1. SNMP.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (SNMP.zip)

  
==========================================================
    Configure SNMP
==========================================================


 For Windows
 -----------

      Install SNMP Service:

        1. Double click 'Add/Remove Programs' icon from Control Panel
        2. Select 'Add/Remove Windows Components' to start Windows Component Wizard
        3. Check 'Management and Monitoring Tools' and click 'Next' button
        4. Check 'Simple Network Management Protocol' and click 'OK' button
        5. Click 'Next' to complete Windows Component Wizard

      Configure SNMP Service:

        1. Double click 'Administrative Tools' icon from Control Panel
        2. Double click 'Services' icon
        3. Select SNMP Service' and then the 'Agent' tab
        4. Enter Contact and Location
        5. Select the 'Security' tab
        6. Click 'Add' button to start SNMP Service Configuration window 
        7. Select 'READ ONLY' community right, type 'public' as Community Name 
           and click 'Add' button
        8. Click 'Add' button to start SNMP Service Configuration window
        9. Select 'READ WRITE' community right, type 'private' as Community Name
           and click 'Add' button
        10. Select 'Accept SNMP packets from any host' or 'Accept SNMP packets 
            from these hosts'
        11. Enter the IP address, click 'Apply' and 'OK' button
        12. Stop and then restart SNMP Service
             
        Configurate SNMP traps:
        1. Select SNMP service and then click on Traps tab
        2. Add community name and add traps destination IP address, which is the machine receiving notification
        3. Restart SNMP service and SNMP trap service.



    For Linux
    ---------

      Edit snmpd.conf file:

        1. Locate the snmpd.conf file using the command

           snmpd -Dread_config -H 2>&1 | grep "Reading" | sort -u

        2. Add the following line in snmpd.conf

           dlmod ptIslaVistaSystem $INSTALLATION_HOME_DIR$/Agent/lib/ptIslaVistaSystem.so
           (e.g. dlmod ptIslaVistaSystem /opt/Promise/WebPAMPRO/Agent/lib/ptIslaVistaSystem.so)

        3. Add the following lines if they do not exist in snmpd.conf

           rocommunity "public"
           rwcommunity "private"
           agentaddress 161           
                     
        4. Add trap2sink IP_ADDRESS in snmpd.conf
	   IP_ADDRESS is the machine which wants to receive SNMP notification

      Configure NET-SNMP Daemon:

        1. Edit the snmpd script using the command

           vi /etc/init.d/snmpd

        2. Add the following lines in function start()

           LD_LIBRARY_PATH="/opt/Promise/WebPAMPRO/Agent/lib"
           export LD_LIBRARY_PATH
           SW_CONF_PATH="/opt/Promise/WebPAMPRO/Agent/bin"
           export SW_CONF_PATH 

        3. To disable SELinux, edit /etc/selinux/config and change the line
           'SELINUX=enforcing/' to 'SELINUX=permissive'

      Start/Stop NET-SNMP Daemon:

        1. Setup snmpd service using the command

           /etc/init.d/snmpd start

        2. Start snmpd automatically at system boot up using the command

           setup
           Select 'System services'
           check snmpd [*] snmpd

    For FreeBSD
    -----------

      Edit snmpd.conf file:

        1. The snmpd.conf file is located at /usr/local/share/snmp/. Use the 
           following command to set up configuration

           snmpconf -i -a

        2. Follow the menu to setup configuration or manually add the following
           lines in snmpd.conf

           rocommunity "public"
           rwcommunity "private"
           agentaddress 161
           dlmod ptIslaVistaSystem /opt/Promise/WebPAMPRO/Agent/lib/ptIslaVistaSystem.so

      Configure NET-SNMP Daemon:

        1. Edit snmpd script using the command

           vi /usr/local/etc/rc.d/snmpd

        2. Add the following lines

           snmpd_enable=yes
           export LD_LIBRARY_PATH=/opt/Promise/WebPAMPRO/Agent/lib
           export SW_CONF_PATH=/opt/Promise/WebPAMPRO/Agent/bin

      Start/Stop NET-SNMP Daemon:

        1. Start SNMP service using the command

           /usr/local/etc/rc.d/snmpd start

        2. To start SNMP service automatically, add the following line 
           in /etc/rc.conf

           snmpd_enable="YES"

        3. To check whether SNMP is started automatically, use the command

           /usr/local/etc/rc.d/snmpd rcvar