS0108 = "The temperature of graphic processor (GPU) is too high!"
IDS0109 = "The warning message is not properly set. Please reassign the settings"
IDS0110 = "°C"
IDS0111 = "The first execution of PowerManager may take few seconds for hardware detection."
IDS0112 = "Hardware detection done successfully!"
IDS0113 = "The hardware detection has not been done completely at the first execution of PowerManager. Continue hardware detection..."
IDS0114 = "OK"
IDS0115 = "Cancel"
IDS0116 = "Apply"
IDC0830 = "Adjust the desired temperature to pop-up warning messages."
IDC0841 = "Adjust the desired temperature to pop-up warning messages."
IDC0842 = "Adjust the desired temperature to pop-up warning messages."
IDC0845 = "Adjust the desired temperature to pop-up warning messages."
IDC0846 = "Edit and assign desired warning messages."
IDC0847 = "Adjust the desired temperature to pop-up warning messages."
IDC0848 = "Adjust the desired temperature to pop-up warning messages."
IDC0849 = "Edit and assign desired warning messages."
IDC0850 = "Retrieve the default threshold settings."
IDC0851 = "Provide an integrated power control through the management of fan, clock and temperature factors. You may choose the desired requirement, Stability, Balance or Performance."
;[ScreenRotate]
[ScreenRotate]
IDS_TRAYPAGE_XROTATE = "Rotech"
;[TVSetting]
[TVSetting]
IDS_TV_PAGETITLE = "TV Output"
IDS_TV_SCANMODE = "TV Scan Mode"
IDS_TV_CHROMINANCE = "Chrominance"
IDS_TV_OFF = "OFF"
IDS_TV_ON = "ON"
IDS_TV_POSITION = "Screen Position Adjustment"
IDS_TV_SYSTEM = "TV Output System"
IDS_TV_NTSC = "NTSC"
IDS_TV_PAL = "PAL"
IDS_TV_HIVISION = "HiVision"
IDS_TV_FLICKERMODE = "AntiFlicker Mode"
IDS_TV_EDGEENHANCE = "Edge Enhancement"
IDS_TV_YFILTER = "Sharpness"
IDS_TV_NO = "No Filter"
IDS_TV_MILD = "Mild"
IDS_TV_MEDIUM = "Medium"
IDS_TV_STRONG = "Strong"
IDS_TV_ADAPTIVE = "Adaptive"
IDS_TV_TUNING = "Color Calibration Tuning"
IDS_TV_COARSE = "Coarse"
IDS_TV_FINE = "Fine"
IDS_TV_DEFAULT = "Default"
IDS_TV_FILTER = "TV Filter"
IDS_TV_ENABLE = "TV output is valid only when its resolution is under 800x600."
IDS_TV_CONTRAST = "Contrast"
IDS_TV_BRIGHT = "Brightness"
IDS_TV_HUE = "Hue"
IDS_TV_SATURATION = "Saturation"
IDS_TV_ONE = "#1"
IDS_TV_TWO = "#2"
IDS_MACROVISION = "Protected by Macrovision, the system does not allow TV devices switch."
IDS_TV_640X480 = "640 x 480"
IDS_TV_800X600 = "800 x 600"
IDS_TV_1024X768 = "1024 x 768"
IDS_TV_PAL_M = "PAL_M"
IDS_TV_PAL_N = "PAL_N"
IDS_TV_MSG_RESIZE = "Windows will now resize your desktop. This could take a few seconds, during which your screen might flicker. If Windows does not reappear correctly, wait 15 seconds, and your original settings will be restored."
IDS_TV_APPLYSIZE = "You resized your desktop. Do you want to keep this setting?"
IDS_TVADVANCEDDLG_TITLE = "Advance"
IDC_COLOR_COARSE = "Coarse adjustment of TV display as color or monochrome."
IDC_COLOR_FINE = "Fine adjustment of TV display as color or monochrome."
IDC_SCANMODE_HDE = "Adjust the size of horizontal TV display."
IDC_SCANMODE_VDE = "Adjust the size of vertical TV display."
IDC_YFILTER = "Sharpness setting, with which you can make TV display sharper or softer."
IDC_COLOR_DEFAULT = "Reset color calibration as the default value."
IDC_TVVDE_DEFAULT = "Reset TV vertical scan size as the default value."
IDC_TVHDE_DEFAULT = "Reset TV horizontal scan size as the default value."
IDC_FILTER_DEFAULT = "Reset all TV filter settings as the default value."
IDC_EDGEENHANCE = "Edge enhancement refines the image edge on TV."
IDC_ANTIFLICKER = "AntiFlicker mode setting stabilizes the output of TV signals."
IDC_CHROMINANCE = "Chrominance setting."
IDC_COLOR_BRIGHTNESS = "Adjust the brightness of TV display. The higher the value is, the brighter the screen color is."
IDC_COLOR_CONTRAST = "Adjust the contrast of TV display. The higher the value is, the more glaring the screen color is."
IDC_COLOR_HUE = "Adjust the hue of TV display. You can make TV display reddish, greenish or bluish."
IDC_COLOR_SATURATION = "Adjust the level of display saturation. The higher the value is, the deeper the screen color is."
IDC_COMBO_TV = "Select the TV to be adjusted."
IDC_ADVANCE = "Advanced Setting"
IDS_CS = "Scan Mode and Position Adjustment"
IDS_AA = "Adjust Area"
IDS_MOVE = "Move Mode"
IDS_SS = "Shrink/Stretch Mode"
IDS_ADVANCE = "Advanced Setting"
IDS_TVMODE = "TV Mode"
IDS_OVERSCAN = "Overscan"
IDS_TVFONT = "TV Font"
IDC_H_SHRINK = "Horizontal Shrink"
IDC_H_STRETCH = "Horizontal Stretch"
IDC_V_SHRINK = "Vertical Shrink"
IDC_V_STRETCH = "Vertical Stretch"
IDC_H_S = "Adjust horizontal expansion"
IDC_V_S = "Adjust vertical expansion"
IDC_DESKTOPAREA = "Adjust the resolution of desktop area"
IDC_OVERSCAN = "Adjust the TV display to full screen to avoid the black frame."
IDC_TVMODE = "Select the output signal (NTSC or PAL) of your TV. The NTSC system is used in U.S.A, Japan, Taiwan and Mainland China; the PAL system is used in most European countries."
IDC_MOVE = "Adjust the location of screen"
IDC_SS = "Adjust the size of screen"
IDC_H_M = "Horizontal location adjustment"
IDC_V_M = "Vertical location adjustment"
IDS_OK = "OK"
IDS_CANCEL = "Cancel"
IDS_APPLYALL = "Apply All"
IDS_DEFAULTALL = "Default All"
IDS_DESKTOPAREA = "Desktop Area"
IDS_TV_HDTV_525I = "HDTV_480I"
IDS_TV_HDTV_525P = "HDTV_480P"
IDS_TV_HDTV_750P = "HDTV_720P"
IDS_TV_HDTV_1080I = "HDTV_1080I"
IDS_UNDERSCAN = "Underscan"
IDS_OPTIMALSCANMODE = "Optimal Scan Mode"
;[UtilityManager]
[UtilityManager]
IDS_OK = "&Ok"
IDS_CANCEL = "&Cancel"
IDS_YES = "&Yes"
IDS_NO = "&No"
IDS_APPLY = "&Apply"
IDS_DLG_D3D = "3D Setting"
IDS_DLG_D3DDESC = "Includes of brightness, performance, stereo."
IDS_DLG_LCDTV = "TV Center Screen"
IDS_DLG_LCDTVDESC = "Adjust screen display position of TV."
IDS_DLG_GAMMA = "Desktop Gamma Correction"
IDS_DLG_GAMMADESC = "Calibrate the screen gamma value by red, green, blue."
IDS_DLG_TV = "TV Output"
IDS_DLG_TVDESC = "Set the TV screen position, screen size, TV filter, etc."
IDS_DLG_VIDEO = "Video Setting"
IDS_DLG_VIDEODESC = "Adjust the contrast and brightness of video output."
IDS_DLG_INFO = "Product and File Information"
IDS_DLG_INFODESC = "List out the product information and all related files information."
IDS_UTILITY_PAGETITLE = "Utility Manager"
IDS_DLG_POWERMGR = "Power Manager"
IDS_DLG_ROTATE = "Rotate Screen"
IDS_TOOLTIP_GAMMA = "Calibrate the screen gamma value (red, green and blue)."
IDS_TOOLTIP_VIDEO = "Adjust the contrast, brightness, etc. of video output."
IDS_TOOLTIP_D3D = "Set D3D and OpenGL parameters, including performance, stereo, FSAA, etc."
IDS_TOOLTIP_TV = "Set the TV screen position, screen size, TV filter, etc."
IDS_TOOLTIP_DISPLAYMODE = "Set resolution, color depth and refresh rate."
IDS_TOOLTIP_INFO = "Show product information and relevant files."
IDS_TOOLTIP_DISPLAYMODE_FUJITSU = "Change device settings"
IDS_TOOLTIP_POWERMGR = "Automatically manages the hardware stability, temperature and power consumption based on user-selected level"
IDS_TOOLTIP_ROTATE = "Rotate the screen view"
;[VideoSetting]
[VideoSetting]
IDS_VIDEO_OVERLAYINDEVICE2MSG = "You have chosed the second device to output!! If you want to use the preview image, you have to pull the Dialog to the second device."
IDS_VIDEO_SETTINGGAMMA = "Gamma Correction"
IDS_VIDEO_PAGETITLE = "Video Setting"
IDS_VIDEO_SETTING = "Setting"
IDS_VIDEO_OVERLAY = "Overlay"
IDS_VIDEO_OVERLAY1 = "One"
IDS_VIDEO_OVERLAY2 = "Two"
IDS_VIDEO_CONTRAST = "Contrast"
IDS_VIDEO_BRIGHT = "Brightness"
IDS_VIDEO_RESET = "Reset All"
IDS_VIDEO_OVERLAY1OPENED = "Overlay was created by other application"
IDS_VIDEO_OVERLAY2OPENED = "Overlay was created by other application"
IDS_VIDEO_OVERLAYINVALID = "Hardware limitation, so this overlay cannot be created."
IDS_VIDEO_HUE = "Hue"
IDS_VIDEO_SATURATION = "Saturation"
IDS_VIDEO_COLORENHANCE = "Color Enhancement"
IDS_VIDEO_VIVID = "Vivid"
IDS_VIDEO_GAMMA = "Video RGB"
IDS_VIDEO_COLORCAL = "Video Controls"
IDC_BRIGHTNESS = "Adjust video display brightness. The higher the value is, the brighter the screen color is."
IDC_HUE = "Adjust video display hue. You can make video display reddish, greenish or bluish."
IDC_SATURATION = "Adjust the level of display saturation. The higher the value is, the deeper the screen color is."
IDC_CONTRAST = "Adjust video display contrast. The higher the value is, the more glaring screen color is."
IDC_VIVID = "Adjust video display vivid. The higher the value is, the more colorful video is."
IDC_SLIDER_VIDEO_R = "Adjust the gamma value of the red channel. The higher the value is, the more reddish the screen color is."
IDC_SLIDER_VIDEO_G = "Adjust the gamma value of the green channel. The higher the value is, the more greenish the screen color is."
IDC_SLIDER_VIDEO_B = "Adjust the gamma value of the blue channel. The higher the value is, the more bluish the screen color is."
IDC_SLIDER_VIDEO_RGB = "Adjust the value of selected RGB item."
IDS_DEFAULTALL = "Default All"
IDS_APPLYALL = "Apply All"
IDS_OK = "OK"
IDS_CANCEL = "Cancel"
IDC_CHECK_COLORENHANCE = "Enable/Disable Color Enhancement."
IDS_VIDEO_THEATERMODE_CHECK = "Theater mode"
IDC_VIDEO_THEATERMODE_CHECK = "Enable/Disable theater mod. When user is playing the video in the colne mode, he can enable the theater mode. It will cause one monitor be full screen."
VideoSetting_2ndPage_Msg1 = "The theater mode status was changed and the overlay was occupied by other video player. Please close the video player first and then press OK to active the function."
;[WinFlash]
[WinFlash]
IDS_OK = "Close"
IDS_ABOUTBOX = "About this utility..."
IDS_STATIC_FLASH = "Rom Type:"
IDS_STATIC_VGA = "VGA Card:"
IDS_TITLE = "VGA Flash ROM Utility"
IDS_STATIC_INFORMATION = "Information"
IDS_STATIC_BACKUP = "Backup"
IDS_STATIC_STRING_BACKUP = "Backup flash ROM data"
IDS_BUTTON_BACKUP = "Backup"
IDS_STATIC_UPDATE = "Update"
IDS_RADIO_RESERVE = "Reserve Boot Data"
IDS_STATIC_STRING_UPDATE = "Update flash ROM data"
IDS_BUTTON_FLASH = "Update"
IDS_RADIO_ERASE = "Erase Boot Data"
IDS_RADIO_LOW = " 0 - 64K"
IDS_RADIO_HIGH = "64K - 128K"
IDS_VGA_ERROR = "Error! VGA card detection fail"
IDS_FLASH_ERROR = "Error! Flash ROM detection fail"
IDS_VGA_FLASH_OK = "Hardware detection success !"
IDS_BUTTON_INFO = "More detail..."
IDS_STRING_SAVETITLE = "Assign backup file name"
IDS_STRING_UPDATETITLE = "Assign update source"
IDS_STRING_SAVEFAIL = "Failure saving to file !"
IDS_STRING_SAVESUCCESS = "Save to file successful !"
IDS_STRING_UPDATESUCCESS = "Update successful !"
IDS_STRING_UPDATEFAIL_ERASE = "Failure erasing data !"
IDS_STRING_UPDATEFAIL_FLASH = "Failure updating data !"
IDS_STRING_UPDATEFAIL_CHECK = "Failure checking data !"
IDS_STATIC_PROGRESS = "Progress :"
IDS_STATIC_STATE = "State :"
IDS_STRING_REBOOT = "Restart computer for update to take effect !"
IDS_STRING_FLASHCONFIRM = "Updating your VGA card with the incorrect BIOS may cause abnormal operation or even physical damage to your card. We strongly suggest you verify with your manufacturer before you start this operation. ""Do you still want to update your BIOS for your VGA card using the ROM file that you have selected?"""
IDS_STATIC_DRAM = "Video Memory:"
IDS_STATIC_VER = "BIOS Version:"
IDS_DRAM_ERROR = "Error! Video memory detection fails"
IDS_VER_ERROR = "Error! BIOS version detection fails"
IDS_INVALIDATEVBIOS = "Erroneous File. Please select a valid file."
IDS_FLASH_CARD = "VGA Card:"
IDS_FLASH_FILE = "Selected File:"
IDS_FLASH_DRAM = "Video Memory Provider ="
IDS_FLASH_ROM = "BIOS Version Number ="
IDS_FLASH_VERCOMPARE = "Version Comparison:"
IDS_NONSUPTFLASH = "Flash ROM update is not supported. Please contact with retailers for advanced information."
;[XGITray]
[XGITRAY]
IDR_MAINFRAME = "XGI Utility Tray"
IDI_XGIICON = "XGI Utility Tray"
ID_TRAY_SYSTEMPRO = "System Property (S)"
ID_TRAY_DISPLAYPRO = "Display Property(D)"
ID_TRAY_HELP = "Help(H)"
ID_TRAY_SUSPEND = "Exit Tray (E)"
ID_TRAY_OPEN = "Open XGI Utility Tray Window"
ID_TRAY_ABOUT = "About (B) ..."
ID_TRAY_APPLICATION = "Application(A)"
ID_TRAYAPP_PLAYER = "Media Player (M)"
ID_TRAYAPP_CENTERSCREEN = "TV Screen Position Adjustment (P)"
ID_TRAYAPP_UNINSTALLATION = "Uninstalling Display Driver(U)"
ID_TRAYAPP_DVDON = "Enable Direct DVD(E)"
ID_TRAYAPP_DVDOFF = "Disable Direct DVD(D)"
ID_TRAYAPP_OSDON = "Enable OSD(O)"
ID_TRAYAPP_OSDOFF = "Disable OSD(S)"
ID_TRAYAPP_TVZOOMINOUT = "TV Zoom In/Out (T)"
ID_TRAYAPP_HOTKEY = "HotKeys(H)"
ID_TRAYPAGE_DISPLAY = "Display Mode Settings(I)"
ID_TRAYPAGE_GAMMA = "Desktop Gamma Correction(G)"
ID_TRAYPAGE_VIDEO = "Video Setting (V)"
ID_TRAYPAGE_TVOUT = "TV Output(T)"
ID_TRAYPAGE_3D = "3D Setting(3)"
ID_TRAYPAGE_INFORMATION = "Product and File Information(F)"
ID_TRAYPAGE_SETTINGMANAGER = "Setting Manager(M)"
ID_TRAYAPP_AGPINFO = "AGP Information(P)"
ID_TRAYAPP_SCREENMAP = "Navigator(N)"
ID_TRAYPAGE_XROTATE = "Rotech(R)"
ID_TRAYAPP_POWERMGR = "PowerManager(W)"
ID_TRAYAPP_DESKMGR = "DesktopPlus(K)"
;[XGIRegister]
[XGIRegister]
IDS_REGISTER_TITLE = "Sign Up XGI Member now!"
IDS_BUTTON_Sign_Now = "Sign Up Now"
IDS_BUTTON_Sign_Never = "Don't remind me"
IDS_BUTTON_Sign_Later = "Sign Up later"
IDS_SIGN_NOTATION_TEXT = "Join XGI member is quick, easy and absolutely free! You are going to enjoy the following functions:"
IDS_SIGN_NOTATION1 = "%d%. XGI e-Newsletter: inform you the latest news."
IDS_SIGN_NOTATION2 = "%d%. Promotion: offer member only promotion and giveaway."
IDS_SIGN_NOTATION3 = "%d%. Resume: edit your online XGI resume."
IDS_SIGN_NOTATION4 = "%d%. Personal Profile: update your contact info."
IDS_SIGNGROUP_TITLE = "New XGI User"
IDS_Sign_Remind = "You can still execute "%s" to join XGI member under Start Menu\\Programs\\%s."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.