************************************ LSI Logic MegaRAID Firmware Release ************************************ Release date: 08/08/09 ====================== Supported Controllers: ====================== MegaRAID SAS 8704ELP MegaRAID SAS 8704EM2 MegaRAID SAS 8708ELP MegaRAID SAS 8708EM2 MegaRAID SAS 8880EM2 MegaRAID SAS 8888ELP Component: ========= SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers Release date: 08/08/09 Version Numbers: =============== Current Firmware Package: 11.0.1-0017 (EF-M6) Current Package Details: APP-1.40.62-0665_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-19-e_10-Rel Previous Firmware Package: 11.0.1-0013 (EF-M4) Previous Package Details: APP-1.40.42-0615_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-17-e_8-Rel Bug Fixes and Enhancements: =========================== Firmware: LSID100123496 (DFCT) FW does not check the additional length value on Mode Sense Cmd LSID100123345 (DFCT) RCD (Read Cache Disabled) is reversed LSID100126396 (DFCT) Remove delay after FW download to non-disk devices LSID100124636 (DFCT) Reset 1078 with out resetting GPIO block LSID100123372 (DFCT) Halt in ISR for handling DL up to DL down LSID100124576 (DFCT) [8880EM2][EF firmware] "Enclosure 1 phy bad for slot -1" error messages appear on every boot LSID100109257 (DFCT) Long IO problem – this happens after the first boot and take about 1.8-2 sec between IOs with SSD Drives LSIP200008403 (CR) Drive dead option after Predictive failure. WebBIOS: LSID100125181 (DFCT) EFI WB hangs after entering into efi WB page with 1078 controller SID100124626 (DFCT) Hang occurs when user invokes drvcfg for 1068 LSID100125115 (DFCT) No way to select >7 HDDs in one time during manual array creation in RBC LSID100126212 (DFCT) WebBIOS Screen Overwritten on Exit on 1078 card with EF program Installation: ============= Use MegaCLI to flash the SAS controllers. The DOS version of MegaCLI is included in the zip file. Windows and Linux MegaCLI can be downloaded from the download section of www.megaraid.com. Command syntax: MegaCli -adpfwflash -f SAS1078_FW_Image.rom -a0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.