************************************ LSI Logic MegaRAID Firmware Release ************************************ Release date: 04/24/09 ====================== Supported Controllers: ====================== MegaRAID SAS 8704ELP MegaRAID SAS 8704EM2 MegaRAID SAS 8708ELP MegaRAID SAS 8708EM2 MegaRAID SAS 8880EM2 MegaRAID SAS 8888ELP Component: ========= SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers Release date: 04/24/09 Version Numbers: =============== Current Firmware Package: 11.0.1-0013 (EF-M4) Current Package Details: APP-1.40.42-0615_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-17-e_8-Rel Previous Firmware Package: 11.0.1-0008 (EF-M3) Previous Package Details: APP-1.40.32-0580_BB-1.00.00.01-0011_BIOS-2.06.00_WEBBIOS-2.2-16-e_8-Rel Bug Fixes and Enhancements: =========================== Firmware: LSID100107823 (CO) Auto Generated from PR LSIP200008858 Headline: Modify FW PHY Settings for E.R. LSID100122875 (CO) Auto Generated from PR LSIP200008944 Headline: Modify FW PHY Settings for M.R. LSID100122878 (CO) Auto Generated from PR LSIP200008403 Headline: Drive dead option after Predictive failure. LSID100110379 (CO) CR_Ref# LSID100096989: Add Clear NVRAM to EFI LSID100123676 (CO) Auto Generated from PR LSIP200008610 Headline: SGPIO Group ID and Drive Presence LSID100122796 (DFCT) TEMPOFF_VAL has to be set to 7 (equal to 0.7 in battery) for iBBU LSID100123018 (DFCT) Data integrity issue with multi row write LSID100123373 (DFCT) Dont reset the 1078 when the express link drops for the following cards LSID100108795 (DFCT) When changing the CC schedule mode there is no event after successful operation LSID100123575 (DFCT) Inconsistency found during CC while recovering data+P parity on R6 LSID100123585 (DFCT) CC doesn't regenerate parity after hitting double media error LSID100107663 (DFCT) Fw enters megamon during error injection, CC run on 16vd PRL11 span array LSID100109051 (DFCT) Gen 1 card gives options for security while creating arrays on MSM 3.01-04 LSID100109882 (DFCT) Set DelayPOST to 60 Seconds LSID100110205 (DFCT) EF FW fails to import the RAID5 configuration (degraded issue). LSID100123742 (DFCT) FW breaks into "MonTask: line 3115 in file ../../raid/cache.c" while rebuilding with medium errors LSID100123743 (DFCT) FW breaks into "Assertion failure in ../../raid/ldbbm.c at line 1521: c->bbmHead == -1" while rebuilding with medium errors LSID100099854 (DFCT) FW read modepage value from "default" value and overwrite "saved" value. (should read from "saved" and change "current" value LSID100123877 (DFCT) Data miscompared while copyback with medium errors under I/O LSID100123861 (DFCT) Estatouh Falls FW is ignoring the isSSD setting when once set to 1. LSID100124019 (DFCT) new or changed battery installation not detetected on Catera iBBU LSID100124023 (DFCT) Configuration not found when cold boot. BIOS: LSID100101910 (CO) CR_Ref# LSID100098174: MegaRAID Skinny to support: HDD Pass-thru LSID100108221 (CO) CR_Ref# LSID100098487: F-code boot support LSID100122968 (CO) Auto Generated from PR LSIP200009631 for component_HWR_SAS_Bios Headline: BIOS displays slot information for each drive. Change to PCI Slot to avoid confusion with slot id of enclosure. LSID100123355 (CO) Auto Generated from PR LSIP200008862 for component_UNIV_PREBOOT_HOST_CLI Headline: Support CTRL-Y environment in EFI LSID100109378 (DFCT) AF-SYS0:-EFI-WebBios can not hadle more than one controller when manual intervention needed. LSID100123696 (DFCT) To ensure backward compatibility take care of 1068 in BIOS, EFI Driver and EFI CLI WebBIOS: LSID100110375 (CO) Auto Generated from PR LSIP200009118 Headline: Change MR default to HDD Cache off LSID100108626 (CO) Created CO for WB LSID100107659 (CO) CR_Ref# LSID100097537: FW should return status of variable BBUGood LSID100109814 (DFCT) No R1 prompt on Array With Free Space during config a RAID LSID100109909 (DFCT) WebBIOS-- App. Hang when application exits using mouse. Installation: ============= Use MegaCLI to flash the SAS controllers. The DOS version of MegaCLI is included in the zip file. Windows and Linux MegaCLI can be downloaded from the download section of www.megaraid.com. Command syntax: MegaCli -adpfwflash -f SAS1078_FW_Image.rom -a0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.