v2.8: 6/28/2007 cosmetic change? will fill in once get detail from developer. v2.7: Apr 18, 2007 Added special handling if expander fw 1.02.0000.70 is detected. For expander fw 1.02.0000.70, the v2.6 and before firwmare download utility will be unable to download the firmware since one cli command to set the com port mode is broken. v2.6: Jan 16, 2007 Fixed a buffer overrun issue when product name/vendor name is not programmed in expander vpd. v2.0: March 16, 2006 Added the support to prompt the user to choose whether to restore to factory defaults or not at the end of firmware download, and then prompt the user to choose whether he wants to reset the JBOD controller or not for the changes to take effect. V1.8: Nov 15, 2005 if utility detects that the boot image is included in the combined image, will first download all the images except the boot image, reboot the SAS JBOD, then update the boot image lastly. Also, will disallow users to quit if boot image updating is in progress. The normal timeout is by default 45s , however, users can change this in fwdl.ini. V1.5: Nov 2, 2005 will write 0xcf1f1b10 to register 0xa8200094 before firmware download V1.4: Sep 19, 2005 Retry when transfer error occurred. Supports combined firmware image download. Auto detect firmware version and refuse to download if firmware version is below 0.01.0000.05. V1.3: Sep 8, 2005, initial release for the comport based SAS J300S firmware download utility. This utility only works for firmware 0.01.0000.02 or above.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.