[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCI
[Options]
AMDPCI
[FileConstants]
GenericInfVersion = " v3.00"
GenericSysName = "amdpcn.sys"
GenericName = "AMDPCN"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Microsoft"
ProductMajorVersion = "3"
ProductMinorVersion = "1"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "AMDPCN"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "pcntn3Sys ndisDriver pcntn3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """pcntn3Sys"" yes no container"
NetRuleSoftwareClass = {"pcntn3Driver basic"}
NetRuleSoftwareBindable = {"pcntn3Driver pcntn3Adapter non exclusive 100"}
ProductHardwareName = "AMDPCN"
NetRuleHardwareType = "pcntn3 pcntn3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"pcntn3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the NE2500/NE5500 Series driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set IRQValue = *($(IRQList), 9)
set IOBaseAddrValue = *($(IOBaseAddrList), 17)
set DMAChannelValue = *($(DMAChannelList), 5)
set RadioIn = {4}
set BusScanValue = "ALL"
set LED0Value = *($(LEDList), 1)
set LED1Value = *($(LEDList), 1)
set LED2Value = *($(LEDList), 1)
set LED3Value = *($(LEDList), 1)
set TPValue = 1
set FullDuplexValue = *($(FullDuplexList), 4)
set BusTimerValue = *($(BusTimerList), 10)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
set IsISA = 0
set Vendor = 4130
set CardID = 8192
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CardID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set AdapterList = $($R0)
set NewAdapterList = {}
set NumNew = 0
ForListDo $(AdapterList)
set BusNum = *($($),1)
set SlotNum = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(SlotNum), $(GenericPCIAdapterName), $(ProductHardwareName)
ifstr(i) $($R1) != "YES"
set-add NumNew = $(NumNew),1
ifstr(i) $(NewAdapterList) == {}
set NewAdapterList = {$($)}
else
set NewAdapterList = >($(NewAdapterList),$($))
endif
endif
EndForListDo
set AdapterList = $(NewAdapterList)
ifint $(NumNew) == 0
set AdapterList = {{0,0,0}}
set IsISA = 1
endif
debug-output $(AdapterList)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
endif
install "Install-Helpfile"
endif
endif
SetHelpFile "pcnet.hlp" 1 11
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
configureadapter = +
SetHelpFile "pcnet.hlp" 1 11
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "BUS_TO_SCAN"
set BusScanValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TP"
set TPValue = $(ValueData)
else-ifstr(i) $(ValueName) == "LED0"
set LED0Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED1"
set LED1Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED2"
set LED2Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED3"
set LED3Value = $(ValueData)
else-ifstr(i) $(ValueName) == "IOBaseAddress"
set IOBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DMAChannel"
set DMAChannelValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FDUP"
set FullDuplexValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BUSTIMER"
set BusTimerValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
ifint $(BusInterfaceType) == 5
set IsISA = 0
else
set IsISA = 1
endif
else-ifstr(i) $(ValueName) == "BusNum"
set BusNumber = $(ValueData)
endif
EndForListDo
Ifint $(TPValue) == 0
Set CheckItemsIn = {"OFF"}
Else
Set CheckItemsIn = {"ON"}
Endif
Ifstr $(BusScanValue) == "PNP"
Set RadioIn = {1}
Else-Ifstr $(BusScanValue) == "VESA"
Set RadioIn = {2}
Else-Ifstr $(BusScanValue) == "ISA"
Set RadioIn = {3}
Else-Ifstr $(BusScanValue) == "ALL"
Set RadioIn = {4}
Else-Ifstr $(BusScanValue) == ""
Set RadioIn = {4}
Endif
Debug-Output $(InfName)" TP is "$(TPValue)
ifint $(IsISA) == 1
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValue)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 2)
endif
Debug-Output $(InfName)" IRQ_Level is "$(IRQValue)
set DMAChannelValue = *($(DMAChannelList), ~($(DMAChannelValues),$(DMAChannelValue)))
ifstr(i) $(DMAChannelValue) == ""
set DMAChannelValue = *($(DMAChannelList), 2)
endif
Debug-Output $(InfName)" DMA is "$(DMAChannelValue)
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
endif
set LED0Value = *($(LEDList), ~($(LEDValues),$(LED0Value)))
ifstr(i) $(LED0Value) == ""
set LED0Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED0 is "$(LED0Value)
set LED1Value = *($(LEDList), ~($(LEDValues),$(LED1Value)))
ifstr(i) $(LED1Value) == ""
set LED1Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED1 is "$(LED1Value)
set LED2Value = *($(LEDList), ~($(LEDValues),$(LED2Value)))
ifstr(i) $(LED2Value) == ""
set LED2Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED2 is "$(LED0Value)
set LED3Value = *($(LEDList), ~($(LEDValues),$(LED3Value)))
ifstr(i) $(LED3Value) == ""
set LED3Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED3 is "$(LED3Value)
set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexValue)))
ifstr(i) $(FullDuplexValue) == ""
set FullDuplexValue = *($(FullDuplexList), 1)
endif
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
set BusTimerValue = *($(BusTimerList), ~($(BusTimerValues),$(BusTimerValue)))
ifstr(i) $(BusTimerValue) == ""
set BusTimerValue = *($(BusTimerList), 1)
endif
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
adaptersetup = +
Set from = adapteroptions
adapteroptions = +
LoadLibrary "Disk 1" .\$(DialogDllName) hLib
ifint $(IsISA) == 0
read-syms FileDependentDlgPCI$(!STF_LANGUAGE)
Debug-Output $(InfName)" TP is "$(TPValue)
Debug-Output $(InfName)" LED0 is "$(LED0Value)
Debug-Output $(InfName)" LED1 is "$(LED1Value)
Debug-Output $(InfName)" LED2 is "$(LED2Value)
Debug-Output $(InfName)" LED3 is "$(LED3Value)
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
ui start "Inputdlg" $(hLib)
else
debug-output "read the isa dialog"
read-syms FileDependentDlg$(!STF_LANGUAGE)
Debug-Output $(InfName)" Bus is "$(BusScanValue)
Debug-Output $(InfName)" TP is "$(TPValue)
Debug-Output $(InfName)" LED0 is "$(LED0Value)
Debug-Output $(InfName)" LED1 is "$(LED1Value)
Debug-Output $(InfName)" LED2 is "$(LED2Value)
Debug-Output $(InfName)" LED3 is "$(LED3Value)
Debug-Output $(InfName)" DMA is "$(DMAChannelValue)
Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
ui start "InputDlg" $(hLib)
endif
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
debug-output $(DLGEVENT)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
ifint $(IsISA) == 1
set IOBaseAddrValue = $(Combo1Out)
set IRQValueValue = $(Combo2Out)
set DMAChannelValue = $(Combo3Out)
set FullDuplexValue = $(Combo4Out)
set BusTimerValue = $(Combo5Out)
set ExitButton = $(ButtonPressed)
set BusIndex = *($(RadioOut),1)
else
set FullDuplexValue = $(Combo1Out)
set BusTimerValue = $(Combo2Out)
set ExitButton = $(ButtonPressed)
set BusIndex = *($(RadioOut),1)
endif
Ifint $(BusIndex) == 1
Set BusScanValue = "PNP"
else-Ifint $(BusIndex) == 2
Set BusScanValue = "VESA"
else-Ifint $(BusIndex) == 3
Set BusScanValue = "ISA"
else-Ifint $(BusIndex) == 4
Set BusScanValue = "ALL"
Endif
Set Chk = *($(CheckItemsOut), 1)
Ifstr(i) $(Chk) == "ON"
Set TPValue = 1
Else
Set TPValue = 0
Endif
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
debug-output "before write registry"
set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))
set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
ifint $(IsISA) == 0
set NewValueList = {{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
else
set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
debug-output $(AdapterList)
ForListDo $(AdapterList)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
ifint $(IsISA) == 1
set HardwareDescription = $(GenericAdapterName)
set HardwareTitle = $(GenericAdapterName)
else
set HardwareDescription = $(GenericPCIAdapterName)
set HardwareTitle = $(GenericPCIAdapterName)
endif
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
debug-output "before write registry"
set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))
set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
ifint $(IsISA) == 0
set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
{LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
{LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
{LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),536875042},+
{SlotNumber, $(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
else
set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
{LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
{LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
{LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndForListDo
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\PCNTN3" $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
DeleteRegTree $(KeyProduct) ""
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "PCNTN3"
set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards
ifstr(i) $(IE_KeyNetcards) != ""
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
OpenRegKey $(IE_KeyNetcards) "" *($($),1) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo
set ProductName = *($(ProductNameInfo), 4)
Debug-Output " ProductName = "$(ProductName)
ifstr(i) $(ProductName) != "PCNTN3"
goto nextnetcard
endif
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
Debug-Output " ServiceName = "$(ServiceName)
OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
DeleteRegTree $(ServiceKey) ""
DeleteRegTree $(NetworkCardKey) ""
endif
nextnetcard = +
EndForListDo
endif
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\AMDPCI" $(MAXIMUM_ALLOWED) KeyProduct2
ifstr $(KeyProduct2) == $(KeyNull)
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect
set !NTN_InstallMode = Install
Shell "" InstallOption $(!STF_LANGUAGE) "AMDPCI" $(SrcDir) "YES" "YES" "NO"
set !NTN_InstallMode = Update
else
endif
else
endif
FreeLibrary $(NCPA_HANDLE)
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADAM.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
exit
[Install-Helpfile]
Debug-Output "At Install-Helpfile"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
[Install-Dll]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
[Source Media Descriptions]
1 = "Windows NT Server CD-ROM", TAGFILE = disk1
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-AMDPCI]
1,AMDPCN.SYS , SIZE=29296
[Files-Dll]
1,AMDDLG.DLL , SIZE=7168
[Files-hlp]
1,PCNET.HLP , SIZE=12288
[LanguagesSupported]
ENG
[OptionsTextENG]
AMDPCI = "Microdyne NE2500/NE5500 Series Ethernet Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
GenericAdapterName = "Microdyne NE2500 Series ISA/VESA Ethernet Adapter"
GenericPCIAdapterName = "Microdyne NE5500 Series PCI Ethernet Adapter"
GenericDriverName = "Microdyne NE2500/NE5500 Series Ethernet Adapter Driver"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductHardwarePCNTN3Description="AMD PCnet Family Driver"
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwarePCNTN3Title = $(GenericAdapterName)
DialogDllName = "amddlg.dll"
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
DMAChannelList = ^(DMAChannelChoices,1)
DMAChannelValues = ^(DMAChannelChoices,2)
LEDList = ^(LEDChoices,1)
LEDValues = ^(LEDChoices,2)
FullDuplexList = ^(FullDuplexChoices,1)
FullDuplexValues = ^(FullDuplexChoices,2)
BusTimerList = ^(BusTimerChoices,1)
BusTimerValues = ^(BusTimerChoices,2)
[DialogConstantsENG]
FunctionTitle = $(GenericAdapterName)$(GenericInfVersion)
Help = "&Help"
Exit = "Cancel"
OK = "&OK"
HelpContext = ""
Continue = "Continue"
Cancel = "&Cancel"
[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"
[FileDependentDlgENG]
DlgText = "Please select values for the following fields:"
Combo1Label = "I/O Port:"
Combo2Label = "IRQ Number:"
Combo3Label = "DMA Number:"
Combo4Label = "Full Duplex:"
Combo5Label = "Bus Timer:"
BigButton = "More pcntn3 BS >>"
CheckBox1 = "&TP"
Group1 = "&Bus to scan"
Radio1 = "PNP"
Radio2 = "VESA"
Radio3 = "ISA"
Radio4 = "ALL"
DlgType = "RadioCombination"
DlgTemplate = "PCNTN3"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 1
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
Combo3List = $(DMAChannelList)
Combo3Out = $(DMAChannelValue)
Combo4List = $(FullDuplexList)
Combo4Out = $(FullDuplexValue)
Combo5List = $(BusTimerList)
Combo5Out = $(BusTimerValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List,Combo5List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out,Combo5Out}
EditTextIn = ""
EditTextLim = ""
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "9",9
IRQ_5 = "10",10
IRQ_6 = "11",11
IRQ_7 = "12",12
IRQ_8 = "15",15
IRQ_9 = "Auto_Scan",0
[IOBaseAddrChoices]
IOBase_1 = "0x200",512
IOBase_2 = "0x220",544
IOBase_3 = "0x240",576
IOBase_4 = "0x260",608
IOBase_5 = "0x280",640
IOBase_6 = "0x2a0",672
IOBase_7 = "0x2c0",714
IOBase_8 = "0x2e0",746
IOBase_9 = "0x300",768
IOBase_10 = "0x320",800
IOBase_11 = "0x340",832
IOBase_12 = "0x360",864
IOBase_13 = "0x380",896
IOBase_14 = "0x3a0",928
IOBase_15 = "0x3c0",960
IOBase_16 = "0x3e0",992
IOBase_17 = "Auto_Scan",0
[DMAChannelChoices]
DMAChannel_1 = "3",3
DMAChannel_2 = "5",5
DMAChannel_3 = "6",6
DMAChannel_4 = "7",7
DMAChannel_5 = "Auto_Scan",0
[LEDChoices]
LED_1 = "Default",65536
LED_2 = "0x0",0
LED_3 = "0x2",2
LED_4 = "0x4",4
LED_5 = "0x8",8
LED_6 = "0x10",16
LED_7 = "0x20",32
LED_8 = "0x30",48
LED_9 = "0x34",52
LED_10 = "0x40",64
LED_11 = "0xc0",192
LED_12 = "0x4088",16520
LED_13 = "0xb0",176
LED_14 = "0x21",129
[FullDuplexChoices]
FULLDUPLEX_1 = "OFF",1
FULLDUPLEX_2 = "AUI",2
FULLDUPLEX_3 = "UTP",3
FULLDUPLEX_4 = "Default",0
[BusTimerChoices]
BUSTIMER_1 = "5",5
BUSTIMER_2 = "6",6
BUSTIMER_3 = "7",7
BUSTIMER_4 = "8",8
BUSTIMER_5 = "9",9
BUSTIMER_6 = "10",10
BUSTIMER_7 = "11",11
BUSTIMER_8 = "12",12
BUSTIMER_9 = "13",13
BUSTIMER_10 = "Default",0
[FileDependentDlgPCIENG]
FunctionTitle = $(GenericPCIAdapterName)$(GenericInfVersion)
DlgText = "Please select values for the following fields:"
Combo1Label = "Full Duplex:"
BigButton = "More of pcntn3 >>"
CheckBox1 = "&TP"
DlgType = "RadioCombination"
DlgTemplate = "PCNTN3PCI"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 1
Combo1List = $(FullDuplexList)
Combo1Out = $(FullDuplexValue)
Combo3List = $(LEDList)
Combo3Out = $(LED0Value)
Combo4List = $(LEDList)
Combo4Out = $(LED1Value)
Combo5List = $(LEDList)
Combo5Out = $(LED2Value)
Combo6List = $(LEDList)
Combo6Out = $(LED3Value)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextIn = ""
EditTextLim = ""
[LEDChoices]
LED_1 = "Default",65536
LED_2 = "0x0",0
LED_3 = "0x2",2
LED_4 = "0x4",4
LED_5 = "0x8",8
LED_6 = "0x10",16
LED_7 = "0x20",32
LED_8 = "0x30",48
LED_9 = "0x34",52
LED_10 = "0x40",64
LED_11 = "0xc0",192
LED_12 = "0x4088",16520
LED_13 = "0xb0",176
LED_14 = "0x21",129
[FullDuplexChoices]
FULLDUPLEX_1 = "OFF",1
FULLDUPLEX_2 = "AUI",2
FULLDUPLEX_3 = "UTP",3
FULLDUPLEX_4 = "Default",0
[BusTimerChoices]
BUSTIMER_1 = "5",5
BUSTIMER_2 = "6",6
BUSTIMER_3 = "7",7
BUSTIMER_4 = "8",8
BUSTIMER_5 = "9",9
BUSTIMER_6 = "10",10
BUSTIMER_7 = "11",11
BUSTIMER_8 = "12",12
BUSTIMER_9 = "13",13
BUSTIMER_10 = "Default",0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.